Heterochain model for simultaneous long‐chain branching and crosslinking. II. Application to free‐radical polymerization

The matrix formula developed in the context of hetrochain theory, M?_w = M?_wp + WF ( I ? M )^?1 S , was applied to describe the molecular weight development during free‐radical homopolymerization. All of the required probabilistic parameters are expressed in terms of the kinetic‐rate constants and various concentrations. In free‐radical polymerization, the primary chains are formed consecutively, and the number of heterochain types, N, is extrapolated to infinity. Practically, such extrapolation can be conducted on the basis of the calculated values for only three different N values with sufficient accuracy. This matrix formula is valid regardless of the chemical and reactor systems used, as long as the primary chain‐connection statistics is considered Markovian. The gel point can be determined simply by solving an equation det( I ? M ) = 0. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2791–2800, 2004     

Heterochain model for simultaneous long‐chain branching and crosslinking. I. Matrix formula for the weight‐average molecular weights

The hetrochain model was applied to develop a matrix formula describing the weight‐average molecular weights for a reaction system that involves simultaneous long‐chain branching and crosslinking. The heterochain model describes the molecular architecture formed through the primary chain connection that follows the Markovian statistics; therefore, this matrix formula is valid regardless of the chemical and reactor systems used, as long as the Markovian nature is preserved for the chain‐connection statistics. Application to free‐radical (co)polymerization systems is described in subsequent research. The gel point is simply described as a point at which the largest eigenvalue of the matrix M , which defines the chain‐connection statistics, reaches unity. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2780–2790, 2004     

Molecular Weight Development in Free‐Radical Polymerization with Polyfunctional Chain‐Transfer Agents, 1. Equal Reactivity Model

The analytic expression for the weight‐average molecular weight development in free‐radical polymerization that involves a polyfunctional chain‐transfer agent is proposed. Free‐radical polymerization is kinetically controlled; therefore, the probability of chain connection with a polyfunctional chain‐transfer agent as well as the primary chain‐length distribution changes during the course of polymerization. We consider the primary chains formed at different times as different types of chains, and the heterochain branching model is used to obtain the weight‐average chain length at a given conversion level in a matrix formula, described as P_w = W { D _w + ( I + T ) SP ( I – TSP )^–1 D_f }. Because the primary chains are formed consecutively, the number of chain types N is extrapolated to infinity, but such extrapolation can be conducted with the calculated values for only three different N values. The criterion for the onset of gelation is simply described as a point at which the largest eigenvalue of the product of matrixes, TSP reaches unity, i. e., det  ( I – TSP ) = 0. The present model can readily be extended for the star‐shaped polyfunctional initiators, and the relationships between the model parameters and kinetic rate expression for such reaction systems are also shown.     

Postgel properties in the statistical crosslinking of heterochains. II. Free‐radical crosslinking copolymerization

The heterochain crosslinking theory is applied to postgel behavior in the free‐radical crosslinking copolymerization of vinyl and divinyl monomers. In this context, the crosslinked polymer formation can be viewed as a system in which the primary chains formed at different times are combined in accordance with the statistical chain‐connection rule governed by the chemical reaction kinetics. Because the primary chains are formed consecutively, the number of chain types N must be extrapolated to infinity, N → ∞. Practically, such extrapolation can be conducted with the calculated values for only three different N values. The analytical expressions for the weight fraction and average molecular weights of the sol fraction are derived for the general primary chain length distribution function in free‐radical polymerization. Illustrative calculations show that the obtained results agree with those from the Monte Carlo method, and that the postgel properties in free‐radical crosslinking copolymerization systems could be significantly different from those in randomly crosslinked systems. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2342–2350, 2000     

Cyanoxyl‐mediated free‐radical polymerization of acrylic acid: Its scope and limitations

This work examines the scope and limitations of the cyanoxyl (^·OC?N)‐mediated free‐radical polymerization of acrylic acid (AA) with respect to the criteria of livingness. Cyanoxyl persistent radicals were generated in situ through the reaction between arenediazonium salts (X? C₆H₄N?N^⊕BF, where X is H, OCH₃, Cl, or NO₂) and sodium cyanate (NaOCN). This article thoroughly discusses the role played by such oxygen‐centered radicals in the polymerization process; it particularly focuses on the influence of the concentration and nature of the diazonium salt, the solvent, and the temperature on features such as the variations of ln([M]₀/[M]) versus time (where [M]₀ is the initial monomer concentration and [M] is the monomer concentration), the number‐average molar mass versus conversion, and the polydispersity versus conversion in cyanoxyl‐mediated free‐radical polymerizations of AA. Cyanoxyl‐terminated samples were used as macroinitiators for the polymerization of methyl methacrylate to generate poly(acrylic acid)‐b‐poly(methyl methacrylate) block copolymers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 519–533, 2005     

Photoinduced controlled/living free‐radical polymerization of 4‐methacryloyl‐1,2,2,6,6‐pentamethyl‐piperidenyl

The photoinduced solution polymerization of 4‐methacryloyl‐1,2,2,6,6‐pentamethyl‐piperidinyl (MPMP), used as a reactive hindered amine piperidinol derivative, was performed. The obtained MPMP homopolymer had a very narrow molecular weight distribution (1.06–1.39) according to gel permeation chromatography. The number‐average and weight‐average molecular weights increased linearly with the monomer conversion, this being characteristic of controlled/living free‐radical polymerizations. Electron spin resonance signals were detected in the MPMP homopolymer and in a polymer mixture solution, and they were assigned to nitroxide radicals, which were bound to the polymer chains and persisted at a level of 10^?9 mol/L during the polymerization. Instead of the addition of mediated nitroxide radicals such as 2,2,6,6‐tetramethyl‐piperidinyl‐1‐oxy (TEMPO), those radicals (>N? O ·) were formed in situ during the photopolymerization of MPMP, and so the reaction mechanism was understood as being similar to that of TEMPO‐mediated controlled/living free‐radical polymerization. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2659–2665, 2004     

Polymerization of methyl acrylate with triphenylbismuthonium 1,2,3,4‐tetraphenylcyclopentadienylide as a new radical initiator

Triphenylbismuthonium 1,2,3,4‐tetraphenylcyclopentadienylide in 1,4‐dioxan initiated radical polymerization of methyl acrylate to ～30% conversion without gelation because of autoacceleration. The polymer had a viscosity‐average molecular weight of 200,000. The kinetic expression was R_pα[I]^0.3[M]^1.16, that is, the system followed nonideal kinetics because of primary radical termination and degradative chain‐transfer reactions. The values of kk_t and the energy of activation were computed as 3.12 × 10^?5 Lmol^?1s^?1 and 28 kJ/mol, respectively. The ylide dissociated to form a phenyl radical, which brought about polymerization of methyl acrylate. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2060–2065, 2004     

Polar,functionalized diene‐based materials. V. Free‐radical polymerization of 2‐[(N‐benzyl‐n‐methylamino)methyl]‐1,3‐butadiene and copolymerization with styrene

2‐[(N‐Benzyl‐N‐methylamino)methyl]‐1,3‐butadiene (BMAMBD), the first asymmetric tertiary amino‐containing diene‐based monomer, was synthesized by sulfone chemistry and a nickel‐catalyzed Grignard coupling reaction in high purity and good yield. The bulk and solution free‐radical polymerizations of this monomer were studied. Traditional bulk free‐radical polymerization kinetics were observed, giving polymers with 〈M_n〉 values of 21 × 10³ to 48 × 10³ g/mol (where M_n is the number‐average molecular weight) and polydispersity indices near 1.5. In solution polymerization, polymers with higher molecular weights were obtained in cyclohexane than in tetrahydrofuran (THF) because of the higher chain transfer to the solvent. The chain‐transfer constants calculated for cyclohexane and THF were 1.97 × 10^?3 and 5.77 × 10^?3, respectively. To further tailor polymer properties, we also completed copolymerization studies with styrene. Kinetic studies showed that BMAMBD incorporated into the polymer chain at a faster rate than styrene. With the Mayo–Lewis equation, the monomer reactivity ratios of BMAMBD and styrene at 75 °C were determined to be 2.6 ± 0.3 and 0.28 ± 0.02, respectively. Altering the composition of BMAMBD in the copolymer from 17 to 93% caused the glass‐transition temperature of the resulting copolymer to decrease from 64 to ?7 °C. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3227–3238, 2001     

SET‐LRP of N,N‐dimethylacrylamide and of N‐isopropylacrylamide at 25 °C in protic and in dipolar aprotic solvents

The single‐electron transfer living radical polymerization (SET‐LRP) of water‐soluble monomers, N,N‐dimethylacrylamide (DMA) and N‐isopropylacrylamide (NIPAM), initiated with 2‐methylchloropropionate (MCP) in dipolar aprotic and protic solvents is reported. The radical polymerization of acrylamides is characterized by higher rate constants of propagation and bimolecular termination than acrylates. Therefore, the addition of CuCl₂ is required to mediate deactivation in the early stages of the reaction. Through the use of Cu(0)‐wire/Me₆‐TREN catalysis, conditions were optimized to minimize the amount of externally added CuCl₂ required to maintain a linear evolution of molecular weight and narrow molecular weight distribution. By using less CuCl₂ additive, the amount of soluble copper species that must ultimately be removed from the reaction mixture is reduced. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1752–1763, 2010     

Dithiocarbamate mediated controlled/living free radical polymerization of methyl acrylate under 60Co γ‐ray irradiation: Conjugation effect of N‐group

The free radical polymerizations of methyl acrylate have been studied under γ‐ray irradiation in the presence of the dithiocarbamates with different N‐groups. The results indicate that the conjugation structure of the N‐group of dithiocarbamate plays an important role in living free radical polymerization. The polymerizations reveal good living characteristics in the presence of dithiocarbamates (benzyl 1H‐imidazole‐1‐carbodithioate, benzyl 1H‐pyrrole‐1‐carbodithioate, benzyl 1H‐indole‐1‐carbodithioate, and benzyl 9H‐carbazole‐9‐carbodithioate) with N‐aryl group. In contrast, the polymerization with benzyl N,N‐diethyldithiocarbamate cannot be controlled, and the obtained polymer has a broad molecular weight distribution or even crosslink occurs. Moreover, polymerization rate is influenced by the conjugation structure of the N‐group of dithiocarbamate, and the aromatic polycyclic structure of the N‐group leads to slow polymerization. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5670–5677, 2004     

Synthesis of a series of SG1 2‐[N‐tert‐butyl‐N‐(1‐diethoxyphosphoryl‐2,2‐dimethylpropyl)aminoxyl] based alkoxyamines,SG1‐CH(Me)CO2R,and measurement of the homolysis rate constants of the C?ON bond

During nitroxide‐mediated polymerization, the polymerization time decreases with an increasing rate constant of the cleavage of the NO? C bond of dormant alkoxyamines. Thus, knowledge of the factors influencing this cleavage is of considerable interest. We have prepared a series of SG1 2‐[N‐tert‐butyl‐N‐(1‐diethoxyphosphoryl‐2,2‐dimethylpropyl)aminoxyl] based alkoxyamines [SG1‐CH(Me)CO₂R] with various R groups (alkyl or aryl) and measured the homolysis rate constants (k_d). k_d decreases with the bulkiness and increases with the polarity of the R group. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3504–3515, 2004     

Synthesis of polymers by template polymerization. I. Template polymerization of poly(methacrylic acid) with β‐cyclodextrin

A novel template monomer with multiple methacryloyl groups was synthesized with β‐cyclodextrin by the acetylation of primary hydroxyl groups and the esterification of secondary hydroxyl groups with methacrylic acid anhydride. The average number of methacryloyl groups in the monomer was 11. The radical polymerization of the monomer was carried out with the following initiators: α,α′‐azobisisobutylonitrile, H₂O₂? Fe²⁺ redox initiator, p‐xylyl‐N,N‐dimethyldithiocarbamate (XDC), and α‐bromo‐p‐xylyl‐N,N‐dimethyldithiocarbamate (BXDC). When the concentration of the monomer was less than 4.12 × 10^?3 M, polymerization was limited inside the molecule, and gelation of the system was hindered. For controlled radical photopolymerization with XDC and BXDC, the methacryloyl groups of the monomer were homogeneously polymerized, and poly(methacrylic acid) with a narrow molecular weight distribution was obtained by the hydrolysis of the polymerized products. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3539–3546, 2001     

Facile synthesis of AB2‐type miktoarm star polymers through the combination of atom transfer radical polymerization and ring‐opening polymerization

A novel miktofunctional initiator ( 1 ), 2‐hydroxyethyl 3‐[(2‐bromopropanoyl)oxy]‐2‐{[(2‐bromopropanoyl)oxy]methyl}‐2‐methyl‐propanoate, possessing one initiating site for ring‐opening polymerization (ROP) and two initiating sites for atom transfer radical polymerization (ATRP), was synthesized in a three‐step reaction sequence. This initiator was first used in the ROP of ?‐caprolactone, and this led to a corresponding polymer with secondary bromide end groups. The obtained poly(?‐caprolactone) (PCL) was then used as a macroinitiator for the ATRP of tert‐butyl acrylate or methyl methacrylate, and this resulted in AB₂‐type PCL–[poly(tert‐butyl acrylate)]₂ or PCL–[poly(methyl methacrylate)]₂ miktoarm star polymers with controlled molecular weights and low polydispersities (weight‐average molecular weight/number‐average molecular weight < 1.23) via the ROP–ATRP sequence. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2313–2320, 2004     

R‐RAFT approach for the polymerization of N‐isopropylacrylamide with a star poly(ε‐caprolactone) core

Reversible addition‐fragmentation chain transfer (RAFT) polymerization is a more robust and versatile approach than other living free radical polymerization methods, providing a reactive thiocarbonylthio end group. A series of well‐defined star diblock [poly(ε‐caprolactone)‐b‐poly(N‐isopropylacrylamide)]₄ (SPCLNIP) copolymers were synthesized by R‐RAFT polymerization of N‐isopropylacrylamide (NIPAAm) using [PCL‐DDAT]₄ (SPCL‐DDAT) as a star macro‐RAFT agent (DDAT: S‐1‐dodecyl‐S′‐(α, α′‐dimethyl‐α″‐acetic acid) trithiocarbonate). The R‐RAFT polymerization showed a controlled/“living” character, proceeding with pseudo‐first‐order kinetics. All these star polymers with different molecular weights exhibited narrow molecular weight distributions of less than 1.2. The effect of polymerization temperature and molecular weight of the star macro‐RAFT agent on the polymerization kinetics of NIPAAm monomers was also addressed. Hardly any radical–radical coupling by‐products were detected, while linear side products were kept to a minimum by careful control over polymerization conditions. The trithiocarbonate groups were transferred to polymer chain ends by R‐RAFT polymerization, providing potential possibility of further modification by thiocarbonylthio chemistry. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Controlled polymerization of N‐isopropylacrylamide with an activated methacrylic ester

A copolymer of N‐isopropylacrylamide with the N‐hydroxysuccinimide ester of methacrylic acid has found use in a variety of applications. Here we report our efforts to gain control over the molecular weight distribution of this copolymer with controlled radical polymerization methods, such as atom transfer radical polymerization, reversible addition–fragmentation transfer (RAFT), and nitroxide‐mediated polymerization. We have found that RAFT is capable of affording these copolymers with a polydispersity index of 1.1–1.2. Our results for all three polymerizations are reported. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6340–6345, 2004     

Precision synthesis of sustainable thermoplastic elastomers from lysine‐derived monomers

Novel renewable thermoplastic elastomers were synthesized by sequential polymerization of lysine‐ and itaconic acid‐derived monomers. Ring‐opening polymerization of lysine‐based O‐carboxyanhydride monomer using diethylene glycol as an initiator gave well‐defined α,ω‐dihydroxy functionalized lysine‐derived polyesters. The M _n of these polyesters increased with the monomer conversion while retaining relatively narrow molecular weight distributions. Based on the successful controlled polymerization and esterification of α,ω‐dihydroxy with 2‐bromoisobutyryl bromide, the resultant Br‐PL‐Br macroinitiator was used for the atom transfer radical polymerization of N‐phenylitaconimide (PhII). Three poly(N‐phenylitaconimide)‐b‐polyester‐b‐poly(N‐phenylitaconimide) triblock copolymers were prepared containing 12 ? 25 mol% PPhII, as determined by ¹H NMR spectroscopy. The properties of the obtained triblock copolymer are evaluated as high‐performance and renewable thermoplastic elastomer materials. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 349–355     

SET‐LRP of acrylonitrile catalyzed by tin powder

Sn(0)‐mediated single electron transfer‐living radical polymerization (SET‐LRP) of acrylonitrile (AN) with carbon tetrachloride (CCl₄) as initiator and hexamethylenetetramine (HMTA) as ligand in N, N‐dimethylformamide (DMF) was studied. The polymerization obeyed first order kinetic. The molecular weight of polyacrylonitrile (PAN) increased linearly with monomer conversion and PAN exhibited narrow molecular weight distributions. Increasing the content of Sn(0) resulted in an increase in the molecular weight and the molecular weight distribution. Effects of ligand and initiator were also investigated. The block copolymer PAN‐b‐polymethyl methacrylate with molecular weight at 126,130 and polydispersity at 1.36 was successfully obtained. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Single electron transfer‐living radical polymerization of methyl methacrylate in fluoroalcohol: Dual control over molecular weight and tacticity

The Cu(0)‐mediated single electron transfer‐living radical polymerization (SET‐LRP) of methyl methacrylate (MMA) using ethyl 2‐bromoisobutyrate (EBiB) as an initiator with Cu(0)/N,N,N′,N′′,N′′‐pentamethyldiethylenetriamine as a catalyst system in 1,1,1,3,3,3‐hexafluoro‐2‐propanol (HFIP) was studied. The polymerization showed some living features: the measured number‐average molecular weight (M_n,GPC) increased with monomer conversion and produced polymers with relatively low polydispersities. The increase of HFIP concentration improved the controllability over the polymerization with increased initiation efficiency and lowered polydispersity values. ¹H NMR, MALDI‐TOF‐MS spectra, and chain extension reaction confirmed that the resultant polymer was end‐capped by EBiB species, and the polymer can be reactivated for chain extension. In contrast, in the cases of dimethyl sulfoxide or N,N‐dimethylformamide as reaction solvent, the polymerizations were uncontrolled. The different effects of the solvents on the polymerization indicated that the mechanism of SET‐LRP differed from that of atom transfer radical polymerization. Moreover, HFIP also facilitated the polymerization with control over stereoregularity of the polymers. Higher concentration of HFIP and lower reaction temperature produced higher syndiotactic ratio. The syndiotactic ratio can be reached to about 0.77 at 1/1.5 (v/v) of MMA/HFIP at ?18 °C. In conclusion, using HFIP as SET‐LRP solvent, the dual control over the molecular weight and tacticity of PMMA was realized. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6316–6327, 2009     

Influence of the isomeric structures of butyl acrylate on its single‐electron transfer‐degenerative chain transfer living radical polymerization in water Catalyzed by Na2S2O4

The aim of this work is to the study the influence of the isomer structures of butyl acrylate monomer on the single‐electron transfer/degenerative chain transfer mediated living radical polymerization (SET‐DTLRP). The kinetic of isobutyl acrylate is determined for the first time by SET‐DTLRP in water catalyzed by sodium dithionite. The plots of number‐average molecular weight versus conversion and ln([M]₀/[M]) versus time are linear, demonstrating a controlled polymerization. The influence of the isomer t‐butyl, i‐butyl, and n‐butyl on the kinetics, properties, and stereochemistry of the reactions was assessed. To the best of our knowledge, there is no previous report dealing with the synthesis of PiBA by any LRP approach in aqueous medium. The results presented in this work suggest that the stability provided by the acrylate side group has an important influence in the polymerization process. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6542–6551, 2008     

“Living”/controlled free radical polymerization of MMA in the presence of cobalt(II) 2‐ethylhexanoate: A switch from RAFT to ATRP mechanism

A metal complex, cobalt(II) 2‐ethylhexanoate (CEH), was added to the system of thermal‐initiated reversible addition‐fragmentation chain transfer (RAFT) polymerization of methyl methacrylate (MMA) with 2‐cyanoprop‐2‐yl 1‐dithionaphthalate (CPDN) as the RAFT agent at 115 °C. The polymerization rate was remarkably enhanced in the presence of CEH in comparison with that in the absence of CEH, and the increase of the CPDN concentration also accelerated the rate of polymerization. The polymerization in the concurrence of CPDN and CEH demonstrated the characters of “living”/controlled free radical polymerization: the number‐average molecular weights (M_n) increasing linearly with monomer conversion, narrow molecular weight distributions (M_w/M_n) and obtained PMMA end‐capped with the CPDN moieties. Meanwhile, CEH can also accelerate the rate of RAFT polymerization of MMA using the PMMA as macro‐RAFT agent instead of CPDN. Similar polymerization profiles were obtained when copper (I) bromide (CuBr)/N,N,N′,N′′,N′′‐pentamethyldiethylenetriamine was used instead of CEH. Extensive experiments in the presence of butyl methacrylate, bis(cyclopentadienyl) cobalt(II) and cumyl dithionaphthalenoate were also conducted; similar results as those of MMA/CPDN/CEH system were obtained. A transition of the polymerization mechanism, from RAFT process without CEH addition to atom transfer radical polymerization in the presence of CEH, was possibly responsible for polymerization profiles. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5722–5730, 2007