人中白矿物元素含量分析

用原子吸收分光光度法测定了中药人中白中 1 2种矿物元素含量。结果表明 ,人中白中Ca、Mg、Ba、K和Na的含量在 1× 1 0 3以上 ,而Fe、Cr、Mn的含量在 1 0× 1 0 6 ～ 1 0 0 0× 1 0 6 范围内 ;Ni、Se浓度也超过 1 0× 1 0 6 ,Cu、Co的含量也在 5× 1 0 6 以上。     

悬浮床加氢裂化水溶性催化剂的筛选与表征

催化加氢作用, 当金属组分A和组分B浓度分别为 15 μg/g ～ 25 μg/g 和 1100 μg/g～1300 μg/g时催化剂具有较好的催化加氢活性。两元水溶性催化剂硫化后的XPS、XRD和TEM分析结果表明：活性组分经硫化反应后生成了金属硫化物,但组分A硫化率不足50％;组分B易硫化结晶,其晶粒成为组分A的硫化物晶粒或颗粒分散的“载体”,使组分A的硫化物具有较高的分散度,提高了催化剂的加氢活性;A-B双金属水溶性催化剂经硫化反应后所形成的颗粒尺寸在100 nm左右,说明两元金属催化剂在硫化结晶过程中确实存在相互分散和抑制晶粒增长的作用。     

青海柴达木地区植物白刺叶中微量元素特征

青海柴达木地区分布有丰富的白刺植物资源。利用220FS原子吸收光谱仪分析了该地区三种白刺叶片的Cu,Zn,Fe,Mn,Cr,Ni,Cd等微量元素。结果表明，铬、 锰含量显著提高是青海柴达木地区植物白刺叶资源微量元素特征。这为柴达木地区白刺叶资源的开发利用提供科学依据。     

人参中总皂甙的超声波快速提取方法研究

建立了人参中总皂甙超声波半微量快速提取方法，与索氏提取法相比，此法提取时间由索氏法的1－2个工作日缩短到30min，节省大量试剂，综合提取效率提高数十倍，与索氏提取法对照分析表明，此法可完全满足人参中总皂甙的快速测定要求。     

Determination of Utratrace Silver Using Surfactant As Sensitizer by Catalytic Near Field Laser Thermal Lens Spectrometry

Thermal lens spectrometry (TLS) is an excellent tool for trace analysis1. TLS allows the detection of absorbances of 10-7～10-8, concentration of ≈ 10-11 mol稬-1 and the analysis of 10-15 L volumes with ≈10-2 absorbing molecules2. Kinetic analysis is playing an increasingly important part in modern analytical chemistry. Therefore, TLS shows much promise in combination with kinetic analysis. However, there are few data on TLS applications in kinetic analysis method so far3～4. A ne…     

Conformation and internal mobility of 5H-dibenzo[a,d]cycloheptene derivatives in solution. Conformational analysis of highly flexible structures,part II

Summary The conformational possibilities of 5-(3-N,N-dimethylaminopropyl)-5H-dibenzo[a,d]cycloheptene (1), 5-(3-N,N-dimethylaminopropylidene)-10,11-dihydro-5H-dibenzo[a,d]cycloheptene (2), and 5-(3-N,N-dimethylaminopropyl)-10,11-dihydro-5H-dibenzo[a,d]cycloheptene (3) are analysed using empirical force field methods. Minimum energy conformations, interconversion pathways, interconversion graphs and interconversion energies are examined in view of the analysis of conformer equilibria of1,2, or3 in solution. In addition, some basic requirements of the analysis of fast interconverting conformers using the lanthanide induced shift method are discussed.

---

Konformation und interne Beweglichkeit von 5H-Dibenzo[a,d]cyclohepten Derivaten in Lösung. Konformationsanalyse hochflexibler Strukturen, Teil 2

Zusammenfassung Die konformativen Möglichkeiten von 5-(3-N,N-dimethylaminopropyl)-5H-dibenzo[a,d]cyclohepten (1), 5-(3-N,N-dimethylaminopropylidene)-10,11-dihydro-5H-dibenzo[a,d]cyclohepten (2) und 5-(3-N,N-dimethylaminopropyl)-10,11-dihydro-5H-dibenzo[a,d]cyclohepten (3) wurden mit Hilfe empirischer Kraftfeldmethoden analysiert. Jene Konformationen, die einem energetischen Minimum entsprechen, sowie Interkonversionswege, Interkonversionsgraphen und Interkonversionsenergien wurden in Hinblick auf die Analyse der Konformerengleichgewichte von1,2 oder3 in Lösung untersucht. Weiters werden noch einige grundlegende Voraussetzungen für die Analyse von sich schnell ineinander umwandelnden Konformeren mittels der Lanthaniden-induzierten Verschiebungsmethode besprochen.

     

胶束介质在动力学分析中的应用

评述了胶束介质在动力学分析测定中的作用和应用状况，讨论了胶束催化的动力学特征，胶束对反应物理化学性质的修饰及其在动力学多组份测定和酶催化动力学分析中的应用。     

Chemistry of polyfunctional molecules-123. Reactions of BiBr3, SbI3 and AsI3 with LiN(PPh2)2; X-ray structure of a cyclophosphazene salt containing arsenic(I)

BiBr₃ or SbI₃ react at 20°C with LiN(PPh₂)₂ (1) to give elementary Bi or Sb and the P---P coupled phosphazene ligand Ph₂P---N=PPh₂---PPh₂=N---PPh₂ (2). The reaction of AsI₃ with 1 at room temperature formed yellow needles of the eight-membered heterocycle (3), whereas AsI₃ interacted at 80°C with 1 in the molar ratio of 1:3 to give elementary arsenic and 2. Treatment of AsI₃ and 1 at 20°C in a 1:2 stoichiometry yielded the seven-membered, cyclic arsenium(I) salt

Full-size image

I·4THF (5·4THF), which was characterized by elemental analysis, conductivity, mass, IR and NMR spectroscopy and single-crystal X-ray structural analysis.     

二维卷积在动力学分析中的应用

本文用计算机模拟和二维卷积研究了稀土与间乙酰基偶氮氯膦的显色反应，选择不同的模型参数可描述这类反应的细节，二维卷积则增强对叠合二维谱的分辨。     

Determination of dissolved manganese in natural waters by differential pulse cathodic stripping voltammetry

A procedure based on differential pulse cathodic stripping voltammetry on the graphite electrode is described for the determination of dissolved manganese in natural waters buffered at pH about 6.5 with acetate solution. In order to avoid interference of iron(II) the addition of fluoride is used. The limit of detection is 3 g/l for a deposition time of 6 min. Acidification and UV-irradiation are recommended for samples containing dissolved organic matter. Results of manganese determination in table mineral waters are reported and the possibility of manganese speciation is discussed.