(Ni0.81Fe0.19)1-xCrx作为种子层对NiFe/FeMn交换偏置的影响

采用一种新的种子层材料:(Ni081Fe019)1-xCrx,通过改变种子层中Cr原子的含量,使得在其上生长的NiFeFeMn双层膜的织构和晶粒尺寸产生极大的差异,系统研究了NiFeFeMn双层膜中FeMn晶粒尺寸和织构对交换偏置的影响.实验结果表明,在FeMn的γ相(111)织构较好的前提下,交换偏置场的大小与织构的差异没有关系;FeMn的晶粒尺寸对交换偏置场有很大影响,较小的反铁磁层晶粒对交换偏置场有利,过大的反铁磁层晶粒不利于交换偏置场.将(Ni081Fe019)05Cr05与传统的种子层材料Ta进 关键词： 交换偏置 晶粒尺寸 织构 种子层     

高性能ZnO纳米块体材料的制备及其拉曼光谱学特征

利用六面顶高压设备制备了高密度、低脆性、纳米级的ZnO块体材料，用MDI/JADE5 X射线衍射仪(Cu靶)和XL30S-FEG场发射扫描电子显微镜对高压样品的相组成、晶粒尺寸及微观形貌进行了表征.利用E55+FRA106/5傅里叶变换激光拉曼光谱仪通过ZnO块体样品位于50—500cm^-1之内的拉曼光谱, 研究了极性半导体纳米材料的拉曼光谱学特征.发现在极性半导体ZnO纳米块体材料中，没有出现明显的尺寸限制效应. 关键词： ZnO纳米块体 拉曼光谱 尺寸限制效应     

Two-spin-majority cellular automaton as a model of 2D cluster and interface growth

A new probabilistic cellular automaton model is introduced to simulate cluster and interface growth in two dimensions. The dynamics of this model is an extension to higher dimensions of the compact directed percolation studied by Essam. Numerical results indicate that the two-dimensional cluster coarsening and growth can be described only approximately by the conventional cluster size scaling due to a crossover in the growth mode. The spreading of the initially flat interface follows a purely diffusional,t ^1/2, law.     

原子氢在Be(1010)薄膜上吸附的第一性原理计算

对原子氢在Be(1010)薄膜表面的吸附性质做了第一性原理计算研究.根据原子面间距的不同，可把Be(1010)表面分为两种.计算结果表明，原子氢在这两种表面上的吸附性质显著不同.为阐明和分析这些不同，系统计算和分析了Be(1010)薄膜的表面电子结构、电子功函数、平均静电势和局域电荷密度.这些物理量都自洽地表明，吸附过程中原子氢和表面铍原子间的电荷转移过程对于两种表面是完全不同的.对于L型表面来说，电荷由吸附原子氢向表面Be原子层转移，而对于S型表面而言，电荷转移过程恰恰相反. 关键词： 表面能 功函数 量子尺度效应     

Simultaneous Measurement of Particle Size and Particle Velocity by the Spatial Filtering Technique

The objective of this study was to compare the measuring results of a fiber‐optical probe based on a modified spatial filtering technique with given size distributions of different test powders and also with particle velocity values of laser Doppler measurements. Fiber‐optical spatial filtering velocimetry was modified by fiber‐optical spot scanning in order to determine simultaneously the size and the velocity of particles. The fiber‐optical probe system can be used as an in‐line measuring device for sizing of particles in different technical applications. Spherical test particles were narrow‐sized glass beads in the range 30–100 μm and irregularly shaped test particles were limestone particles in the range 10–600 μm. Particles were dispersed by a brush disperser and the measurements were carried out at a fixed position in a free particle‐laden air stream. Owing to the measurement of chord lengths and to the influence of diffraction and divergent angle, the probe results show differences from the given test particle sizes. Owing to the particle‐probe collisions, the mean velocity determined by the probe is smaller than the laser Doppler mean velocity.     

完全可分的三元系TS(v,4)的支撑集

§ 1　 IntroductionA triple system of order v and indexλ,denoted by TS(v,λ) ,is a collection of3- ele-mentsubsets Aof a v- set X,so thatevery 2 - subsetof X appears in preciselyλ subsets of A.L etλ≥ 2 and (X,A) be a TS(v,λ) .If Acan be partitioned into t(≥ 2 ) parts A1,A2 ,...,Atsuch that each (X,Ai) is a TS(v,λi) for 1≤ i≤ t,then (X,A) is called de-composable.Otherwise it is indecomposable.If t=λ,λi=1for 1≤ i≤ t,the TS(v,λ) (X,A) is called completely decomposable.It …     

分形维数与城市规模分布评析

本在分形概念的基础上，指出城市规模分布是基于统计意义上的一种分形分布，并计算了安徽省1978～1998年城市规模分布的分维值，评析了安徽省城市规模分布变化的特征。     

Simultaneous Measurement of Droplet Size and Three-Components of Velocity in Spray

The combination of the optical diagnostics and image processing technique has produced various methods of practical measurement in engineering. The measurement of size and velocity of droplets in fuel spray is one typical example. In general, the spray is a complicated and three-dimensional two-phase flow; therefore multi-dimensional field measurement of the spray field is indispensable. In the present paper, a technique of simultaneous measurement of droplet size and three-components of velocity is proposed and applied to spray issuing from the swirl nozzle as a practical application. The focused image of glare points is captured by a stereoscopic arrangement, and droplet size and the three-components of velocity are evaluated from the doublet image. Fundamental optical arrangements to capture the image of the glare points with a stereo view are established, and the feasibility and the accuracy of the technique are confirmed. © 2004 The Optical Society of Japan     

Particle Size Analysis by Transmission Fluctuation Spectrometry: Experimental Results Obtained with a Gaussian Beam and Analog Signal Processing

Transmission fluctuation spectrometry (TFS) is a method for the analysis of particle size distributions based on the statistical fluctuations of a transmission signal. Complete information on the PSD and particle concentration can be retrieved by a special transformation of the transmission signal, whereby the expectancy of the transmission square (ETS) is determined after the signal has been subjected to a procedure of spatial and temporal averaging. By varying the averaging parameters over a wide range, a spectrum of ETSs is obtained and introduced into a linear equation system, which yields the PSD. In the experimental realization presented here, variable temporal averaging is realized in the frequency domain with a series of low pass filters at different cutoff frequencies while spatial averaging inevitably occurs as the particles pass through a focused Gaussian beam of finite cross section. Experimental results on spherical particles (glass beads) and non‐spherical particles (SiC) are presented. The PSDs are resolved in 30 intervals within a particle size range from 1–1000 μm, employing a modified Chahine inversion algorithm. So far, the measurements are limited to moderate particle concentrations. Some influences affecting the measurements, especially for higher particle concentrations, are discussed in detail.     

SINGLE MACHINE SCHEDULING WITH CONTROLLABLE PROCESSING TIMES AND COMPRESSION COSTS （PART I：EQUAL TIMES AND COSTS）

Most papers in scheduling research have treated individual job processing times as fixed parameters. However, in many practical situations, a manager may control processing time by realloeating resources. In this paper, authors consider a machine scheduling problemwith controllable processing times. In the first part of this paper, a special case where the pro-cessing times and compression costs are uniform among jobs is discussed. Theoretical results are derived that aid in developing an O（n^2) algorithm to slove the problem optimally. In the second part of this paper, authors generalize the discussion to general case, An effective heuristic to the genera/ problem will be presented.