担载液相催化剂的研究——Ⅳ.催化剂的原位红外光谱表征

本文利用原位红外光谱方法对铑基担载液相催化剂(SLPC)在接近于实际反应条件下进行了表征。结果表明,新鲜催化剂上,铑膦络合物主要以二聚物的形式存在,如Rh_2(CO)_2(PPh_3)_4而在合成气或反应气氛中,催化剂铑膦络合物以单核络合物HRh(CO)_2(PPh_3)_2的形式存在。文中还对SLPC在CO,H_2,C_2-H_4,空气和HCl中处理时铑络合物种的变化进行了原位观察。实验结果表明,SLPC上活性铑络合物与对应的均相过程完全一致,进一步证实了SLPC催化在微观上就是一个均相催化过程。     

Synthesis and structural, spectroscopic and magnetic studies of two new polymorphs of Mn(SeO3)·H2O

Two new manganese(II) selenite polymorphs with formula Mn(SeO₃)·H₂O have been synthesized by slow evaporation from an aqueous solution. The crystal structure of both compounds (1) and (2) have been solved from X-ray diffraction data. The structure of (1) was determined from single-crystal X-ray diffraction techniques. The compound crystallizes in the Ama2 space group, with a=5.817(1), b=13.449(3), and Z=4. The structure of (2) has been solved from X-ray powder diffraction data. This phase crystallizes in the P2₁/n space group with unit-cell parameters of a=4.921(3), b=13.121(7), , β=90.03(2)° and Z=4. Both polymorphs exhibit a layered structure formed by isolated sheets of MnO₆ octahedra and (SeO₃)²⁻ trigonal pyramids in the (010) plane. These layers, which contain one manganese and selenium atom crystallographically independent, are formed by octahedra linked between them through the selenite oxoanions. The difference of both compounds consists in the stacking of the layers along the b-axis. The IR spectra show the characteristic bands of the selenite anion. Studies of luminescence performed at 6 K and diffuse reflectance spectroscopy have been carried out for both phases. The Dq and Racah (B and C) parameters, from luminescence and diffuse reflectance spectroscopy, are Dq=705, B=750, for (1) and Dq=720, B=745, for (2). The ESR spectra of both compounds are isotropic with g-values of 1.99(1). Magnetic measurements indicate the presence of antiferromagnetic couplings in both phases. The J-exchange parameters have been estimated by fitting the experimental magnetic data to a model for square-planar lattice. The values obtained are J/k=-0.83, −0.91 K and J^′/k=-0.97, −1.20 K, for polymorphs (1) and (2), respectively.     

具有三维交叉孔道的新型亚磷酸锌的合成与结构

本文报道了一种新型三维亚磷酸锌[HO(CH₂)₂NH₃]₂•[Zn₃(HPO₃)₄]的合成和晶体结构。在它的结构中，ZnO₄和HPO₃严格按照顶点连接的方式交替相连。骨架结构存在两个沿着不同方向无限延伸的由ZnO₄和HPO₃组成的四元环链，在[0 1 0]、[0 4 15]和[0 -4 15]三个方向形成了三个交叉8元环孔道，有机胺阳离子起着平衡电荷和稳定骨架的结构。它的晶体数据为：[HO(CH₂)₂NH₃]₂•[Zn₃(HPO₃)₄],M=640.21, 正交晶系, Fdd2空间群, a=2.8528, b=0.8426, c=1.6159nm, Z=8, V=3.884nm³, R₁=0.0219, wR₂=0.0544。     

Cationic complexes of Eu(III) and Sr(II) with diphosphine dioxides in organic extracts

IR spectroscopy was used to study the structure and composition of Eu(III) and Sr(II) complexes formed by cation-exchange extraction of these metals from their aqueous nitrate solutions with dichlorethane solutions of mixtures of chlorinated cobalt(III) dicarbollide (CCD) as a superacid with diphenyldiphosphine dioxides containing a methyl (Me-DPDO), ethyl (Et-DPDO), or polyoxyethylene bridge between two phosphorus atoms of phosphine oxide groups. At molar ratios DPDO/CCD ≤ 1, [Eu(H₂O)_nL₄]³⁺ complexes are formed in organic phases, whereas with an excess of DPDO relative to CCD, Eu(NO₃)L ₄ ²⁺ complexes are formed, where L = Me-or Et-DPDO. Polyoxyethylenediphosphine dioxide forms anhydrous complexes of composition Eu:L = 1:1 and 1:2 with Eu(III) and outer-spheric complexes of composition Sr:L = 1:1 and 1:2 with Sr(II), where the organic ligand molecules envelop the hydrated Sr(H₂O) _n ²⁺ cation. The peculiarities of extraction of the complexes are explained based on data about their composition and structure.     

Synthese und Kristallstrukturen der Phosphanimin-Komplexe MCl2(Me3SiNPMe3)2 mit M = Zn und Co,und CoCl2(HNPMe3)2

Syntheses and Crystal Structures of the Phosphaneimine Complexes MCl₂(Me₃SiNPMe₃)₂ with M = Zn and Co, and CoCl₂(HNPMe₃)₂ The molecular complexes MCl₂(Me₃SiNPMe₃)₂ (M = Zn, Co) have been prepared by the reaction of the dichlorides of zinc and cobalt with Me₃SiNPMe₃ in CH₃CN and CH₂Cl₂, respectively, whereas the complex CoCl₂(HNPMe₃)₂ has been prepared by the reaction of CoCl₂ with NaF in boiling acetonitrile in the presence of Me₃SiNPMe₃. All complexes were characterized by IR spectroscopy and by crystal structure determinations. The complexes MCl₂(Me₃SiNPMe₃)₂ crystallize isotypically. ZnCl₂(Me₃SiNPMe₃)₂: Space group P2₁2₁2₁, Z = 4, 2677 observed unique reflections, R = 0.024. Lattice dimensions at ?70°C: a = 1243.6; b = 1319.0; c = 1464.7 pm. CoCl₂(Me₃SiNPMe₃)₂: Space group P2₁2₁2₁, Z = 4, 3963 observed unique reflections, R = 0,071. Lattice dimensions at ?80°C: a = 1236.3; b = 1317.4; c = 1457.6 pm. CoCl₂(HNPMe₃)₂ · CH₂Cl₂: Space group Pbca, Z = 8, 1354 observed unique reflections, R = 0.055. Lattice dimensions at ?80°C: a = 1247.3; b = 998.4; c = 2882.4 pm. All complexes have monomeric molecular structures, in which the metal atoms are coordinated in a distorted tetrahedral fashion by the two chlorine atoms and by the nitrogen atoms of the phosphaneimine molecules.     

Spectral and Thermal Studies of Rare Earth Element 3-methylglutarates

Conditions for the formation of rare earth element (Y, La–Lu) 3-methylglutarates were studied and their quantitative composition and solubilities in water at 293 K were determined (10^–2 mol dm^–3). The IR spectra of the prepared complexes with general formula Ln₂(C₆H₈O₄)₃ nH₂O (n=3–8) were recorded and their thermal decomposition in the air were investigated. During heating the hydrated 3-methylglutarates are dehydrated in one step and next anhydrous complexes decompose to oxides Ln₂O₃ with intermediate formation Ln₂O₂CO₃ (Y, La, Nd–Gd) or directly to the oxides, Ln₂O₃, CeO₂, Pr₆O₁₁ and Tb₄O₇ (Ce, Pr, Tb–Lu). This revised version was published online in August 2006 with corrections to the Cover Date.     

Spectral regions selection to improve prediction ability of PLS models by changeable size moving window partial least squares and searching combination moving window partial least squares

Changeable size moving window partial least squares (CSMWPLS) and searching combination moving window partial least squares (SCMWPLS) are proposed to search for an optimized spectral interval and an optimized combination of spectral regions from informative regions obtained by a previously proposed spectral interval selection method, moving window partial least squares (MWPLSR) [Anal. Chem. 74 (2002) 3555]. The utilization of informative regions aims to construct better PLS models than those based on the whole spectral points. The purpose of CSMWPLS and SCMWPLS is to optimize the informative regions and their combination to further improve the prediction ability of the PLS models. The results of their application to an open-path (OP)/FT-IR spectra data set show that the proposed methods, especially SCMWPLS can find out an optimized combination, with which one can improve, often significantly, the performance of the corresponding PLS model, in terms of low prediction error, root mean square error of prediction (RMSEP) with the reasonable latent variable (LVs) number, comparing with the results obtained using whole spectra or direct combination of informative regions for a compound. Regions consisting of the combinations obtained can easily be explained by the existence of IR absorption bands in those spectral regions.     

The matrix-isolation IR spectrum of the o-quinonoid intermediate in the photolysis of 2-nitrobenzyl methyl ether

Photolysis of 2-nitrobenzyl methyl ether in Ar and N₂ matrices at 12 K generated an intermediate with λ_max at 430 nm, and which was itself photolabile at 430–460 nm. Matrix IR spectra, as well as the UV-visible absorption, were obtained for this species. An analogous intermediate had previously been observed in flash-photolysis studies of 2-nitrobenzyl 4-cyanophenyl ether, and had been assigned an o-quinonoid structure on the basis of its kinetic behaviour and the position of its UV-visible absorption. In the matrix studies with 2-nitrobenzyl methyl ether, the IR spectra confirmed the o-quinonoid structure.     

Comparative study of catalytic activity of Pd loaded hydroxyapatite and fluoroapatite in butan-2-ol conversion and methane oxidation

Palladium loaded calcium-hydroxyapatite, Pd(z)/CaHAp, and calcium-fluoroapatite, Pd(z)/CaFAp, were synthesised and characterised by TEM, XRD, IR and UV–vis–NIR spectroscopies. Introduction of palladium does not change the structure of CaHAp and CaFAp. The average size of PdO particles was found to be around 4–5 nm on Pd(1)/CaHAp but larger (6–7 nm) on Pd(1)/CaFap. The acid–base properties of the supports and of the catalysts were studied using butan-2-ol conversion. On CaHAp and CaFAp, the butenes yield (dehydration reaction) is very low either in the absence or in the presence of oxygen. The methyl ethyl ketone yield (dehydrogenation reaction) is significant only in the presence of oxygen and higher over CaFAp. Conversely, the performances of Pd(z)/CaHAp are better than those of Pd(z)/CaFAp below 180 °C. Above 180 °C, buta-2-ol combustion is favoured on Pd/CaHAp but not on Pd/CaFAp.

In methane oxidation, Pd(z)/CaHAp showed also a much larger activity than Pd(z)/CaFAp. On 2 wt% Pd loaded CaHAp, the methane oxidation reaches a conversion of almost 100% at 350 °C, which is comparable with the performance of conventional Pd/Al₂O₃ catalysts. The reducibility of PdO under methane–oxygen mixtures is lower on Pd(z)/CaHAp. For both reactions, the lower activity of Pd(z)/CaFAp is related to its higher acidity, resulting from the substitution of OH⁻ by F⁻, and to the larger PdO particle size.     

Phosphanimin- und Phosphaniminato-Komplexe von Eisen. Die Kristallstrukturen von [FeCl3(Me3SiNPEt3)], [FeCl2(Me3SiNPEt3)]2, [FeCl2(NPEt3)]2 und [Fe(O2C?CH3)2(NPEt3)]2

Phosphanimine and Phosphoraneiminato Complexes of Iron. The Crystal Structures of [FeCl₃(Me₃SiNPEt₃)], [FeCl₂(Me₃SiNPEt₃)]₂, [FeCl₂(NPEt₃)]₂, and [Fe(O₂C? CH₃)₂(NPEt₃)]₂ The phosphanimine complexes [FeCl₃(Me₃SiNPEt₃)] (red-orange) and [FeCl₂(Me₃SiNPEt₃)]₂ (colourless) have been prepared by reactions of Me₃SiNPEt₃ with FeCl₃ and FeCl₂, respectively, in CH₂Cl₂ suspensions. Thermal decomposition of these donor-acceptor complexes in boiling toluene leads to the phosphoraneiminato complex [FeCl₂(NPEt₃)]₂ (black), whereas [Fe(O₂C? CH₃)₂(NPEt₃)]₂ (brown) is formed from iron(II) acetate and Me₃SiNPEt₃ in boiling acetonitrile. The complexes are characterized by IR spectroscopy and by crystal structure determinations. [FeCl₃(Me₃SiNPEt₃)] (1) : Space group P2₁/c, Z = 8, structure determination with 4 673 unique reflections, R = 0.033. Lattice dimensions at ?15°C: a = 1 607.8, b = 1 602.0, c = 1 417.2 pm, β = 106.56°. 1 forms monomeric molecules with tetrahedrally coordinated iron atoms. Bond lengths in average: Fe? N = 196.9 pm, Fe? Cl = 219.7 pm. [FeCl₂(Me₃SiNPEt₃)]₂ (2) : Space group P2₁/c, Z = 4, structure determination with 4 992 unique reflections, R = 0.048. Lattice dimensions at 20°C: a = 1 457.9, b = 1 685.4, c = 1 507.3 pm, β = 116.74°. 2 forms dimeric molecules, which are associated by chloro bridges. The iron atoms are tetrahedrally coordinated with trans positions of the phosphanimine ligands. Both lengths in average: Fe? N = 202.2 pm, Fe? Cl_terminal = 224.7 pm, Fe? Cl bridge = 241.0 pm. [FeCl₂(NPEt₃)]2 (3): Space group P2₁/n, Z = 2, structure determination with 2763 unique reflections, R = 0.039. Lattice dimensions at ?70°C: a = 799.1, b = 1009.0, c = 1441.9 pm, β = 93.45°. 3 forms centrosymmetric dimeric molecules, in which the tetrahedrally coordinated iron atoms are associated by the nitrogen atoms of the phosphoraneiminato ligands. Bond lengths in average: Fe? N = 191.4 pm, Fe? Cl = 222.7 pm. [Fe(O₂C? CH₃)₂(NPEt₃]2 (4): Space group P2₁/n, Z = 2, structure determination with 3005 observed unique reflections, R = 0.034. Lattice dimensions at -65°C: a = 886.4, b = 1444.6 pm, β = 90.60°. 4 forms centrosymmetric dimeric molecules, in which the octahedrally coordinated iron atoms are associated by the nitrogen atoms of the phosphoraneiminato ligands with bond lengths Fe? N of 191.9 and 195.0 pm. The acetate groups are coordinated in a chelating fashion.