溶剂萃取法制备Co(PO_3)_2超细微粉

本文用溶剂萃取法成功地制备了偏磷酸钴超细微粉并通过ＸＲＤ，ＩＲ，ＴＧ，ＤＴＡ，ＴＥＭ等实验对超细微粉的组成、结构进行了表征。     

Analysis of selected pesticides and alkylphenols in human cord blood by gas chromatograph-mass spectrometer

A total of seven pesticides and eight alkylphenols were monitored using this method for the determination of their trace levels in human cord blood. The pesticides are lindane, diazinon, α-endosulfan, β-endosulfan, endosulfan sulfate, chlorpyrifos and endrin; while the alkylphenols are 4-n-butylphenol, 4-n-pentylphenol, 4-n-hexylphenol, 4-t-octylphenol, 4-n-heptylphenol, nonylphenol, 4-n-octylphenol and bisphenol A. The pesticides and alkylphenols in the cord blood samples were extracted with solid phase extraction IST C18 cartridges and analyzed by selected ion monitoring mode using quadrapole detector in Shimadzu QP-5000 gas chromatograph-mass spectrometer. Trace levels of pesticide and alkylphenols in the range of non-detectable to 15.17 ng ml⁻¹, were detected in the human cord blood samples. This technique of monitoring the levels of endocrine-disruptors in blood samples is consistent, reliable and cost effective while reducing wastage of time and solvents.     

Influence of Nucleation Agents Concentration on Crystallization Structure and Properties of Glass-ceramics

Deep color glass-ceramics is prepared by using gold tailings as the main raw material, and Cr2O3 is added as nucleation agent. Influence of different Cr2O3 additions on crystallization structure and properties of CaO-MgO-Al2O3-SiO2 glass-ceramics has been discussed so as to select optimum additions. DTA is employed to determine optimum crystallization and nucleation temperatures; XRD and SEM are used to characterize microstructure of each sample; and performance indexes, such as water absorption, bulk density, flexural strength and so on, are also determined. Experimental results show that when 3wt% Cr2O3 is introduced, fine glass-ceramics with diopside as the main crystal and Ca-Fe diopside as the second-crystal is obtained, and its corresponding performance indexes are as follows: water absorption 0.12%, bulk density 2.56 g/cm3, and flexural strength 70.01 Mpa.     

Adsorption of large macromolecules on fine colloidal particles

A simple model of adsorption of large macromolecules on ultra-fine colloidal particles is presented. The basic assumption of the model is that the number of particles attached to a single molecule is a random quantity. Both the reversible and irreversible polymerparticle binding is considered. Also, effects of the non-ideal mixing of polymer solution with suspension and of the polymer/particle size ratio on the shape of the adsorption isotherm are examined. The predictions of the model are confronted with experimental results of the study on the adsorption of very high molecular weight polyacrylamide on fine AgI colloidal particles.     

Degradation-fragmentation of marine plastic waste and their environmental implications: A critical review

This review critically evaluates the plastic accumulation challenges and their environmental (primarily) and human (secondarily) impacts. It also emphasizes on their degradation and fragmentation phenomena under marine conditions. In addition, it takes into account the leachability of the various chemical substances (additives) embedded in plastic products to improve their polymeric properties and extend their life. Regardless of their effectiveness in enhancing the polymeric function of plastic products, these additives can potentially contaminate air, soil, food, and water. Several findings have shown that, regardless of their types and sizes, plastics can be degraded and/or fragmented under marine conditions. Therefore, the estimation of fragmentation and degradation rates via a reliable developed model is required to better understand the marine environmental status. The main parameter, which is responsible for initiating the fragmentation of plastics, is sunlight/UV radiation. Yet, UV- radiation alone is not enough to fragment some plastic polymer types under marine conditions, additional factors are needed such as mechanical abrasion. It should be also mentioned that most current studies on plastic degradation and fragmentation centered on the primary stages of degradation. Thus, further studies are needed to better understand these phenomena and to identify their fate and environmental effects.     

超临界流体技术在制备药物输送系统中的应用

超临界流体技术以其特有的优点成为引人注目的制备药物细微粒子及控制释放的药物输送系统的方法。本文介绍了超临界流体沉淀技术的概念、进展及相关的应用。     

Redox troponization of (η5-cyclopentadienyl)(η4-4-menthyl-4-exo-trichloromethylcyclohexa-2,5-dien-1-one)rhodium as a novel approach to the synthesis of metal-coordinated nonbenzenoid aromatics of the tropone seriesas a novel approach to the synthesis of metal-coordinated nonbenzenoid aromatics of the tropone series

The possibility of redox troponization of a gem-polyhalomethylated semiquinoid system, π-coordinated to a metal atom, was shown in relation to the reaction of (η⁵-cyclopentadienyl)(η⁴-4-menthyl-4-exo-trichloromethylcyclohexa-2,5-dien-1-one)rhodium with Pd(PPh₃)₄. The reaction occurs with retention of the metal coordination affording a sevenmembered organometallic derivative of the nonbenzoid aromatic series, namely, (η⁵-cyclopentadienyl)(η⁴-4-chloro-5-menthylcyclohepta-2,4,6-trien-1-one)rhodium, whose structure was established by means of elemental analysis, NMR, and mass-spectral data. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1255–1256, June, 1998.     

Potential energy surfaces and nonadiabatic transitions in the asymptotic regions of ICN photodissociation to study the interference effects in the F1 and F2 spin-rotation levels of the CN products

One of the most spectacular yet unsolved problems for the ICN -band photodissociation is the non-statistical spin-rotation F₁ = N + 1/2 and F₂ = N − 1/2 populations for each rotation level N of the CN fragment. The F₁/F₂ population difference function f(N) exhibits strong N and λ dependences with an oscillatory behavior. Such details were found to critically depend on the number of open-channel product states, namely, whether both I (²P_3/2) and I (²P_1/2) are energetically available or not as the dissociation partner. First, in the asymptotic region, the exchange and dipole-quadrupole inter-fragment interactions were studied in detail. Then, as the diabatic basis, we took the appropriate symmetry adapted products of the electronic and rotational wavefunctions for the F₁ and F₂ levels at the dissociation limits. We found that the adiabatic Hamiltonian exhibits Rosen–Zener–Demkov type nonadiabatic transitions reflecting the switch between the exchange interaction and the small but finite spin-rotation interaction within CN at the asymptotic region. This non-crossing type nonadiabatic transition occurs with the probability 1/2, that is, at the diabatic limit through a sudden switch of the quantization axis for CN spin S from the dissociation axis to the CN rotation axis N . We have derived semiclassical formulae for f(N) and the orientation parameters with a two-state model including the 3A′ and 4A′ electronic states, and with a four-state model including the 3A′ through 6A′ electronic states. These two kinds of interfering models explain general features of the F₁ and F₂ level populations observed by Zare's group and Hall's group, respectively. © 2018 Wiley Periodicals, Inc.     

Capillary electrophoresis determinative and GC-MS confirmatory method for water-soluble organic acids in airborne particulate matter and vehicle emission

Urban fine airborne particulate matter (PM2.5) and vehicle emission samples were studied for water-soluble low-molecular-weight carboxylic acids using CE with indirect UV detection. Further identification of these acids was achieved using GC-MS as their butyl esters (after derivatization with BF3/butanol). Several dicarboxylic acids in the range C2-C10 including straight-chain, branched-chain, cis- and trans-unsaturated, and aromatic acids were confirmed by GC-MS. In addition, aromatic acids such as benzoate, phthalate, terephthalate, isophthalate, and 4-methylphtalate were present in such samples, but some of these were not well resolved by the used CE method. Oxocarboxylic acids (Cn(w) with n > 4) were also identified by GC-MS but not determined by CE due to lack of standards. The rapidity and simplicity of the CE method were clearly demonstrated, and the method was observed to be advantageous for routine monitoring of water-soluble organic acids in airborne PM2.5 and vehicle emission at low microg/L levels.     

Potential Applications of Cucurbit[n]urils and Their Derivatives in the Capture of Hazardous Chemicals

Cucurbit[n]urils (Q[n]s) are a relatively young family of macrocycles, consisting of glycoluril units bridged by methylene groups, and their unique structures have attracted extensive attention from chemists in recent decades. Due to the presence of a rigid hydrophobic inner cavity and two polar outer portals lined with carbonyl groups, Q[n]s not only encapsulate guest species into the cavity, but also coordinate with metal ions/clusters. Considerable achievements have been obtained in the fields of Q[n]s-based host–guest chemistry, coordination chemistry, as well as the combination of host–guest and coordination chemistry. Furthermore, the outer surface of Q[n]s has been demonstrated to be capable of interacting with definite species to generate supramolecular architectures in recent years. With more in-depth research into Q[n]s, their application studies have also emerged as a hot topic. This Minireview focuses on recent advances in the potential applications of solid-state materials based on Q[n]s and their derivatives for the capture and adsorption of hazardous chemicals from a solution or a gas mixture.