Influence of velocity and surface temperature of alumina particles on the properties of plasma sprayed coatings

In this paper are described the main characteristics of the plasma spraying process of alumina deposits, i.e., the temperature and flow field of the plasma jets obtained with the classical spraying torches, the injection of the particles into the plasma jet, the particle surface temperature and velocities in the plasma (measured for calibrated alumina particles), and the coating generation. The measurements on the alumina particles are compared with the predictions of a mathematical model. The experimental and computed particle velocities are in rather good agreement. However, this is not the case for the particle surface temperature. Possible reasons for the discrepancy are proposed (influence of the carrier gas, thermophoretic forces, and poor penetration of the particles into the plasma core even for an injection velocity twice that of the optimal calculated one, as shown by recent measurements). Finally the correlations between the particle velocities and surface temperature, and the properties of the alumina coating (porosity, crystal structure, mechanical properties) are studied.     

不同添加物和制备方式对Al2O3热稳定性的影响

通过水溶液成胶和丙三醇络事助成胶制备了不同的结构的γ－Ａｌ２Ｏ３,研究了Ｌａ,Ｓｉ,Ｂａ以及Ｌａ,Ｓｉ和Ｌａ,Ｂａ双组分改性对它们结构热稳定的作用,讨论了改性元素的引入方式及硅铝比的影响。结果表明,丙三醇络合助成胶能明显提高Ａｌ２Ｏ３的比表面积和孔径,并能显著改善Ａｌ２Ｏ３的热稳定性。     

Reactions of Hydroxyazolidines with π-Donor Heterocycles. 3. Reaction of 1-Acetyl-5-hydroxypyrazolidines with Oxindoles

The reaction of oxindoles with 5-hydroxypyrazolidines on the surface of potassium fluoride-modified alumina leads to 3-(5-pyrazolidinyl)oxindoles. The structure of these products was studied.     

纳米有序体系的模板合成及其应用

评述了以含有高密度的纳米柱形孔道的Al₂O₃膜和有机聚合物膜为模板,制备金属、合金、氧化物、半导体和聚合物及其复合组份的一维纳米结构有序阵列的几种方法、纳米结构的性质和应用的研究进展。可用于模板合成的方法有电化学沉积法、化学镀、化学聚合、化学气相沉积和溶胶-凝胶法等。取决于孔壁和所填充材料的化学性质,所得阵列既可以是由纳米管也可以是由纳米线组成。这样的有序阵列在光学、磁学、催化及电化学等领域有着重要的应用前景。制备新型复合纳米结构有序阵列、开展纳米器件的研制是模板合成研究领域的重要方向。     

高活性固载化三氯化铝催化合成金刚烷

首次用固载化AlCl3催化剂催化桥式四氢双环戊二烯异构化反应合成金刚烷.结果表明,以γ-Al2O3为载体的固载化AlCl3催化剂在较低的反应温度(140℃)下具有较高的催化活性和生成金刚烷的选择性,桥式四氢双环戊二烯的转化率达到100%,金刚烷的选择性为17.7%;而以Si O2作为载体制备的催化剂,几乎没有金刚烷生成.     

Al2O3／WO3／ZrO2固体强酸催化剂对正丁烷异构化的催化性能

 通过沉淀、回流、浸渍和焙烧等步骤制备了Al2O3／WO3／ZrO2固体强酸催化剂．采用XRD，N2吸附，UV－Vis光谱，NH3－TPD和H2－TPR等技术测定了Al2O3对WO3／ZrO2催化剂的结构、表面酸性、氧化还原性及正丁烷异构化反应性能的影响．结果表明，在WO3／ZrO2中引入适量的Al2O3对其表面酸强度及酸量无显著影响，但可使催化剂中的ZrO2组分以稳定的四方相形式存在，并能有效地抑制催化剂中WO3的聚集长大，从而提高催化剂的稳定性和正丁烷异构化的转化率和选择性．添加铂于Al2O3／WO3／ZrO2中可进一步提高其催化性能．还考察了催化剂的焙烧温度、Al含量、反应温度和反应气氛对正丁烷异构化反应的影响．     

Cu－Zn／γ－Al2O3催化剂的制备及其在选择加氢反应中的催化性能

 通过浸渍法制备了不同Cu／Zn比的γ－Al2O3和改性γ－Al2O3负载的Cu－Zn催化剂，并用XRD，XPS和SEM等手段对催化剂进行了表征．XRD表征结果表明，还原活化前催化剂中的Cu和Zn分别以CuO和ZnO的形式存在；还原活化后Cu以单质的形式存在；催化剂失活后，单质Cu又转变成CuO．XPS和SEM分析结果表明，催化剂中金属的价态及颗粒的形貌在反应前后发生了变化．所制备的催化剂在糠醛加氢制糠醇反应中表现出较高的选择性．用Co改性的γ－Al2O3负载的Cu－Zn催化剂不仅具有较高的催化活性和选择性，而且还呈现出较长的寿命．催化剂中的Cu晶相是催化活性中心；催化剂中的Cu晶相转变成CuO和烧结是催化剂失活 的主要原因．     

Chemical environment of copper at the surface of a CuAl2 model alloy: XPS,MEIS and TEM analyses

Air‐formed oxide on a CuAl₂ model alloy is shown to be free of copper species, with copper enriching in the alloy. With thickening of the oxide by anodizing, copper enriches further to a critical concentration at which its oxidation proceeds with incorporation of Cu(II) species into the film. Such species migrate more rapidly through the film than aluminium species. Incorporation of copper species is associated with generation of oxygen gas within the film and subsequent film rupture is due to release of the gas. Reduction of Cu(II) to Cu(I) species during XPS analysis is characterized and the accelerating role of charge neutralizing is highlighted. Copyright © 2004 John Wiley & Sons, Ltd.     

EPR study of ceria–silica and ceria–alumina catalysts: Localization of superoxide radical anions

Oxygen adsorption experiments were performed on evacuated and prereduced CeO₂/SiO₂ and CeO₂/Al₂O₃ catalysts with and without platinum. Considerable amounts of the superoxide radical ions were stabilized on all the samples. Signal parameters suggest Ce⁴⁺–O₂⁻ positioning for all detectable superoxide species. Physisorbed oxygen broadens O₂⁻ signal beyond detection for all the alumina-based samples, while the same procedure for all the silica-based samples did not change signal shape of O₂⁻ species. Detectable O₂⁻ species are localized in the bulk of ceria and the nature of support (silica or alumina) determines the number of oxygen vacancies and the rate of electron transfer. XRD data suggest that for alumina-based samples small and/or thin islands of ceria dominate, while comparatively large ceria particles are stabilized on the surface of silica-based samples with the same ceria content. Average size of ceria crystallites is still not determining factor and cannot account for the observed differences. Higher concentrations of paramagnetic species may be stabilized on alumina-based samples and thus, sensor-like behavior towards gaseous oxygen at room temperature was detected for them—oxygen admission reversibly changes superoxide lineshape. For silica samples, only minor changes of O₂⁻ lineshapes were typical upon the change of the partial pressure of oxygen at ambient and low temperatures. Addition of platinum has little effect on parameters of the O₂⁻ signal, except an enhancement of the superoxide decay in the reducing media. Possible site for O₂⁻ stabilization inside the lattice of CeO₂ was proposed and relevance of the observed effects to the redox catalysis discussed.     

高比表面积窄孔分布氧化铝的制备研究 Ⅰ.沉淀条件的影响

 以硫酸铝液为原料，以氨水、氢氧化钠和铝酸钠为碱沉淀剂，采用pH摆动法制备了高比表面积、大孔径、窄孔分布、大孔体积氧化铝，考察了沉淀剂、沉淀温度及沉淀时酸侧pH值对氧化铝物性的影响，并对pH摆动法与等pH沉淀法的结果进行了比较．结果表明，通过改变制备参数可以获得高比表面积、大孔体积的氧化铝，当沉淀温度为70℃，pH摆动3或4次时，氧化铝的孔体积可高达1．0ml／g，比表面积仍大于300m2／g．用pH摆动法制得的样品比用等pH沉淀法制得的样品容易酸溶，对挤压成型有利．不同样品在酸溶液中的分散性表明，用氨水沉淀剂可获得相对较小的沉淀粒子．改变沉淀时酸侧的pH值，可导致沉淀粒子的结构发生变化．