Combination of three analytical techniques for speciation of Al in environmental samples

An analytical scheme is proposed which combines three speciation techniques for determination of particular Al species in soil extracts and percolating waters. A cation-exchange fast protein liquid chromatography — inductively coupled plasma atomic emission spectrometry (FPLC-ICP-AES) procedure, a microcolumn chelating ion-exchange chromatography- atomic absorption spectrometry (MCC-ETAAS) technique and the 8-hydroxyquinoline spectrophotometric method (8HQ-spectrophotometry) were employed. The FPLC-ICP-AES procedure offers determination of Al³⁺ (retention time 4.5 min) and Al(OH)²⁺ species (retention time 4.0 min) which are separated from Al(OH)⁺ ₂ (retention time 1.5min). AlF²⁺ coelutes with Al(OH)²⁺ species, while Al(SO₄)⁺, AlF⁺ ₂ and negatively charged Al organic complexes coelute with Al(OH)⁺ ₂ species. The MCC-ETAAS technique enables determination of the sum of positively charged monomeric aqua- and hydroxy-Al species plus sulphate- and fluoro-Al complexes. Employing the 8HQ-spectrophotometry the sum of positively charged monomeric aqua- and hydroxy-Al species plus sulphato- and most of the labile organic Al species are determined. The sensitivities of these selected techniques were adequate for speciation of Al in the samples analyzed. On the basis of the specific selectivity of a particular technique various groups of Al species may be determined. Thus, the comparison of analytical data from complementary procedures provides more comprehensive information on Al species present in soil extracts and percolating waters.     

High-temperature TG/DSC/QMS applications in environmental protection

The decomposition reactions of polystyrene, phenolic resin and a protective undercoating material for automobiles which contains PVC were tested using a new type of thermal analysis — mass spectrometry coupling system for measurements to 1500C or 2000C, which is based on the principle of a two-step skimmer orifice system. The results will be presented, with particular emphasis on the detection sensitivity of the new system for the products of decomposition.The capability of this coupling system to detect even heavy metals such as lead and silver in the waste gases from decomposition or after evaporation at high temperatures will also be demonstrated.     

杭州不同功能区道路灰尘中污染物的分布和有效性

比较研究了杭州城市的工业区、商业区、居民区、公园和附近农村道路灰尘中重金属(Pb、Cu、Cd、Zn、Hg)、P和有机物的积累情况,测定了灰尘分散到水中后污染物在溶液、悬浮物和沉积物中的分配情况。结果表明,不同功能区城市灰尘中污染物含量有较大的变异:重金属一般以工业区和商业区为最高;P以居民区和商业区为最高,而有机物以公园和居民区最高;灰尘中污染物含量随粒径减小而增加。当灰尘分散至水中后,重金属等污染物大部分以沉积相形式存在,少量以溶解相和悬浮相存在;溶解态重金属的比例均较低,平均在0.5%以下,其中ρ(Hg)、ρ(Cd)>ρ(Zn)、ρ(Cu)>ρ(Pb)。而生物有效态(双酸提取)重金属占其总量的比例平均在12%~29%之间,由高到低顺序为Zn,Cd,Cu,Hg,Pb。     

电感耦合等离子体质谱法测定无尘产品中痕量氯

研究了利用电感耦合等离子体质谱仪测定无尘产品中的痕量杂质元素氯含量的方法,检测下限0.06 ng/mL,精密度RSD<5%(n=7),回收率93.7%~110.0%。     

Gel routes to environmental catalysts

Various methods for the preparation of metal oxide catalysts for environmental control purposes are described. These include coprecipitation, sol-gel, and impregnation, and are used to prepare mixed oxide catalysts of the types SnO₂-MO₂ (M=Ce or Zr), SnO₂-Ln₂O₃ (Ln = lanthanide), Ln-doped CeO₂, Cr (VI)-doped SnO₂, and Cu(II)-doped SnO₂. The aggregation in stable colloidal sols of SnO₂, CeO₂ and ZrO₂ is dependent on the concentration of the metal oxide. Techniques for the characterisation of these catalyst materials include gas adsorption, X-ray diffraction, and TEM/EDXA.     

顶空固相微萃取-气相色谱-质谱法测定废水中痕量挥发性烷基硫化物

建立了顶空固相微萃取(HS-SPME)和气相色谱/质谱(GC/MS)联用测定人工湿地废水中的痕量挥发性烷基硫化物的方法。针对废水中两种主要的挥发性烷基硫化物(二甲基硫、二甲基二硫),详细研究了萃取纤维头的种类、萃取时间、萃取温度、pH值、离子强度、样品量及解析条件对HS-SPME的影响。载气为高纯氦气,流速为1.0mL/min,色谱柱为DB-5ms毛细管柱(0.25μm,30m×0.32mm),柱温:25℃(5min)■40℃(1min)■60℃(5min);在优化的实验条件下,本法测定二甲基硫及二甲基二硫的线性范围分别为10～10000ng/L和1～10000ng/L;检出限(3σ)分别为1.9ng/L和1.8ng/L;相对标准偏差小于10%;回收率分别为81.0%～94.6%和84.0%～100.9%。用二乙基硫为内标物质,将本法用于人工湿地废水中主要的烷基硫化物二甲基硫和二甲基二硫的测定,获得满意结果。     

环境水样中硒形态分析的样品预处理

综述了近几年来测定环境水样中硒的样品前处理方法,主要包括样品消解,加入基体改进剂和分离富集3个方面。消解法中主要使用湿法消解;加入基体改进剂适用于石墨炉原子吸收光谱法的样品预处理,可以提高硒的灰化温度,减少硒的损失以及样品中基体的干扰;固相萃取法是萃取法的主要使用手段。     

Improving MCM‐41 as a Nitrosamines Trap through a One‐Pot Synthesis

Copper oxide was incorporated into MCM‐41 by a one‐pot synthesis under acidic conditions to prepare a new mesoporous nitrosamines trap for protection of the environment. The resulting composites were characterized by XRD, N₂ adsorption–desorption, and H₂ temperature‐programmed reduction techniques, and their adsorption capabilities were assessed in the gaseous adsorption of N‐nitrosopyrrolidine (NPYR). The adsorption isotherms were consistent with the Freundlich equation. The copper salt was deposited onto MCM‐41 during the evaporation stage and was fixed on the host in the calcination process that followed. MCM‐41 was able to capture NPYR in air below 373 K but not at 453 K. Loading of copper oxide on MCM‐41 greatly improved its adsorption capability at elevated temperatures. The influence of the incorporation of copper into MCM‐41 samples and the adsorption behavior of these samples are discussed in detail.     

Nanometer-sized zirconium dioxide microcolumn separation/preconcentration of trace metals and their determination by ICP-OES in environmental and biological samples

A new method is proposed using a microcolumn (20 mm × 2.0 mm) packed with nanometer-sized zirconia as solid-phase extractor for the separation/preconcentration of Mn, Cu, Cr, Zn, Ni and Co prior to their determination by inductively coupled plasma optical emission spectrometer (ICP-OES) in environmental samples. The factors affecting the separation and preconcentration of analytes such as pH, sample flow rate and volume, eluent concentration and volume were determined, interfering ions were studied, and the optimal experimental conditions were established. The adsorption capacity of nanometer-sized ZrO₂ for Mn, Cu, Cr, Zn, Ni and Co was found to be 1.3, 1.3, 1.7, 2.0, 3.9 and 1.5 mg g⁻¹, respectively. The detection limits of the method were 12, 58, 24, 2, 7 and 36 ng L⁻¹, respectively, with a preconcentration factor of 25. The precision of this method was 1.7% (Mn), 2.9% (Cu), 5.9% (Mn), 3.8% (Mn), 6.2% (Mn) and 4.3% (Mn) with 9 determinations of 10 ng mL⁻¹ of target analytes, respectively. The method was successfully applied to the determination of trace metals in lake water, dried fish samples, certified reference materials of human hair and milk, and provided satisfactory results.     

环境监测实验室管理系统的开发与应用

基于2005版《计量认证/审查认可(验收)评审准则》要求,为满足环境监测实验室业务流程而设计开发了信息管理系统。该系统主要用于环境监测实验室的资源管理和日常自动化办公。系统采用B/S架构,实现全球化办公运作,能对监测样品的受理、分发、分析、原始记录、监测报告、数据三级审核、报告签发实现全程自动流转,并运用工作流和智能表单设计实现实验室程序文件中各类程序和日常办公事务流程的执行;原始记录和监测报告全部实现自动归档及智能查询;同时根据2005版准则中的要求,对人员、设备、材料、环境要素、记录、质量控制等所有要素全面实施网络化管理。