Boundary value problems for first order impulsive delay differential equations with a parameter

In this paper, by means of the method of upper and lower solutions and monotone iterative technique, the existence of maximal and minimal solutions of the boundary value problems for first order impulsive delay differential equations is established.     

斐索型光学合成孔径系统近轴成像条件研究

从几何光学理论出发，详细推导了斐索型光学合成孔径成像系统的近轴非相干成像条件，即子望远系统的角放大率等于系统的线性缩放因子。对于焦平面上的像点而言，合成孔径成像系统可等效为一个带有特殊形状孔径光阑的望远系统，这要求该孔径光栏的开口形状和位置分布与合成孔径成像系统各子系统孔径大小和位置分布相一致。我们由此得到了斐索型合成孔径成像系统的主要约束条件。     

关于非平行板电容器电容计算的讨论

用串联方法计算非平行板电容器的电容，简便地得到与其他方法相同的结果。     

Prefiltration technique via aggregation for constructing low‐density high‐quality factorized sparse approximate inverse preconditionings

This paper considers a new approach to a priori sparsification of the sparsity pattern of the factorized approximate inverses (FSAI) preconditioner using the so‐called vector aggregation technique. The suggested approach consists in construction of the FSAI preconditioner to the aggregated matrix with a prescribed sparsity pattern. Then small entries of the computed ‘aggregated’ FSAI preconditioning matrix are dropped, and the resulting pointwise sparsity pattern is used to construct the low‐density block sparsity pattern of the FSAI preconditioning matrix to the original matrix. This approach allows to minimize (sometimes significantly) the construction costs of low‐density high‐quality FSAI preconditioners. Numerical results with sample matrices from structural mechanics and thin shell problems are presented. Copyright © 2002 John Wiley & Sons, Ltd.     

大焦深成像系统仿真实验研究

如何增大非相干光学成像系统的焦深是应用光学研究领域的热点问题.本文对采用高次非球面光学掩模板与图像处理相结合增大成像光学系统焦深的新方法进行了深入分析,建立了大焦深成像系统仿真实验模型,并进行了大焦深成像系统仿真实验.实验结果证明了该方法在维持原相对孔径的同时使光学系统在较大的离焦范围内有好的成像质量.实际应用中还要综合考虑模板参量、信噪比等关键因素.     

一种新的超分辨记录点的读出技术

提出一种新的超分辨记录点的读出技术—超分辨反射膜技术，详细分析了其原理。用该技术，以Sb为超分辨反射膜，SiN为介电层，在激光波长为632．8nm和光学头的数值也径为0．40的读出光学系统中实现了直径为380nm的超分辨记录点的读出。同时研究了Sb薄膜厚度对读出信噪比的影响规律，发现最佳的Sb薄膜厚度为28～30nm，所得的信噪比为38～40dB。     

Chip-calorimeter for small samples

A method for measuring heat capacities of small samples using a chip-calorimeter and a heat pulse technique is described. The theoretical background to calculate the heat transport properties and the heat capacity of the sample from the pulse response function is given. Problems and potentials of the method are discussed. An example is given.     

Relation between the Hydrodynamic and Elastic Parameters in Surface Wave Diffraction on a Floating Plate

The problem of surface wave diffraction on a floating elastic plate is considered. The relation between the parameters of the elastic vibrations of the plate and the transmitted and reflected wave amplitudes is investigated. It is shown that the maximum amplitudes of the plate stresses and deflections depend nonmonotonically on the incident wave frequency and are reached simultaneously with the maxima of both the transmission coefficient and the length of the wave penetrating into the plate. This makes it possible to use the transmission coefficient as a parameter for investigating the maximum and minimum amplitudes of the hydroelastic vibrations of the plate. As an example, this criterion is used to minimize the vibrations of a plate whose leading edge is elastically connected to the bottom.     

产生特殊聚焦图形的二元光学元件

通过面积编码将伽博（Gabor)波带片的透过率函数的余弦分布等效为二元分布，研制了能产生各种特殊聚焦图形的二元光学元件。根据透镜聚焦的物理原理制作的二元振幅型波带片可以方便地产生多种聚焦线，给出了相应的实验结果，并讨论了改善聚焦效果的优化条件。     

电子直线加速器磁控管频率稳定的自适应线性神经元方法

 电子直线加速器电子束能量的稳定与否取决于功率源工作频率的稳定性,磁控管在短时间内的散谱和轻微跳谱造成稳频系统的控制精度下降,最后电子束的扫描均匀度下降。引入自适应线性神经元方法(ADALINE)和噪声对消技术以消除对工作频率长期稳定性的影响,从而保证了电子束的扫描均匀度。