薄层色谱-紫外可见分光光度法同时测定食品中的苏丹红Ⅰ～Ⅳ

建立了测定食品中苏丹红色素含量的新方法——薄层色谱-紫外可见分光光度法,对影响测定的因素如样品预处理方式、展开剂等进行了讨论,检测苏丹红Ⅰ~Ⅳ的线性范围分别为0.5~14μg/mL,0.5~10μg/mL,0.5~15μg/mL,0.5~15μg/mL,线性相关系数均为0.999,检出限均为0.05μg/mL。该方法测定结果与国家标准方法测定结果基本一致。     

四元缔合物体系薄层树脂相分离与光度法联用测定痕量钴

提出了在酸性条件下 (pH=5.0),利用阳离子交换树脂-丁二酮肟-碘-钴四元体系,通过薄层树脂相光度法测定钴的新方法。本法灵敏度高 (e454=1.7105L/molcm),比水相光度法提高14倍,精密度理想 (测定2.0礸/ml Co(II) 6次,RSD=1.3%),选择性好。实测药品VB12及天然水中钴,线性范围0.024~2.0礸/ml (定容50ml),检出限10.4ng/ml。     

Double Electric Layer on Liquid Sn-Ga Alloy in Acetonitrile Solutions of Electrolytes

The structure of the double electric layer (DEL) on a liquid dropping Sn-Ga electrode containing 8 at. % of Sn is studied in acetonitrile (AN) solutions of electrolytes. It is shown that the transition from aqueous to AN solutions of electrolytes makes it possible to expand the region of investigation of parameters of DEL on an Sn-Ga electrode from negative charges to a zero charge and to small positive charges. As follows from the obtained data, throughout the entire interval of charges studied, an excess, as compared with an Hg electrode, chemisorption interaction (Sn-Ga)-AN is absent. It is established that the distance of the closest approach of AN dipoles to an ionic core increases upon going from Hg to Sn-Ga to Ga. The Ga, Bi-Ga, and Sn-Ga electrodes, which possess close values of the “electrochemical work function,” are used as an example to show that the metal-solvent chemisorption interaction increases with decreasing distance of the closest approach of its dipoles to the ionic core of the metal. The effect of this factor becomes stronger as the donor number of the solvent increases.     

薄层层析法分离菊芋汁中低聚糖

采用薄层层析法(TLC)分离菊芋汁中的低聚糖成分。固定相为硅胶板GF254,展层剂为V正丁醇∶V异丙醇∶V乙酸∶V水=7∶5∶2∶4,显色剂为苯胺(4 mL)-二苯胺(4 g)-磷酸(20 mL)(溶于200 mL丙酮中)试剂。该展层体系可用于快速层析分离菊芋汁中的混合低聚糖,经过两次展层可达到良好分离结果。     

Dual microband electrodes: current distributions and diffusion layer ‘titrations’. Implications for electroanalytical measurements

The simulation of transport to double microband electrodes in generator–collector mode is reported focusing especially on the ‘titration curve’ approach to electroanalysis in which a titrant is electrogenerated from a redox active precursor on the generator electrode and reacts homogeneously with the target analyte. The current on the detector electrode reflects the amount of titrant ‘surviving’ passage between the two electrodes. The form of the titration curve – plots of detector current as a function of generator current – is shown to be highly sensitive to the electrode kinetics of the redox couple driven at the generator electrode. Accordingly the naïve use of such methodology for analysis without accompanying simulation and kinetic analysis is fraught with danger. Use of the conformal mapping approach in combination with the ADI method for investigation of the ‘titration’ current distributions at the double band system gives fast and precise simulation of this and similar problems. Convergence analysis is described which allows for the automatic selection of the simulation grid size so as to obtain a chosen accuracy (for example 1%) of the current for all experimentally meaningful values of the geometrical and physico-chemical parameters of the system to be investigated.     

Scratch and Abrasion Resistant Coatings on Plastic Lenses—State of the Art,Current Developments and Perspectives

The manufacturing of ophthalmic lenses is one of the most important markets worldwide and, therefore, strong research efforts are undertaken to continuously improve the quality of the products, either silicate glasses or organic polymer lenses. Hybrid sol-gel based materials play a major role in this highly competitive field and have contributed significantly to the commercial success of the organic base materials. Recent developments concern fast curing and patternable coatings that might soon become part of this business. The compatibility of hybrid sol-gel materials either with organic dyes or with inorganic vacuum borne coatings offers further possibilities to develop highly sophisticated lenses meeting not only customer needs like perfect corrective function, high optical quality and protection, but also high durability as well as cosmetic and decorative aspects. An overview and a few recent developments are outlined below.     

Influence of Urbach Energy,Temperature, and Longitudinal Position in the Active Layer on Carrier Diffusion Length in Perovskite Solar Cells

The diffusion length of charge carriers in the active layer of a perovskite solar cell (PSC) of the structure Glass/PEDOT: PSS/CH₃NH₃PbI₃/PC60BM/Al is modelled. It is found that the diffusion length depends on the position x in the active layer measured from the PEDOT: PSS interface, Urbach energy and temperature. By varying the voltage in the range from zero to , it is shown that the dependence of diffusion length on the position x in the active layer reduces at higher voltage. The combined influence of applied voltage and temperature on the diffusion length of charge carriers is investigated and it is found that in the low voltage range the diffusion length is temperature independent, but it becomes significantly temperature dependent at higher voltages. Also, it is found that the diffusion length decreases as the applied voltage increases and this reduction becomes much more significant at higher voltage and temperatures. The combined influence of applied voltage and Urbach energy on diffusion length of charge carriers reveals that the diffusion length decreases when both the applied voltage and Urbach energy increase. However, the reduction in the diffusion length due to the increase in Urbach energy becomes less significant at higher voltage.     

High temperature corrosion behaviour of M(Co,Ni)CrAIY-coatings on high temperature materials-microanalytical investigations

In our former investigations, the phenomenon high temperature corrosion (HTC) was described exemplarily on selected materialcoating combinations for blades of stationary gas turbines, mainly in the temperature region of up to 750° C. To answer the question, in which manner higher gas inlet and/or higher material surface temperature would influence the HTC behaviour, a special analytical technique—the integral layer profile analysis—was introduced to ameliorate concentration profile methods. By examining IN 738 LC specimens with CoCrAlY plasma spray coating, stressed by hot gas at 900° C, the limits of this system are shown by explaining the corrosion mechanism; the method is also used for other systems, e.g. U 520 with NiCrAlY coating at 750° C.     

Formal Mathematical Analysis of the Existence of the Common Intersection Point in Relation to Determining the Parameters Describing Ion Adsorption at the Oxide/Electrolyte Interface: Comparison of the Triple and Four-Layer Models

For most oxide/electrolyte systems potentiometric titration curves measured for different ionic strengths have a Common Intersection Point (CIP) which corresponds to the Point of Zero Charge (PZC). However, there are systems where a CIP exists but the surface charge at this point does not equal zero (PZC CIP). In this paper theoretical analysis of the systems in which the PZC and CIP do not coincide is presented. It is based on the well-known 2-pK surface charging approach and Triple Layer Model (TLM) as well as the Four Layer Model (FLM) of the electric double layer. The appropriate mathematical criterion for CIP existence was applied with detailed derivations, both for TLM and FLM. Having determined in this manner the parameter values, one can draw proper conclusions about the features of oxide/electrolyte adsorption systems, in which PZC and CIP do not coincide. The values of adsorption parameters are found by fitting simultaneously the obtained theoretical expressions to both of the experimental titration isotherms, and to the individual isotherms of electrolyte cation adsorption measured using radiometric methods.     

Application of self-assembly for replacing chromate in corrosion protection of zinc

Due to the toxic and carcinogenic properties of hexavalent chromium ion, the corrosion protection with chromating technique needs replacement. Several environmentally friendly alternative metal pretreatments have already been proposed. One of these methods is the application of self-assembling molecules to form mono- or multilayers on the metal surfaces. These layers can prevent metal dissolution due to their dense and stable structure. The objective of our studies was to protect zinc surface against corrosion, with a thin phosphonate layer. Aqueous solutions of diphosphonic acid with different alkyl chain lengths were applied with different treatment times. The layer formation, stability, and corrosion protection of these films were monitored by electrochemical impedance spectroscopy and the effect of 1,5-diphosphono-pentane (DPP) on zinc was studied by polarization curves. The wetting properties were determined by static contact angle measurement. 1,5-Diphosphono-pentane forms a thin layer, with a pronounced protective ability in neutral aqueous solutions. The application of self-assembling molecules can be a promising method to replace the chromating technique on zinc surface.