A novel tridentate nitrogen donor as ligand in copper catalyzed ATRP of methyl methacrylate

A tridentate ligand, BPIEP: 2,6‐bis[1‐(2,6‐diisopropyl phenylimino) ethyl] pyridine, having central pyridine unit and two peripheral imine coordination sites was effectively employed in controlled/“living” radical polymerization of MMA at 90°C in toluene as solvent, Cu^IBr as catalyst, and ethyl‐2‐bromoisobutyrate (EBiB) as initiator resulting in well‐defined polymers with polydispersities M_w/M_n ≤ 1.23. The rate of polymerization follows first‐order kinetics, k_app = 3.4 × 10^?5 s^?1, indicating the presence of low radical concentration ([P*] ≤ 10^?8) throughout the reaction. The polymerization rate attains a maximum at a ligand‐to‐metal ratio of 2:1 in toluene at 90°C. The solvent concentration (v/v, with respect to monomer) has a significant effect on the polymerization kinetics. The polymerization is faster in polar solvents like, diphenylether, and anisole, as compared to toluene. Increasing the monomer concentration in toluene resulted in a better control of polymerization. The molecular weights (M_n,SEC) increased linearly with conversion and were found to be higher than predicted molecular (M_n,Cal). However, the polydispersity remained narrow, i.e., ≤1.23. The initiator efficiency at lower monomer concentration approaches a value of 0.7 in 110 min as compared to 0.5 in 330 min at higher monomer concentration. The aging of the copper salt complexed with BPIEP had a beneficial effect and resulted in polymers with narrow polydispersitities and higher conversion. PMMA obtained at room temperature in toluene (33%, v/v) gave PDI of 1.22 (M_n = 8500) in 48 h whereas, at 50°C the PDI is 1.18 (M_n = 10,300), which is achieved in 23 h. The plot of lnk_app versus 1/T gave an apparent activation energy of polymerization as (ΔE^≠_app) 58.29 KJ/mol and enthalpy of equilibrium (ΔH⁰_eq) to 28.8 KJ/mol. Reverse ATRP of MMA was successfully performed using AIBN in bulk as well as solution. The controlled nature of the polymerization reaction was established through kinetic studies and chain extension experiments. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4996–5008, 2005     

Smoothing estimation of rate function for recurrent event data with informative censoring

This paper proposes kernel estimation of the occurrence rate function for recurrent event data with informative censoring. An informative censoring model is considered with assumptions made on the joint distribution of the recurrent event process and the censoring time without modeling the censoring distribution. Under the validity of the informative censoring model, we also show that an estimator based on the assumption of independent censoring becomes inappropriate and is generally asymptotically biased. To investigate the asymptotic properties of the proposed estimator, the explicit form of its asymptotic mean squared risk and the asymptotic normality are derived. Meanwhile, the empirical consistent smoothing estimator for the variance function of the estimator is suggested. The performance of the estimators are also studied through Monte Carlo simulations. An epidemiological example of intravenous drug user data is used to show the influence of informative censoring in the estimation of the occurrence rate functions for inpatient cares over time.     

Bounds to optimal burn‐in and optimal work size

Burn‐in is a widely used method to improve the quality of products or systems after they have been produced. In this paper, we consider the problem of determining the optimal burn‐in time and optimal work size maximizing the long‐run average amount of work saved per time unit in the computer applications. Assuming that the underlying lifetime distribution of the computer has an initially decreasing or/and eventually increasing failure rate function, an upper bound for the optimal burn‐in time is derived for each fixed work size and a uniform (with respect to the burn‐in time) upper bound for the optimal work size is also obtained. Furthermore, it is shown that a non‐trivial lower bound for the optimal burn‐in time can be derived if the underlying lifetime distribution has a large initial failure rate. Copyright © 2005 John Wiley & Sons, Ltd.     

Heterochain model for simultaneous long‐chain branching and crosslinking. III. Multicomponent polymerization

The matrix formula developed in the context of heterochain theory, M?_w = M?_wp + WF ( I ? M )^?1 S , was applied to describe the molecular weight development during free‐radical multicomponent polymerization. All of the required probabilistic parameters are expressed in terms of the kinetic‐rate constants and the various concentrations associated with them. In free‐radical polymerization, the number of heterochain types, N, needs to be extrapolated to infinity, and such extrapolation is conducted with only three different N values. This matrix formula can be used as a benchmark test if other approximate approaches can give reasonable estimates of the weight‐average molecular weights. The moment equations with the average pseudo‐kinetic‐rate constants for branching and crosslinking reactions may provide poor estimates when the copolymer composition drift during polymerization is very significant. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2801–2812, 2004     

修饰态布居的选择性激发对无反转激光的作用

以三能级V型系统为例研究修饰态布居的选择性激发对无反转激光增益的作用. 当非 相干驱动场的频谱宽度远小于驱动场产生的修饰态能级的间距时，非相干驱动场只将一个修 饰态的布居抽运至激发态. 借助原子的衰减通道，系统中形成单向布居转移通道，从而建立 修饰态布居的选择性激发. 利用修饰态布居的选择性激发，可以摆脱裸态共振无反转激光的 三个限制: (1) 不再要求辅助的低频驱动跃迁比高频激光跃迁具有更高的衰减速率；(2) 显 著降低非相干激发速率的阈值；(3) 无反转激光的线性增益不再反比于相干驱动场的强 关键词： 修饰态布居的选择性激发 无反转激光增益 原子衰减速率 非相干激发阈值速率     

光纤光栅选频掺Yb3+双包层光纤激光器

利用相位掩模法 ,在D形内包层掺Yb3 双包层光纤一端直接写制出Bragg光栅 ,用作双包层光纤激光器的输出腔镜 .试验得到了线宽为 0 196nm ,波长为 10 5 8 2nm ,最高输出功率为 5 70mW的稳定激光输出 ,解决了激光器中模式竞争造成的输出不稳定现象 .从速率方程出发 ,对激光器的输出功率与抽运功率、光栅反射率的关系以及最佳光纤长度进行了理论分析 ,结果与实验符合很好     

Kinetic Studies on the Reaction of Sodium Hexa-cyanoferrate(II) Complex with Peroxydisulfate Anion

Introduction In the previous studies on the oxidation reaction,peroxydisulfate was widely used as an oxidizingagent.1-5 One of the advantages of this oxidant lies in itsstability in a wide range of pH values. The reaction be-tween Fe(CN)5L3- (L=N-aromatic heterocyclic li-gands) and S2O8 2- has been proved to proceed throughan outer-sphere electron transfer mechanism.5 For a re-action [(Eq. (1)] to be under an outer-sphere mechanismthe steps involved are the formation of a reactant …     

Error estimates for Hermite interpolation on spheres

In this paper, we prove convergence rates for spherical spline Hermite interpolation on the sphere S^d−1 via an error estimate given in a technical report by Luo and Levesley. The functionals in the Hermite interpolation are either point evaluations of pseudodifferential operators or rotational differential operators, the desirable feature of these operators being that they map polynomials to polynomials. Convergence rates for certain derivatives are given in terms of maximum point separation.     

Environmental Effect of Macrocyclic Molecules on the Oxidation of Triethylamine by Ferricyanide Ion in Aqueous Solution

The effect of 18-crown-6 and kryptofix (2,2,1) on the oxidation of triethylamine byaqueous ferricyanide ion has been studied at pH 4, 7, and 9.The macrocycle retarded the normal oxidation process at all pH values,the effect depending on the macrocyclic ligand concentration Kryptofix (2,2,1) had a greater effect than 18-crown-6 at all pHvalues in this study. For 18-crown-6, retardation decreases in the order pH 9 > 4 > 7 while forkryptofix it follows the order pH 9 > 7 > 4.     

Two Convergence Problems for Monotone Sequences

Eight measures of rate of convergence of monotone sequences of real numbers have been proposed and discussed in a paper by Beyer, Ebanks, and Qualls (Acta Appl. Math. 20 (1990), 267–284). These rates arose in discussions of dynamical systems. In the comparisons of these rates, two problems remained. A complete answer is given to one of the problems and a partial answer is given to the other problem.