Monodisperse chloromethyl-functionalized macroporous polymer particles by seeded polymerization in aqueous media

This study presents a method to produce monodisperse chloromethyl-functionalized macroporous poly(styrene-co-divinylbenzene) polymer particles by seeded polymerization in aqueous media. We observed that the molecular structure of polystyrene seed particles, the composition of the secondary monomer mixtures, and the type of solvents were very important factors that determine the morphology and porosity of the final particles. This study proposes that the molecular chemistry of polystyrene seed polymers, increasing molecular weight or crosslinking, is another factor that can control the porosity of the final particles. Also, the selection of a poor solvent was effective in forming the larger surface area. In this study, it was confirmed that the chloromethyl groups introduced on the surface of porous particles were quantified chemically and their effective incorporation had a close relationship with the surface area.     

Conductivity Studies of Dilute Aqueous Solutions of Oxalic Acid and Neutral Oxalates of Sodium, Potassium, Cesium, and Ammonium from 5 to 35°C

Conductivity measurements of oxalic acid and neutral oxalates (disodium oxalate, dipotassium oxalate, dicesium, and diammonium oxalate) were performed on dilute aqueous solutions, c < 3 × 10^–3 mol-dm^–3, from 5 to 35°C. These data and those available from the literature were analyzed in terms of dissociation steps of oxalic acid, the Onsager conductivity equation for neutral oxalates, the Quint–Viallard conductivity equation for the acid, and the Debye–Hückel equation for activity coefficients, to give the limiting equivalent conductances of bioxalate anion ;(HC₂O₄ ^–) and oxalate anion (1/2C₂O₄ ^2–) and the corresponding dissociation constants K ₁ and K ₂.     

Contactless Conductivity Detection in Capillary Electrophoresis: A Review

The popularity of contactless conductivity detection in capillary electrophoresis has been growing steadily over the last few years. Improvements have been made in the design of the detector in order to facilitate its handling, to allow easy incorporation into available instruments or to achieve higher sensitivity. The understanding of its fundamental working principles has been advanced and the detection approach has also been transferred to lab‐on‐chip devices. The range of applications has been extended greatly from the initial work on small inorganic ions to include organic species and biomolecules. Concurrent determination of cations and anions by dual injection from opposite ends has been demonstrated as well as sample introduction by using flow‐injection systems for easy automation of the process.     

双亲性三嵌段共聚物/水体系超分子结构的研究

利用小角 X-射线散射技术研完了双亲性聚氧化乙烯-聚二甲基硅氧烷-聚氧化乙烯三嵌段共聚物/水体系在高浓度的溶致性液晶相,测定了亲水区、疏水区随浓度和结构变化的尺寸等超分子结构参数。用简单的几何模型可满意地解释实验结果。     

螺［异苯并呋喃－1（3H），9＇－（9H）－2＇－N，N－二苄胺基－6＇－二乙胺基占吨］－酮－3的合成及晶体结构研究

合成了螺［异苯并呋喃－１（３Ｈ），９＇－（９Ｈ）－２＇－Ｎ，Ｎ－二苄胺基－６＇－二乙胺基占吨］－酮－３，Ｃ＿（３７）Ｈ＿（３４）Ｎ＿２Ｏ＿３，单斜晶系，空间群Ｃｃ，晶体学参数为ａ＝１６．８２６（４），ｂ＝１０．６４８（４），ｃ＝１７．６１８（７），β＝９２．２５（２）°，Ｖ＝３１５４（２），Ｚ＝４，Ｍ＿ｒ＝５６６．７，Ｄ＿ｘ＝１．１９ｇ／ｃｍ３，Ｆ（０００）＝１２００。结构由直接法解出，偏离因子Ｒ＝０．０８０。分子由占吨和异苯并呋喃两部分组成Ｙ形结构，占吨部分相连的苄基的两个苯环位于占吨部分的两侧。     

Molecular structure of potassium [N,N′-bis(salicylideneamino)nitroguanidonate-N,N′,-O,O′]nickel(ii), the product of condensation of (salicylideneamino)nitroguanidine with salicylaldehyde on a Ni2+ ion template

The crystal structure of the product of the condensation of (salicylideneamino)nitroguanidine with salicylaldehyde on a Ni²⁺ ion template, K[Ni(C₁₅H₁₀N₅O₄)] · DMF, has been studied. It was established that a planar Ni complex, consisting of isolated [NiL]^– anions and solvated [K⁺ · DMF] cations, is formed. The negative charge of the anion is localized mainly on the O atoms of the nitro group. The nitroguanidine fragment of the ligand occurs in the tautomeric form, which was not reported previously.Deceased in 1995Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 2273–2277, September, 1996.     

On the pressure-induced phase transformation in the structure II clathrate hydrate of tetrahydrofuran

A high-pressure phase of the clathrate hydrate of tetrahydrofuran was prepared by freezing a liquid phase of overall composition THF · 7 H₂O under a pressure of 3.0 kbar, or by pressurizing the solid structure II THF hydrate of 255K to 3.4 kbar. Unfortunately, the products recovered at 77K were always mixed phase materials as shown by X-ray powder diffraction. A number of diffraction lines could be indexed in terms of the cubic structure I hydrate with a slightly expanded lattice parameter, 12.08 Å, giving some support to Dyadin's idea that the high pressure phase transition involves a conversion of Structure II to Structure I. Other phases observed in the recovered product include Ice IX and amorphous materials. The reversion of the high pressure sample to the structure II hydrate was followed by differential scanning calorimetry. At ambient pressure, the high pressure sample converts slowly back to Structure II hydrate event at 77K.NRCC No. 35786.     

Effect of film thickness and supercooling on the performance of cholesteryl cinnamate liquid crystal capillary columns

Improved separations of the isomers of olefinic aliphatic insect pheromones were obtained on cholesteryl cinnamate glass capillary columns by operating in the supercooled temperature range of the liquid crystal. Capillary columns were prepared with varying film thickness of the stationary phase; choice of the correct film thickness ensured optimum retention for a wide range of compounds within the most effective temperature range of the liquid crystal. The deactivation procedures described made the liquid crystal columns suitable for separation of the geometric isomers of polar and nonpolar compounds.     

Molecular Structure of 1,3,5-Tris (Trimethylstannyl) Benzene: An Electron Diffraction Study

The molecular structure of 1,3,5-tris (trimethylstannyl) benzene has been determined by gas-phase electron diffraction. The C — C bond length is in good agreement with that in benzene. In agreement with the somewhat electron-releasing character of the substituents, the endocyclic bond angles at the substituents are somewhat smaller than 120°. The mean value of Sn — C bond lengths is greater than that in tetraphenyltin and tetramethyltin. The SnMe₃ groups appear freely rotating around the C_aryl — Sn bonds. The following bond lengths (r _g) and bond angles were determined: (Sn — C)_mean 2.150 ± 0.007 Å, C — C 1.399 ± 0.005 Å, (C — H)_mean 1.105 ± 0.006 Å, < C — C(Sn) — C 117.7 ± 1.7º, < C_aryl — Sn — C_methyl 106.7 ± 0.7º < Sn — C — H 111.5 ± 0.9º.     

Steam-carbon gasification catalyzed by calcium: Assessment of the porous structure of active carbons from plum stones and synthetic active carbons

A need for an elaboration of the methods for synthesis and characterization of activated carbons with a requisite porous structure has existed for a long time. One of the methods giving possibility for creating controlled mesopore and micropore structures deals with the steam gasification of various carbon materials. In this work the effects of calcium catalyst on the catalytic steam gasification of active carbons from plum stones and porous polymers are presented. Determination of micropores capacity and specific adsorption in mesopores have been performed by means of the _s method, but adsorption on the heterogeneous solids was described by the integral equation with various local isotherms. This equation has been solved by the regularization method. Based on this method the changes in structural parameters of active carbons depending on the amount of calcium catalyst were estimated.Nomenclature d width of slit-like micropore - F(x) distribution function of the half-width - p vapor pressure of sorbate - p/p _N relative pressure - PSAC Plum Stone Active Carbon - average pore radius, nm - S ₁ relative limit of the validity of experimental point on the adsorption isotherm in the computations by means of regularization method - SAC Synthetic Active Carbon - S _BET specific surface area calculated by means of BET method, m²/g - S _mes mesopore surface area, m²/g - S _mic micropore surface area, m²/g - T absolute temperature, K - V _mes sorption capacity of mesopores, cm³/g - V _mic sorption capacity of micropores, cm³/g - V _p sorption capacity of pores, cm³/g - w/w weight in weight concentration - x half-width of slit-like micropore, nm - x ₁ maximum of half-width of micropore slit, nm - average half-width of slit-like micropore, nm - X _min-X _max integration limits of thex Greek Letters Greek Letters variance of average half-width of slit-like micropore, nm² - local relative filling of micropores - total relative filling of micropores