重金属铊在环境介质中的分布及其迁移行为

铊是剧毒重金属元素,它在自然界中是典型的稀有分散金属。环境介质中铊的自然本底值较低,但随着铊矿床的开发和铊资源的广泛应用,岩矿石中的铊在自然力或人为作用下向环境介质中迁移。综述了铊在岩（矿）石、土壤、水体、动植物和人体中的分布,以及在上述环境介质及大气中的迁移行为。研究表明,人类活动是导致环境介质中铊含量增加的主要原因。铊在环境介质中的迁移是反复循环的复杂过程,通过风化、溶解、淋滤、吸收、沉降、固结等方式在环境介质中循环往复,从而危害环境生态和人体健康。铊污染应引起人们的普遍重视。     

光伏太阳能电池生产过程中的污染问题

日益壮大的光伏产业正在为人类发展作出积极的贡献.采用光伏发电来代替传统的发电技术,将会减少89%的空气污染.然而,在这个倡导绿色环境的时代,光伏器件生产引起的环境、健康和安全（EHS）问题也日益引起社会各界的广泛关注.认清光伏产品在生产过程中污染的真相对维持光伏产业的可持续发展有着相当重要的意义.本文综述了常见太阳能电池的EHS问题,并提出了可以减少污染的有效途径;采用生命周期评估（LCA）方法进一步比较了各种太阳能电池生产过程中污染物的排放量数据.     

Cleaning requirements for silica‐coated sensors used in optical waveguide lightmode spectroscopy

Optical waveguide lightmode spectroscopy (OWLS), based on the incoupling of laser light into a waveguide sensor by an optical grating, allows for the in situ measurement of protein adsorption. Few reports have described cleaning methods for the surfaces of such sensors, and in this investigation, we compare common methods for cleaning of silica surfaces in relation to their effectiveness for cleaning silica‐coated waveguide sensors used in OWLS. For this purpose, atomic force microscopy (AFM) analysis of surface morphology and OWLS detection of protein adsorption kinetics were used to evaluate waveguide sensors before and after cleaning. While AFM line scans showed a substantial increase in average waveguide peak‐to‐valley height after RCA cleaning relative to all other methods tested, chemical etching owing to the alkaline component of the rolling circle amplification method rendered the waveguide unusable for detection of protein adsorption with OWLS. A revised method, based on replacement of the alkaline step with immersion in sodium dodecyl sulfate, was not only effective at cleaning OWLS waveguides off‐the‐shelf but also showed excellent protein adsorption reproducibility after ex situ cleaning. Moreover, the revised method showed excellent reproducibility when applied in situ, between repeated adsorption‐elution cycles. Copyright © 2013 John Wiley & Sons, Ltd.     

Pine Needles (Pinus Sylvestris) as a Bioindicator of Sulphur and Heavy Metal Deposition in the Area Around a Pulp and Paper Mill Complex at Kemi,Northern Finland

Abstract

The determination of sulphur and heavy metals in plants is an integral part of many environmental studies. Pine needles (Pinus Sylvestris) have proved to be suitable air quality indicators for pollutants, especially for sulphur. This study was carried out in the vicinity of Kemi, a town situated on the Gulf of Bothnia in northern Finland. An industrial complex comprising two pulp and paper mills is located in the centre of the area. Scots pine (Pinus Sylvestris) needles were collected from 29 sampling sites. The samples were dried, homogenized and digested with nitric acid. The concentrations of the elements S, Fe, Zn, Ca, V, and Pb were determined by ICP-AES. According to our results pine needles (Pinus sylvestris) appear to be an ideal bioindicator and sampling material for identifying and assessing atmospheric sulphur pollution derived from pulp and paper mills and can complement the information provided by plant mapping studies around pulp and paper mills.     

Environmental Determination of Alkylphenol Polyethoxylate Refractory Residues Using Mass Spectrometric Techniques

Abstract

The use of methane chemical ionisation GC/MS gave satisfactory results when applied to environmental analysis of halogenated octylphenol polyethoxylates residues. In addition the selected ion monitoring GC/MS technique has been successfully applied for simulataneous qualitative and quantitative determination of some refractory metabolites of nonylphenol polyethoxylates in secondary sewage effluent and surface waters.     

Retention profile of Fe,Mn and Cu onto chemically treated polyurethane with carbon disulfide

Dithiocarbamate modified polyurethane foam (DTC-PUF) was synthesized as a new solid-phase extraction sorbent for the preconcentration and determination of Fe(II), Mn(II) and Cu(II) in environmental samples using flame atomic absorption spectrometry. Maximum extraction of the elements was achieved at pH 5–7 and flow rate 3 mL min^?1. Quantitative desorption was achieved by 10 mL from 1.0 mol L^?1 HCl solution. The capacity of the sorbent was 149.2 ± 0.5, 237.5 ± 0.2, 200.2 ± 0.1 μg g^?1 and the limit of detection was of 0.015, 0.015 and 0.012 μg mL^?1for Fe(II), Mn(II) and Cu(II), respectively. A preconcentration factor of 100 was obtained for all elements. The developed method was successfully applied to the determination of the tested elements in water (tap and lake) and plant (spinach and parsley leaves) samples and showed good recovery values from 98 to 111% with corresponding RSD values ranged from 0.6 to 8.6%.     

Application of a new focused microwave technology with species-specific isotope dilution analysis for the quantitative extraction of organometallic contaminants in solid environmental matrices

A new self-tuning single-mode-focused microwave technology has been evaluated in this work to perform the quantitative routine extraction of organometallic species from solid matrices of environmental interest. Species-specific isotope dilution analysis has been employed to better investigate the real influence of the microwave-assisted extractions on the final results. The advantages of such methodology in comparison with other established microwave units for the routine speciation analysis of organomercury and organotin compounds are discussed (such as the capability of using disposable glass vials, a self-tuning mode to provide an accurate control of the temperature and pressure inside of the vials, and the possibility of performing automated sequence of extractions with low sample size). The results obtained in this work demonstrated that such technology provides a fast and reliable quantitative extraction of the organometallic species in a wide range of extraction conditions even when the multi-elemental (Sn and Hg) species-specific determination is carried out.     

新型污染物的环境质谱技术研究进展

随着科学技术的飞速发展,质谱检测及其联用技术方法正以前所未有的速度、广度和深度全面渗透到环境分析化学中,其在环境监测中的使用已经或正在日常化.近年来,一些高分辨质谱及其与色谱等的联用技术在目标污染物和非目标污染物的同时甄别鉴定和分析中发挥了重要作用,其对于阐明污染物在环境的归趋具有重要意义.本文对质谱技术及其与气相色谱和液相色谱的联用技术在污染物尤其是新型污染物分析中的进展进行了总结,并对高分辨质谱技术的环境应用研究给于关注,对环境质谱技术的发展方向进行了展望.     

石墨烯应用于样品前处理的研究进展

样品前处理技术在样品分析中发挥着越来越重要的作用,而对分析物的富集能力和对样品基体的净化程度主要取决于高效的样品前处理材料,所以发展高性能的样品前处理材料一直是该领域的前沿研究方向。近年来,各类先进材料已经被引入样品前处理领域,发展了多种高性能的萃取材料。由于独特的物理化学性质,石墨烯已在各个研究领域获得广泛关注,在样品前处理领域也发挥着重要作用。基于高的比表面积、大的π电子结构、优异的吸附性能、丰富的官能团和易于化学改性等优点,石墨烯和氧化石墨烯基萃取材料被成功应用于各种样品的前处理,对不同领域中多种类型分析物表现出优异的萃取性能。该论文总结和讨论了近3年来石墨烯材料(石墨烯、氧化石墨烯及其功能化材料)在柱固相萃取、分散固相萃取、磁性固相萃取、搅拌棒萃取、纤维固相微萃取和管内固相微萃取等方面的研究进展。基于多种萃取机理如π-π、静电、疏水、亲水、氢键等相互作用,石墨烯萃取材料能够高效萃取和选择性富集不同类别的目标分析物,如重金属离子、多环芳烃、塑化剂、雌激素、药物分子、农药残留、兽药残留等。基于新型石墨烯萃取材料的各种样品前处理技术与多种检测技术如色谱、质谱、原子吸收光谱等联用,广泛应用于环境监测、食品安全和生化分析等领域。最后,总结了石墨烯在样品前处理领域中存在的问题,并展望了未来的发展趋势。     

基于共价有机骨架材料的磁固相萃取-超高效液相色谱-串联质谱法测定水中4种杀菌剂

杀菌剂在环境中长期富集后会引起土壤和植物病害,并能借助雨水或灌溉渗透到深层土壤和地下水中,威胁水体环境和人体健康。因此针对水中杀菌剂开发简单快速、高效灵敏的分析方法至关重要。该研究通过原位合成法制备了磁性共价有机骨架材料Fe₃O₄@TpBD,将其作为萃取吸附剂,富集环境水体中苯并咪唑杀菌剂(噻菌灵、麦穗宁、多菌灵)和有机硫杀菌剂(稻瘟灵)。利用Fe₃O₄@TpBD与杀菌剂之间的π-π共轭、氢键和静电作用进行吸附,结合超高效液相色谱-串联质谱法(UHPLC-MS/MS)进行检测,建立了测定水中4种痕量杀菌剂的分析方法。通过透射电子显微镜、X射线衍射及傅里叶变换红外光谱等方式对Fe₃O₄@TpBD进行表征,以证明材料的成功合成。对萃取条件进行一系列的优化(Fe₃O₄@TpBD的磁性比例及用量、水样pH、吸附时间、洗脱液的种类及体积、洗脱时间、NaCl含量),确定了最佳萃取条件。4种杀菌剂在3~1200 ng/L的范围内线性关系良好,线性相关系数均大于0.998,方法的检出限和定量限分别为0.06~0.28 ng/L和0.20~0.92 ng/L。在15、150和600 ng/L 3个加标水平下进行加标回收试验,日内和日间精密度分别为2.8%~10.0%和4.4%~15.7%。将该方法用于实际水样的检测,4种杀菌剂的加标回收率为77.1%~119.1%,在水库水中检测出多菌灵,含量为27.5 ng/L。该方法灵敏度高,准确度和精密度良好,操作简单,耗时短。