一类小缺陷码的链条件

利用射影几何方法在小缺陷码中,NMDS码是链条件码;给出k维NμMDS(0μk-2)码满足链条件的一个充要条件与一些易判断的充分条件.     

配送量不定的供应链协调

本文研究供应链管理中配送量不确定时，制造商和分销商之间的协调问题。通过建立惩罚和奖励机制模型来协调供应链各部分的运作，使得分散系统就如一个整体。同时分析供应链的利润分配问题，分别得出各个机制下分销商的最优决策。     

量子位Heisenberg XX开链中边界量子位之间的纠缠

Heisenberg 开链对研究量子态在自旋链上的传递有重要的意义.本文研究了五量子位Heisenberg XX 开链中边界量子位之间的纠缠，在该系统中引入了磁杂质和系统杂质且它们之间满足线性关系时，该系统可以精确求解，此时边界量子位之间存在纠缠.选择合适的杂质参数和磁场参数，该边界纠缠的最大值可达到0.5. 关键词： Heisenberg XX开链 边界纠缠 杂质     

40Ar+238U 实验介绍

主要介绍了利用兰州重离子加速器提供的270 MeV的40Ar离子束轰击238U靶，通过熔合蒸发反应进行试合成Z=110附近的新同位素的实验情况。分析了目前关于超重核研究的现状并描述了这次实验的目的、 可行性分析、 实验装置以及实验过程等。本次实验仍然用氦喷嘴技术对产物进行传输， 并用一套具有数对探测器组的转轮收集探测系统对产物进行收集和测量。 The state of the experiment to produce the new isotopes around Z=110 are presented in this paper. The emphasis is laid upon introducing the experiment purpose, the set up and the feasibility for producing this objective nuclide. In the experiment the new isotopes were produced by the complete fusion evaporation reaction of 238U with 270 MeV 40Ar at the Sector Focus Cyclotron (SFC) of Heavy Ion Research Facility in Lanzhou(HIRFL). The reaction products were also transported and collected by using the helium jet technique and rotating wheel apparatus.     

Intramolecular photocycloaddition of β-stilbazoles tethered by silyl chains

Intramolecular (2+2) photocycloaddition of β-stilbazoles tethered by silyl chains took place with high efficiency. Complexation with dicarboxylic acid or catechol further enhanced both the efficiency and stereoselectivity.     

8 mm回旋行波管和返波管的三折螺旋波纹波导色散分析

 三折螺旋波纹波导使TE11模和TE21模相互耦合，其色散曲线能够在宽频带内与电子回旋共振，因此需要对色散方程进行研究。提出了适合工程实用的行波模式和返波模式的色散方程，并对方程中的耦合系数进行了简化，误差在1%左右。利用CST软件的VBA语言对螺旋波纹波导进行建模和计算，根据模拟得到的传输特性曲线的特点，提出一种模拟方法，将模拟与理论计算得到的色散曲线作对比，误差在5%左右。     

Estimation in the continuous time mover‐stayer model with an application to bond ratings migration

The usual tool for modelling bond ratings migration is a discrete, time‐homogeneous Markov chain. Such model assumes that all bonds are homogeneous with respect to their movement behaviour among rating categories and that the movement behaviour does not change over time. However, among recognized sources of heterogeneity in ratings migration is age of a bond (time elapsed since issuance). It has been observed that young bonds have a lower propensity to change ratings, and thus to default, than more seasoned bonds. The aim of this paper is to introduce a continuous, time‐non‐homogeneous model for bond ratings migration, which also incorporates a simple form of population heterogeneity. The specific form of heterogeneity postulated by the proposed model appears to be suitable for modelling the effect of age of a bond on its propensity to change ratings. This model, called a mover–stayer model, is an extension of a Markov chain. This paper derives the maximum likelihood estimators for the parameters of a continuous time mover–stayer model based on a sample of independent continuously monitored histories of the process, and develops the likelihood ratio statistic for discriminating between the Markov chain and the mover–stayer model. The methods are illustrated using a sample of rating histories of young corporate issuers. For these issuers the default probabilities predicted by the Markov chain and mover–stayer models are different. In particular for 1–4 years old bonds the mover–stayer model estimates substantially lower default probabilities from rating C than a Markov chain. Copyright © 2004 John Wiley & Sons, Ltd.     

NCD系统的数学理论

无索赔折扣系统(No Claim Discount system,简记为NCD系统)是世界各国机动车辆险中广泛采用的一种经验费率厘定机制.本文尝试建立了NCD系统严谨的数学理论, 重点讨论了NCD系统的数学建模和稳态分析.此外,作为本文必要的数学前提,首先在第2节着重探讨了随机矩阵间的随机优序关系,并将所得结论运用至齐次不可约且遍历的马尔科夫链的研究中,这些内容也有其独立的数学上的兴趣.     

Dendrimers as scaffolds for multifunctional reversible addition–fragmentation chain transfer agents: Syntheses and polymerization

The synthesis and characterization of novel first‐ and second‐generation true dendritic reversible addition–fragmentation chain transfer (RAFT) agents carrying 6 or 12 pendant 3‐benzylsulfanylthiocarbonylsulfanylpropionic acid RAFT end groups with Z‐group architecture based on 1,1,1‐hydroxyphenyl ethane and trimethylolpropane cores are described in detail. The multifunctional dendritic RAFT agents have been used to prepare star polymers of poly(butyl acrylate) (PBA) and polystyrene (PS) of narrow polydispersities (1.4 < polydispersity index < 1.1 for PBA and 1.5 < polydispersity index < 1.3 for PS) via bulk free‐radical polymerization at 60 °C. The novel dendrimer‐based multifunctional RAFT agents effect an efficient living polymerization process, as evidenced by the linear evolution of the number‐average molecular weight (M_n) with the monomer–polymer conversion, yielding star polymers with molecular weights of up to M_n = 160,000 g mol^?1 for PBA (based on a linear PBA calibration) and up to M_n = 70,000 g mol^?1 for PS (based on a linear PS calibration). A structural change in the chemical nature of the dendritic core (i.e., 1,1,1‐hydroxyphenyl ethane vs trimethylolpropane) has no influence on the observed molecular weight distributions. The star‐shaped structure of the generated polymers has been confirmed through the cleavage of the pendant arms off the core of the star‐shaped polymeric materials. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5877–5890, 2004     

Synthesis and characterization of well‐defined diblock and triblock copolymers of poly(N‐isopropylacrylamide) and poly(ethylene oxide)

Well‐defined diblock and triblock copolymers composed of poly(N‐isopropylacrylamide) (PNIPAM) and poly(ethylene oxide) (PEO) were successfully synthesized through the reversible addition–fragmentation chain transfer polymerization of N‐isopropylacrylamide (NIPAM) with PEO capped with one or two dithiobenzoyl groups as a macrotransfer agent. ¹H NMR, Fourier transform infrared, and gel permeation chromatography instruments were used to characterize the block copolymers obtained. The results showed that the diblock and triblock copolymers had well‐defined structures and narrow molecular weight distributions (weight‐average molecular weight/number‐average molecular weight < 1.2), and the molecular weight of the PNIPAM block in the diblock and triblock copolymers could be controlled by the initial molar ratio of NIPAM to dithiobenzoate‐terminated PEO and the NIPAM conversion. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4873–4881, 2004