Breakage of λ-DNA by inorganic tin and organotin compounds as environmental pollutants

In proportion to the environmental pollution problems caused by organotin compounds, the genotoxicities of tin compounds in the environments have become of interest so as to estimate their safety in recent years. In this work, isolated λ-DNA (double-strand DNA) was incubated with inorganic tin(II) and tin(IV) and five organotin compounds [n-butyltin trichloride, di(n-butyltin) dichloride, methyltin trichloride, dimethyltin dichloride and trimethyltin chloride] in reaction systems both with and without hydrogen peroxide (H₂O₂) content. The tin compounds tested in this study did not induce DNA breakage in the absence of hydrogen peroxide. Divalent inorganic tin (SnCl₂) and tetravalent inorganic tin (SnCl₄) caused DNA breakage in the presence of hydrogen peroxide (10 mM), and the DNA damage activity of inorganic tin was much more potent in divalent inorganic tin (SnCl₂) than in tetravalent inorganic tin (SnCl₄). Divalent inorganic tin (SnCl₂) induced DNA breakage in a concentration-dependent fashion at concentrations greater than 0.1 mM of SnCl₂ in the presence of hydrogen peroxide (10 mM). DNA breakage was not caused by n-butyltin compounds and methyltin compounds either in the presence or in the absence of hydrogen peroxide.     

Co-doped In2O3 thin films: Room temperature ferromagnets

Laser-ablated Co-doped In₂O₃ thin films were fabricated under various growth conditions on R-cut Al₂O₃ and MgO substrates. All Co:In₂O₃ films are well-crystallized, single phase, and room temperature ferromagnetic. Co atoms were well substituted for In atoms, and their distribution is greatly uniform over the whole thickness of the films. Films grown at 550 °C showed the largest magnetic moment of about 0.5 μ_B/Co, while films grown at higher temperatures have magnetic moments of one order smaller. The observed ferromagnetism above room temperature in Co:In₂O₃ thin films has confirmed that doping few percent of magnetic elements such as Co into In₂O₃ could result in a promising magnetic material.     

源气体对沉积的a-C∶F∶H薄膜结构的影响

采用微波电子回旋共振等离子体化学气相沉积(MWPECRCVD)方法,使用不同的源气体(CHF3CH4,CHF3C2H2,CHF3C6H6)体系制备了aC∶F∶H薄膜.由于CH4,C2H2,C6H6气体在等离子体中的分解反应不同导致了薄膜的沉积速率和结构上的差异.红外吸收谱的结果表明,用C6H6CHF3作为源气体沉积的薄膜中几乎不含H,而用C2H2CHF3所沉积的薄膜中的含氟量最高,其相应的CF振动峰位向高频方向偏移.薄膜的真空退火结果表明,aC∶F∶H薄膜的热稳定性除了取决于薄膜的CC键浓度外,还与CC键 关键词： 氟化非晶碳膜 电子回旋共振化学气相沉积 红外吸收光谱     

A novel approach to thermal Analysis of Thin films

A novel instrument is described called the Thin film Analyser (TFA) which quantitatively measures changes in mechanical and rheological properties of drying films in-situ on a test panel. It is based around a simple force-sensing device, capable of carrying various probes, which can be positioned in anX-Y plane over the panel. Temperature control is achieved by means of a heating block under the sample. By imposing a thermal gradient along the block, measurements can be obtained at a series of temperatures in a single experiment. Several applications of the TFA to the drying of curable and latex-based coatings are discussed, as well as some more specialized uses. The TFA concept represents a novel approach to the thermal analysis of thin films.The authors gratefully acknowledge the design, engineering and software development work of the Instrument Group at ICI Paints, in particular John Hayton, Neil Burrows, Tony Evans and Ian Francis, who have now built three versions of the TFA.     

Polyolefins with controlled environmental degradability

Antioxidants and stabilisers, developed to increase the durability of polyolefins, in combination with prooxidant transition metal complexes provide industrial products with widely variable but controlled lifetimes. The low molar mass oxidation products formed during photo-oxidation and thermal oxidation are biodegradable and oxo-biodegradable polyolefins are now widely used in agricultural applications and in degradable packaging as examples. The scientific basis for the performance of oxo-biodegradable materials is explained with reference to naturally occurring macromolecules. Comparison with hydro-biodegradable materials is made and the need is demonstrated for performance standards to be developed that mimic nature's resource recovery mechanism, that of oxo-biodegradation.     

Morphological and chemical study of the initial growth of CdS thin films deposited using an ammonia-free chemical process

We study the initial growth stages of CdS thin films deposited by an ammonia-free chemical bath deposition process. This ammonia-free process is more environmentally benign because it reduces potential ammonia release to the environment due to its high volatility. Instead of ammonia, sodium citrate was used as the complexing agent. We used atomic force microscopy (AFM), Rutherford backscattering (RBS) and X-ray photoelectron spectroscopy (XPS) to investigate the morphological and chemical modifications at the substrate surface during the first initial stages of the CdS deposition process. Additionally, X-ray diffraction (XRD) and optical transmission spectroscopy measurements were carried out to compliment the study. XPS results show that the first nucleation centers are composed by Cd(OH)₂ which agglomerate in patterns of bands, as demonstrated by AFM results. It is also observed that the conversion to CdS (by anionic exchange) of the first nucleus begins before the substrate surface is completely covered by a homogenous film.     

Influence of humic substances on sorption and methylation processes of inorganic- and organo-tin species

The influence of humic substances on sorption and methylation processes for inorganic- and organotin species is presented. Four sediment samples from different locations of the Rivers Elbe, Mulde and Spittelwasser, Germany, with different organotin and humic contents were selected to extract the humic and fulvic acids. The various fractions—the original sediment, the humic acid, the fulvic acid and the residual sediment—were analysed for their organotin content. The individual buyltin species show quite different distribution patterns. Monobutyltin is found mostly associated with humic acids. Dibutyltin shows a nonunique behaviour. At low total organotin content, dibutyltin is found bonded to humic and fulvic acids, whereas at high organotin content dibutyltin is distributed more with the residual sediment. Most of the tributyltin remains in the sediment unextracted; only small quantities of it are in the fulvic acid fraction. Tetrabutyltin is only in the humic acid fraction when it binds to humic matter; it mostly remains in the sediment. General observations indicate that ionic butyltin species bind to fulvic acids whereas the non-polar tetrabutyltin is not found in the fulvic acid fractions in any of the samples. The appearance of monomethyl- and dimethyl-tin species in the humic and fulvic acid fractions after the alkaline extraction was surprising. There is a correlation between the humic content of the sample and the formation of methyltin species. Evidence is provided by experiments that humic substances act as methylation agents.     

Chemical synthesis of p-type nanocrystalline copper selenide thin films for heterojunction solar cells

Nanocrystalline thin films of copper selenide have been grown on glass and tin doped-indium oxide substrates using chemical method. At ambient temperature, golden films have been synthesized and annealed at 200 °C for 1 h and were examined for their structural, surface morphological and optical properties by means of X-ray diffraction (XRD), scanning electron microscopy and UV-vis spectrophotometry techniques, respectively. Cu_2−xSe phase was confirmed by XRD pattern and spherical grains of 30 ± 4 - 40 ± 4 nm in size aggregated over about 130 ± 10 nm islands were seen by SEM images. Effect of annealing on crystallinity improvement, band edge shift and photoelectrochemical performance (under 80 mW/cm² light intensity and in lithium iodide electrolyte) has been studied and reported. Observed p-type electrical conductivity in copper selenide thin films make it a suitable candidate for heterojunction solar cells.     

Characteristics of Ti0.97Co0.03O2:Sb0.01 dilute magnetic semiconducting thin films deposited at 500 °C by pulsed laser deposition

Epitaxial Ti_0.97Co_0.03O₂:Sb_0.01(TCO:Sb) films were deposited on R-Al₂O₃ (1 1 0 2) substrates at 500 °C in various deposition pressures by pulsed laser deposition. The solubility of cobalt within the films increases with decreasing deposition pressure at a deposition temperature of 500 °C. The TCO:Sb films deposited at 5×10⁻⁶ Torr exhibit a p-type anomalous Hall effect having a hole concentration of 6.1×10²²/cm³ at 300 K. On the other hand, films deposited at 4×10⁻⁴ Torr exhibits an n-type anomalous Hall effect having an electron concentration of about 1.1×10²¹/cm³. p- or n-type DMS characteristics depends on the change of the structure of TCO:Sb films and the solubility of Co is possible by controlling the deposition pressure.     

In‐line monitoring of UV photopolymerization with a quartz crystal resonator

An in‐line monitoring device using a quartz crystal resonator for thin film polymerization was proposed, and its performance has been evaluated by implementing in the UV polymerization of 2‐hydroxyethyl methacrylate with a photoinitiator of 1‐chloroanthraquinone. Because the variation of resonant resistance of the resonator is proportional to the square root of viscosity change that is closely related to the polymerization degree, the resistance can be used as a measure of the polymerization degree. The resistance measurements were compared with the outcome of instrumental analyses of polymerization degree using an FTIR spectrometer and a gel permeation chromatograph. The experimental results showed that the resistance measurements were consistent with the experimental outcome of the instrumental analyses, and this indicates the effectiveness of the proposed device. Owing to the simplicity and availability of the resonator system, its wide utilization in the monitoring of a variety of film polymerization processes, including photoresistor application, is expected. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2428–2439, 2006