Surface free energy of CrNx films deposited using closed field unbalanced magnetron sputtering

CrN_x thin films have attracted much attention for semiconductor IC packaging molding dies and forming tools due to their excellent hardness, thermal stability and non-sticking properties (low surface free energy). However, few data has been published on the surface free energy (SFE) of CrN_x films at temperatures in the range 20-170 °C. In this study CrN_x thin films with CrN, Cr(N), Cr₂N (and mixture of these phases) were prepared using closed field unbalanced magnetron sputtering at a wide range of Cr⁺² emission intensity. The contact angles of water, di-iodomethane and ethylene glycol on the coated surfaces were measured at temperatures in the range 20-170 °C using a Dataphysics OCA-20 contact angle analyzer. The surface free energy of the CrN_x films and their components (e.g., dispersion, polar) were calculated using the Owens-Wendt geometric mean approach. The influences of CrN_x film surface roughness and microstructure on the surface free energy were investigated by atomic force microscopy (AFM) and X-ray diffraction (XRD), respectively. The experimental results showed that the lowest total SFE was obtained corresponding to CrN at temperature in 20 °C. This is lower than that of Cr(N), Cr₂N (and mixture of these phases). The total SFE, dispersive SFE and polar SFE of CrN_x films decreased with increasing surface temperature. The film roughness has an obvious effect on the SFE and there is tendency for the SFE to increase with increasing film surface roughness.     

Certain condition on the second fundamental form of CR submanifolds of maximal CR dimension of complex Euclidean space

We treat m-dimensional real submanifolds M of complex space forms ̿M when the maximal holomorphic tangent subspace is (m−1)-dimensional. On these manifolds there exists an almost contact structure F which is naturally induced from the ambient space and in this paper we study the condition h(FX,Y)−h(X,FY) = g(FX,Y)η, η∊ T⊥(M), on the structure F and on the second fundamental form h of these submanifolds. Especially when the ambient space ̿M is a complex Euclidean space, we obtain a complete classification of submanifolds M which satisfy these conditions.Mathematics Subject Classifications (2000): 53C15, 53C40, 53B20.     

Propagation properties of vectorial elliptical Gaussian beams beyond the paraxial approximation

Starting from the vectorial Rayleigh diffraction integral formula and without using the far-field approximation, a solution of the wave equation beyond the paraxial approximation is found, which represents vectorial non-paraxial elliptical Gaussian beams in free space. The far-field expressions for non-paraxial Gaussian beams and elliptical Gaussian beams can be regarded as special cases treated in this paper. Some basic propagation properties of vectorial non-paraxial elliptical Gaussian beams, including the irradiance distribution, phase term, beam widths and divergence angles are studied. Numerical results are given and illustrated.     

Natural Operators Lifting Vector Fields to Bundles of Weil Contact Elements

Let A be a Weil algebra. The bijection between all natural operators lifting vector fields from m-manifolds to the bundle functor K ^A of Weil contact elements and the subalgebra of fixed elements SA of the Weil algebra A is determined and the bijection between all natural affinors on K ^A and SA is deduced. Furthermore, the rigidity of the functor K ^A is proved. Requisite results about the structure of SA are obtained by a purely algebraic approach, namely the existence of nontrivial SA is discussed.     

锥形光纤的偏振特性

随着光通信技术的不断发展，光纤的应用越来越广泛，而锥形光纤以其独特的传光方式越来越多地应用于光纤连接、成像及测量等领域。实验测定了不同锥角和不同长度锥形光纤的偏振特性。理论上，根据麦克斯韦方程组以及边界条件给出了光在理想光纤中的场分布，阐明了实际光纤中光的传输特性。论证了锥形光纤长度与其偏振特性的关系，进而利用几何光学方法对锥形光纤锥角与其偏振特性的关系作了定性说明。并用具体数据进行了定量计算，得出偏振光经锥形光纤传输或耦合后再传输到其终端所得到均是椭圆偏振光的结论。     

同步辐射小角x射线散射方法研究由城市固体垃圾制备的活性炭

应用同步辐射小角x射线散射方法研究了由不同城市固体垃圾制备而成的活性炭的孔结构-结果发现利用木类、纸张、塑料这三类典型垃圾组分的热解残余物为原料制备中孔发达的活性炭是可行的-活性炭的形态和结构取决于垃圾热解残余物的组分和热解程度等因素- 关键词： 小角x射线散射 活性炭 分形维数 平均孔径     

Determination of contact stresses in problems on bending of a package of transversely isotropic bars

A mechanomathematical model for bending of packages of transversely isotropic bars of rectangular cross section is proposed. Adhesion, slippage, and separation zones between the bars are considered. The resolving equations for deflections and tangential displacements are supplemented with a system of linear differential equations for determining the normal and tangential contact stresses, and boundary conditions are formulated. A scheme for analytical solution of two contact problems—a package under the action of a distributed load and a round stamp—is considered. For these packages, a transition is performed from the initial system of differential equations for determining the contact stresses, where the unknown functions are interrelated by recurrent relationships, to one linear differential equation of fourth order and then to a system of linear algebraic equations. This transition allows us to integrate the initial system and get expressions for the contact stresses.Translated from Mekhanika Kompozitnykh Materialov, Vol. 40, No. 6, pp. 761–778, November–December, 2004.     

N[a,b]类中边界Nevanlinna-Pick插值(I)

用所谓的Hankel向量方法求解N[a,b]函数类中带边界插值数据的Nevanlina-Pick插值(BNP(N[a,b]))问题,并建立BNP(N[a,b])问题与[a,b]上的某种带约束条件的Hausdorff矩量问题之间等价的可解条件以及解之间明确的一一对应关系.这使得当BNP(N[a,b])问题有多解时,能通过带约束条件的矩量问题的可解性准则和解获得BNP(N[a,b])问题的可解性准则和解的参数化描述,而在唯一解的情况下,通过BNP(N[a,b])问题解的存在唯一性准则和唯一解来获得带约束条件的     

注入控制铜蒸气激光方向性时间过程测量

实验研究了注入控制对铜蒸气激光非稳腔输出光束质量的影响，从输出光发散角时间分辨过程的测量结果说明注入加速被注入腔内激光发散角的减小过程。由于被注入腔内放大自发辐射的存在，为得到较好的注入控制效果，注入光的脉宽和进入被注入腔的延时必须恰当。     

The role of binder mobility in spontaneous adhesive contact and implications for cell adhesion

The standard view of mechanical adhesive contact is as a competition between a reduction in free energy when surfaces with bonding potential come into contact and an increase in free energy due to elastic deformation that is required to make these surfaces conform. An equilibrium state is defined by an incremental balance between these effects, akin to the Griffith crack growth criterion. In the case of adhesion of biological cells, the molecules that tend to form surface-to-surface bonds are confined to the cell wall but they are mobile within the wall, adding a new phenomenon of direct relevance to adhesive contact. In this article, the process of adhesive contact of an initially curved elastic plate to a flat surface is studied for the case in which the binders that account for adhesion are able to migrate within the plate. This is done by including entropic free energy of the binder distribution in the total free energy of the system. By adopting a constitutive assumption that binders migrate at a speed proportional to the local gradient in chemical potential, the transient growth of an adhesion zone due to binder transport is analyzed. For the case of a plate of very large extent, the problem can be solved in closed form, whereas numerical methods are invoked for the case of a plate of limited extent. Results are presented on the rate of growth of an adhesion zone in terms of system parameters, on the evolution of the distribution of binders and, in the case of a plate of limited extent, on the long-term limiting size of the adhesion zone.