YDHC-10催化剂用于不饱和植物油脂肪酸氢化工艺条件的研究

采用自制的催化剂YDHC-10对氢化工艺条件进行了研究。找出了植物油脂肪酸氢化时,氢化压力2MPa、氢化温度180-200℃、氢化时间60min以及催化剂浓度对植物油脂肪酸氢化的影响．     

Improvement in the synthesis of metallophthalocyanines using microwave irradiation

A successful application of microwave irradiation, in which phthalocyanines were synthesized under solventless conditions from 1,2-phthalonitrile or phthalic anhydride and urea in the presence of metal templates is described. It was found that in comparison with conventional heating, the microwave process is a very useful alternative for cyclotetramerization processes because of reduction of the reaction time, better yield, and easy-to-perform procedure.     

Characterization of chemiluminescence from singlet oxygen under laminar flow conditions in a micro-channel and its quenching with beverages

Singlet oxygen was generated by reaction of sodium hypochlorite and hydrogen peroxide in a micro-channel. The two reagent solutions were delivered into the micro-channel by a syringe pump, providing a laminar flow liquid-liquid interface. The chemiluminescence from the singlet oxygen was emitted in the collapse of the interface due to molecular diffusion under laminar flow conditions. The chemiluminescence intensity was observed continuously and stably for each combination of reagents fed into the micro-channel; while, in the normal batch-type reactor the chemiluminescence peaks from singlet oxygen were observed within ca. 5 s. The features of the chemiluminescence emitted under laminar flow conditions were examined by changing the concentrations of sodium hypochlorite and hydrogen peroxide; the concentrations of 2.5 mM sodium hypochlorite and 7.5 mM hydrogen peroxide provided highest chemiluminescence intensities without bubble formation. Also, the effects of beverages, such as green tea, coffee, white wine, red wine, and sake (rice wine), on the chemiluminescence intensity as well as the concentrations of sodium hypochlorite and hydrogen peroxide were examined. The chemiluminescence intensities observed with addition of the beverages to the reagents decreased in the following orders; green tea > coffee > red wine > rice wine > white wine (being added to sodium hypochlorite); coffee > white wine > green tea > red wine > rice wine (being added to hydrogen peroxide). It was found that coffee decreased the chemiluminescence intensity (ca. 33% chemiluminescence decrease) without altering the concentrations of sodium hypochlorite or hydrogen peroxide. The cause of the decrease in chemiluminescence with coffee is discussed.     

Purification and properties of a β-galactosidase with potential application as a digestive supplement

Functional-based screening of crude β-galactosidase activities from 42 yeast strains resulted in the selection of a single enzyme of potential interest as a digestive supplement. β-Galactosidase produced by Kluyveromyces marxianus DSM5418 was purified to homogeneity by a combination of gel filtration, ion-exchange, and hydroxylapatite chromatographies. The denatured (123 kDa) and native molecular masses (251 kDa) suggest that the enzyme is a homodimer. The optimum pH and temperature of the purified enzyme were 6.8 and 37°C, respectively. The unpurified β-galactosidase in particular displayed a high level of stability when exposed to simulated intestinal conditions in vitro for 4 h. Matrix-assisted laser desorption ionization mass sectrometry analysis revealed that the enzyme's trypsin-generated peptide mass fingerprint shares several peptide fragment hits with β-galactosidases from Kluyveromyces lactis. This confirms the enzyme's identity and indicates that significant sequence homology exists between these enzymes.     

沉淀二氧化硅消光剂的制备研究

涂料中的消光剂是一类能够改变涂膜表面光学性能的助剂。这类助剂能够在涂膜表面产生预期微粗糙度,使涂膜的光泽显著降低,给人一种古朴典雅的感觉。近几年来,我国的涂料工业方兴未艾,涂料总产量也跃居世界的前列。在这期间高光泽的亮光涂料以其色泽鲜艳、明亮等优点深受消费者的喜爱,并在相当长的时间内一统着涂料市场[1]。但是,随着人们生活水平的不断提高,一方面消费者感觉到了高光泽的亮光涂料成膜后反光比较严重,对人的眼睛有害;另一方面消费者的审美观念越来越倾向于休闲、时尚和个性化。这些因素就导致了人们对具有柔和外观的低光泽涂…     

活化条件对活性碳纳米管比表面积的影响

以KOH为活化剂, 研究了多壁碳纳米管在制备活性碳纳米管过程中四个重要影响因素: 活化剂用量、活化温度、活化时间和活化过程中保护气体的流速对所得活性碳纳米管BET比表面积的影响并解释了原因. 研究表明上述四个因素都会对活性碳纳米管的比表面积产生较大的影响, 其中活化剂用量的影响最大, 在研究范围内可引起比表面积增大约241 m²•g^-1. 在这四个影响因素中除活性碳纳米管的比表面积随活化温度的增加而不断增加外, 其他三个影响因素的变化都会使活性碳纳米管的比表面积出现最大值, 而且四个影响因素的改变, 都不改变活性碳纳米管的孔洞主要是中孔和大孔的特点.     

改性累托石吸附水溶液中苯酚的研究I吸附条件的确定

用十二烷基二甲基苄基氯化铵 (1227)、十六烷基三甲基溴化铵 (1631)、十八烷基三甲基溴化铵 (1831) 3种表面活性剂改性天然累托石 (REC) 粘土,分别得到3种有机改性累托石:1227-REC、1631-REC和1831-REC。用有机改性累托石作吸附剂,对水溶液中的苯酚进行吸附研究,考察了pH值、吸附时间、吸附剂用量、温度等因素对吸附效果的影响。结果发现,在本文研究条件下,3种吸附剂对苯酚达到较理想吸附效果的合理条件是:pH值分别为6、8、8;吸附平衡时间分别需要90、20、40min;吸附剂用量均为20g/L;常温。在确定的合理条件下,去除率分别能达到66.2%、99.0%、99.8%。     

1,1,4,4-Tetranitrobutane-2,3-diol and its derivatives. 5. Reaction of 1,1,4,4-tetranitrobutane-2,3-diol with formaldehyde; synthesis and crystal structure of 4,4-dinitro-2,3-dihydroxytetrahydrofuran

1,1,4,4-Tetranitrobutane-2,3-diol reacts with formaldehyde, forming 2,2-dinitropropane-1,3-diol or a cyclic ether — 4,4-dinitro-2,3-dihydroxytetrahydrofuran — as a function of the reaction conditions.Institute of Chemical Physics, Chernogolovka, Russian Academy of Sciences, 142432 Chernogolovka. Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 12, pp. 2755–2759, December, 1992.     

The determination of starting conditions for modifier optimization in reversed-phase HPLC

Summary After a brief introduction of the subject, the paper focusses on the first step in any optimization procedure: the delineation of the parameter space, wherein the global optimum is to be found. For organic modifier optimization in reversed-phase liquid chromatography it is shown that the necessary information can be derived from a single water-methanol gradient. It first yields an estimate of the total number of solutes in the sample, which is vital to define the peak capacity needed to achieve separation at a certain confidence level. Next, the gradient allows the prediction of suitable isocratic methanol binary solvents, and transfer rules formulate the iso-eluotropic composition of the common binary solvents (tetrahydrofuran and acetonitrile). Because all predictions are based on a statistical analysis of a limited data base, attention is given to the practical situation where an actual sample deviates from the average solute behaviour. Such deviations are revealed in the first isocratic run and can be used to arrive at a better estimate of solute retention.