Magnetically recyclable Schiff-based palladium nanocatalyst [Fe3O4@SiNSB-Pd] and its catalytic applications in Heck reaction

A magnetically separable palladium nanocatalyst has been synthesized through the immobilization of palladium onto 3-aminopropylphenanthroline Schiff based functionalized silica coated superparamagnetic Fe₃O₄ nanoparticles. The nanocatalyst (Fe₃O₄@SiNSB-Pd) was fully characterized using several spectroscopic techniques, such as FT-IR, HR-SEM, TEM, XRD, ICP, and XPS. The microscopic image of Fe₃O₄ showed spherical shape morphology and had an average size of 150 nm. The Pd-nanoparticles exhibited an average size 3.5 ± 0.6 nm. The successful functionalization of Fe₃O₄@SiNSB-Pd was identified by FT-IR spectroscopy and the appearance of palladium species in Fe₃O₄@SiNSB-Pd was confirmed by XRD analysis. While XPS has been utilized for the determination of the chemical oxidation state of palladium species in Fe₃O₄@SiNSB-Pd. Several activated and deactivated arene halides and olefines were employed for Mizoroki-Heck cross-coupling reactions in the presence of Fe₃O₄@SiNSB-Pd, each of which produced the respective cross-coupling products with excellent yields. The Fe₃O₄@SiNSB-Pd shows good reactivity and reusability for up to seven consecutive cycles.     

Topological transition in coated wire medium

Employing nonlocal homogenization approach, we investigate the properties of a metamaterial consisting of parallel metallic wires with dielectric coating. We demonstrate that manipulation of dielectric contrast between wire dielectric shell and host material at fixed frequency results in dynamic switching of metamaterial dispersion regime from elliptic to the hyperbolic one, i.e. the topological transition takes place. It is proved that such transition can be induced by the variation of the metamaterial temperature. Our findings thus pave a way to the implementation of a tunable ‘elliptic‐hyperbolic’ metamaterial.     

Modelling of a tubular solid oxide fuel cell with different designs of indirect internal reformer

The cell performance and temperature gradient of a tubular solid oxide fuel cell with indirect internal reformer(IIR-SOFC) fuelled by natural gas, containing a typical catalytic packed-bed reformer, a catalytic coated wall reformer, a catalytic annular reformer, and a novel catalytic annular-coated wall reformer were investigated with an aim to determine the most efficient internal reformer system. Among the four reformer designs, IIR-SOFC containing an annular-coated wall reformer exhibited the highest performance in terms of cell power density(0.67 W cm-2)and electrical efficiency(68%) with an acceptable temperature gradient and a moderate pressure drop across the reformer(3.53×10-5kPa).IIR-SOFC with an annular-coated wall reformer was then studied over a range of operating conditions: inlet fuel temperature, operating pressure, steam to carbon(S : C) ratio, gas flow pattern(co-flow and counter-flow pattern), and natural gas compositions. The simulation results showed that the temperature gradient across the reformer could not be decreased using a lower fuel inlet temperature(1223 K–1173 K)and both the power density and electrical efficiency of the cell also decreased by lowering fuel inlet temperature. Operating in higher pressure mode(1-10 bar) improved the temperature gradient and cell performance. Increasing the S : C ratio from 2 : 1 to 4 : 1 could decrease the temperature drop across the reformer but also decrease the cell performance. The average temperature gradient was higher and smoother in IIR-SOFC under a co-flow pattern than that under a counter-flow pattern, leading to lower overpotential and higher cell performance. Natural gas compositions significantly affected the cell performance and temperature gradient. Natural gas containing lower methane content provided smoother temperature gradient in the system but showed lower power density and electrical efficiency.     

Quick stabilization of capillary for rapid determination of potassium ions in the blood of epilepsy patients by capillary electrophoresis without sample pretreatment

Mutations in the potassium channel genes may be linked to the development of epilepsy and affect the blood potassium levels. Therefore, accurate determination of potassium in the blood will be critical to diagnose the cause of epilepsy. CE is a competent technique for the fast detection of multiple ions, but complicated matrices of a blood sample may cause significant variation of migration times and the peak shape. In this work, a procedure for rapid stabilization of the capillary inner surface through preflushing of a blood sample was employed. The process takes only 40 min for a capillary and then it can be used for more than 2 weeks. No pretreatment of the blood sample or other surface modification of the capillary is needed for the analysis. The RSDs of the migration time and peak area were reduced to 1.5 and 5.1% from 12.6 and 14.5%, respectively. The proposed method has been successfully applied to the determination of the potassium contents in the blood sample of patients with epilepsy at different stages. The recoveries of potassium ions in these blood samples are in a range from 86.5 to 104.5%.     

Direct and inverse problems for electromagnetic scattering by a doubly periodic structure with a partially coated dielectric

Consider the problem of scattering of electromagnetic waves by a doubly periodic Lipschitz structure. The medium above the structure is assumed to be homogenous and lossless with a positive dielectric coefficient. Below the structure there is a perfect conductor with a partially coated dielectric boundary. We first establish the well‐posedness of the direct problem in a proper function space and then obtain a uniqueness result for the inverse problem by extending Isakov's method. Copyright © 2009 John Wiley & Sons, Ltd.     

Nanoparticles and Nanolayers In Commercial Applications

This paper presents particulate and layered materials used in industry with at least one dimension under 500 nm. The objective is to bring to the attention of researchers areas of investigation where new properties and phenomena may manifest. The most relevant materials are natural and synthetic platelets and spherical and coated silica particles.     

Thermophysical properties of ethylene-vinylacetate copolymer (EVA) filled with wollastonite fibers coated by silver

A new type of thermally conductive fibers based on silver coated wollastonite was prepared and characterized. The fibers were used for the preparation of elastic, highly thermally conductive polymeric composites based on ethylene-vinylacetate copolymer (EVA). It was shown that silver coated fibers significantly improved the thermal conductivity of composites despite the low silver volume content. The experimental results were discussed and compared to various theoretical models. The specific heat and the specific density of the composites were also characterized and reported.     

Electrochemical Behavior of Herbal Antitumor Drug Aloe‐Emodin at Carbon‐Coated Nickel Magnetic Nanoparticles Modified Glassy Carbon Electrode

The electrochemical behavior of aloe‐emodin (AE), an important herbal antitumor drug, was investigated at a carbon‐coated nickel magnetic nanoparticles modified glassy carbon electrode (CNN/GCE). A couple of well‐defined redox peaks was obtained. Some electrochemical parameters of AE at a CNN/GCE, such as the charge number, exchange current density, standard heterogeneous rate constant, were measured. The square wave voltammetry (SWV) response of AE was linear with the concentration over two concentration intervals viz. 6.24×10^?9?1.13×10^?6 M and 1.13×10^?6?1.23×10^?5 M, with a detection limit of 2.08 nM. A fast, simple and sensitive detection and analysis of AE was developed.     

Tin oxide coating on polytetrafluoroethylene films in aqueous solutions

Polytetrafluoroethylene (PTFE) films were successfully coated with tin oxide in aqueous solutions. Tin oxide was crystallized in the solution and formed nanocrystal coatings on the polymer films. The coatings consisted of SnO₂ and SnO crystals. They were assemblies of tin oxide nanosheet of about 10 to 50 nm in size and about 5 nm in thickness. The nanocrystal films can be exfoliated from the PTFE substrates. Tin oxide nanocrystal films had a rough liquid surface and a dense substrate‐side surface. Transparency of PTFE films coated with tin oxide was same as that of bare PTFE films in the range from 400 to 800 nm. The PTFE films coated with tin oxide nanocrystals can be pasted on desired substrates. Copyright © 2009 John Wiley & Sons, Ltd.     

CE detection of N‐(3‐dimethylaminopropyl)‐N‐carbodiimide/N‐hydroxysuccinimide‐coupled proteins after homo‐ and hetero‐crosslinking reactions

Protein–protein conjugates formed by carbodiimide crosslinking reactions have been analyzed for the first time using CE. Lysozyme and BSA were chosen as model proteins to study the efficacy of N‐(3‐dimethylaminopropyl)‐N‐ethylcarbodiimide and N‐hydroxysuccinimide as crosslinkers. Detection of the molecular mass increase was checked by SDS‐PAGE. Commercially available, PVA‐coated capillaries showed appropriate selection, while phospho‐deactivated and dynamic PVA‐coated capillaries did not give suitable resolution. CE was found to be an efficient tool to characterize homo‐ (lysozyme–lysozyme) and hetero‐ (lysozyme–BSA) protein coupling by suitable variations of electrophoretic mobilities.