Silica-coated magnetic palladium nanocatalyst for Suzuki-Miyaura cross-coupling

A silica-coated magnetically separable Schiff-base palladium nanocatalyst was developed. Amorphous silica was used to encapsulate the magnetic Fe₃O₄ and an organic amine functionality was added to the silica surface. The amino group was treated with 1, 10-phenanthroline-2,9-dicarboxaldehyde to produce a Schiff-base, which was then treated with palladium to produce the silica coated magnetic Schiff-base palladium nanocatalyst. The palladium nanocatalyst was fully characterized using several spectroscopic techniques. The HR-SEM image of silica coated Fe₃O₄ revealed a globular shape with a diameter of 145 nm, along with this the average palladium nanoparticle size was 3.5 ± 0.6 nm. The successful functionalization and the appearances of the palladium species as a magnetic catalyst was confirmed by FT-IR and XRD analysis. The palladium nanocatalyst was successfully applied for the construction of CC bonds via Suzuki-Miyaura reaction. With a variety of organoboronic acids, the catalyst displayed great performance for electron-poor and electron-rich aryl halides, resulting in excellent yields of the corresponding cross-coupling products. The magnetic catalyst was retrieved from the reaction vial using an external strong magnet, and it was reused seven times without a significant drop in the production of the corresponding biaryl product.     

Removal of arsenic from aqueous solution: A study of the effects of pH and interfering ions using iron oxide nanomaterials

Nanophase Fe₃O₄ and Fe₂O₃ were synthesized through a precipitation method and were utilized for the removal of either arsenic (III) or (V) from aqueous solution as a possible method for drinking water treatment. The synthesized nanoparticles were characterized using X-ray diffraction, which showed that the Fe₃O₄ and the Fe₂O₃ nanoparticles had crystal structures of magnetite and hematite, respectively. In addition, Secherrer's equation was used to determine that the grain size nanoparticles were 12 ± 1.0 nm and 17 ± 0.5 nm for the Fe₂O₃ and Fe₃O₄, respectively. Under a 1 h contact time, batch pH experiments were performed to determine the optimum pH for binding using 300 ppb of either As(III) or (V) and 10 mg of either Fe₃O₄ or Fe₂O₃. The binding was observed to be pH independent from pH 6 through pH 9 and a significant drop in the binding was observed at pH 10. Furthermore, batch isotherm studies were performed using the Fe₂O₃ and Fe₃O₄ to determine the binding capacity of As(III) and As(V) to the iron oxide nanomaterials. The binding was found to follow the Langmuir isotherm and the capacities (mg/kg) of 1250 (Fe₂O₃) and 8196 (Fe₃O₄) for As(III) as well as 20,000 (Fe₂O₃) and 5680 (Fe₃O₄) for As(III), at 1 and 24 h of contact time, respectively. The As(V) capacities were determined to be 4600 (Fe₂O₃), 6711(Fe₃O₄), 4904 (Fe₂O₃), and 4780 (Fe₃O₄) mg/kg for nanomaterials at contact times of 1 and 24 h respectively.     

EPR characterization of half-integer-spin iron molecule-based magnets

We report single crystal high-frequency electron paramagnetic resonance studies of two recently discovered half-integer Fe₇ complexes: [Fe₇O₃(O₂CBu^t)₉(mda)₃(H₂O)₃] (1) and [Fe₇O₄(O₂CPh)₁₁(dmem)₂] (2). The obtained spectra confirm spin S = 5/2 ground states for both complexes. On the basis of detailed frequency and field orientation dependent studies, we find that complex 1 is a single-molecule magnet (uniaxial zero-field-splitting parameter, D < 0) while complex 2 is not (D > 0). The EPR linewidth for complex 1 is considerably narrower in comparison to spectra obtained for other single-molecule magnets, suggesting the possibility of reduced decoherence from nuclear spins (⁵⁶Fe has no nuclear moment).     

Highly active PtRuFe/C catalyst for methanol electro-oxidation

High methanol electro-oxidation activity was obtained on novel PtRuFe/C (2:1:1 at.%) catalyst. Mass and specific activities were 5.67 A  g⁻¹ catal. and 177 mA m⁻² for the PtRuFe/C catalyst while those of the commercial PtRu/C catalyst were 2.28 A g⁻¹ catal. and 87.7 mA m⁻², respectively. CO stripping results showed that on-set voltage for CO electro-oxidation was lowered by incorporation of Fe. XRD and XPS results revealed that Fe₂O₃ was formed instead of Fe(0), which resulted in large electron deficiency in Pt and easy CO electro-oxidation. The electron deficiency of Pt was proved by XPS results of Pt4f peaks, which moved to higher binding energies in PtRuFe/C than PtRu/C.     

A convenient MnIII starting material for the synthesis of homo- and heterometallic manganese carboxylate clusters: Mn9 and Mn10−xFex complexes

The use of a convenient source of Mn^III ions, namely the [Mn(OR)(O₂CR′)₂]_n (R = H, Me, and R′ = Me, Bu^t) family of 1-D coordination polymers, afforded two new enneanuclear and decanuclear molecular clusters, homometallic [Mn₉O₇(O₂CBu^t)₁₃(MeCN)₂] (3) and heterometallic [Mn_10?xFe_x(OMe)₂₀(O₂CMe)₁₀] (x < 10) (4), respectively. Compound 3 was synthesized by a solvent-induced structural transformation, whereas complex 4 resulted from the reaction of [Mn(OH)(O₂CMe)₂]_n with an Fe^III source. The core of 3 comprises two [Mn₄O₂]⁸⁺ butterfly units and a [Mn₃O]⁷⁺ triangular unit fused together by sharing one Mn atom. Magnetic susceptibility measurements of 3 revealed dominant antiferromagnetic interactions within the molecule, and a ground state of S = 1 with many low-lying excited states. Complex 4 is a mixed Fe^III/Mn^III single-strand molecular wheel, which forms 3D nanotubular stacks arranged in a zig–zag fashion. The described work suggests that the [Mn(OR)(O₂CR′)₂]_n compounds represent excellent starting materials for Mn^III carboxylate cluster chemistry.     

Role of core diameter and silica content in photocatalytic activity of TiO2/SiO2/Fe3O4 composite

Magnetically separable TiO₂/SiO₂/Fe₃O₄ composites of different core (Fe₃O₄) diameters and silica contents have been prepared by sol–gel technique for both silica and titania coatings. Energy dispersive X-ray fluorescence (EDX), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), BET surface area analysis and scanning electron microscope (SEM) have been used for characterization of prepared samples. Photocatalytic activity of the prepared samples has been investigated by photodegradation of methyl orange. Obtained results have shown that 25–45 μm core diameter exhibits the maximum activity since it possesses a convenient surface area and light transmittance. Silica content has a significant effect on the activity of composite. Silica content of more than 10 wt% has reduced the catalyst activity because of the increase in particle diameter and reduction of surface area.     

Microwave-assisted synthesis and characterization of hexagonal Fe3O4 nanoplates

Hexagonal magnetite (Fe₃O₄) nanoplates with an average edge length of 80 nm were successfully prepared in large quantities by a facile microwave-assisted route. The influences of experiment parameters such as reaction time, microwave power, and concentration of NaOH and other additive agents on the morphology and size of final products were investigated in detail. Phase structure, morphology and magnetic properties of products were carefully studied by X-ray diffraction (XRD), transmission electron microscopy (TEM), selected area electron diffraction (SAED), high-resolution transmission electron microscope (HRTEM), and vibrating sample magnetometer (VSM). Magnetic studies revealed that hexagonal Fe₃O₄ nanoplates have low saturation magnetization of 36.4 emu/g and the possible reason has been proposed.     

New α,ω-dicarboxylate coordination polymers with 4,4′-bipyridine: Cu(bpy)(C5H6O4), Zn(bpy)(C5H6O4), Zn(bpy)(C6H8O4) and Mn(bpy)(C8H12O4) · H2O

Four 4,4′-bipyridine α,ω-dicarboxylate coordination polymers Cu(bpy)(C₅H₆O₄) (1), Zn(bpy)(C₅H₆O₄) (2), Zn(bpy)(C₆H₈O₄) (3) and Mn(bpy)(C₈H₁₂O₄) · H₂O (4) have been synthesized and structurally characterized by single crystal X-ray diffraction methods (bpy = 4,4-bipyridine, (C₅H₆O₄)²⁻ = glutarate anion, (C₆H₈O₄)²⁻ = adipate anion, (C₈H₁₂O₄)²⁻ = suberate anion). Their crystal structures are featured by dimeric metal units, which are co-bridged by 4,4′-bipyridine ligands and dicarboxylate anions such as glutarate, adipate and suberate anions to generate 2D layers with a (4,4) topology in 1, 2 and 4 as well as to form 3D frameworks in 3. Two 3D frameworks in 3 interpenetrate with each other to form a topology identical to the well-known Nb₆F₁₅ cluster compound. Over 5–300 K, the paramagnetic behavior of 4 follows the Curie–Weiss law χ_m(T − Θ) = 4.265(5) cm³ mol⁻¹ with the Weiss constant Θ = −6.3(2) K. Furthermore, the thermal behavior of 3 and 4 is also discussed.     

Studies on Fe–Co spinel electrodes

FeCo₂O₄ spinel oxide pelleted electrodes were prepared from the respective powders, obtained by low-temperature coprecipitation method. X-ray diffraction studies suggest the coexistence of two spinel phases, with different a-cell parameters. The samples show semiconductor-type behaviour, in the range 530–340 K. The estimated activation energy for conduction is about 0.7 eV. These phases are stable, after being used as electrode materials, as the XRD and SEM/EDS results show. Cyclic voltammetry has been used to investigate the electrochemical behaviour of the FeCo₂O₄ electrodes in 1 mol dm⁻³ KOH aqueous solutions. The voltammetric data allowed finding out the redox reactions occurring at the electrode surface, namely Fe₃O₄·4H₂O/Fe(OH)₂ or Fe₃O₄/Fe₂O₃ and CoO₂/CoOOH by comparing the experimental results with those referred in the literature.     

Iron (III) nanocomposites for enzyme-less biomimetic cathode: A promising material for use in biofuel cells

In this paper, we discuss the synthesis and electrochemical properties of a new material based on iron oxide nanoparticles stabilized with poly(diallyldimethylammonium chloride) (PDAC); this material can be used as a biomimetic cathode material for the reduction of H₂O₂ in biofuel cells. A metastable phase of iron oxide and iron hydroxide nanoparticles (PDAC–FeOOH/Fe₂O₃-NPs) was synthesized through a single procedure. On the basis of the Stokes–Einstein equation, colloidal particles (diameter: 20 nm) diffused at a considerably slow rate (D = 0.9 × 10^? 11 m s^? 1) as compared to conventional molecular redox systems. The quasi-reversible electrochemical process was attributed to the oxidation and reduction of Fe³⁺/Fe²⁺ from PDAC–FeOOH/Fe₂O₃-NPs; in a manner similar to redox enzymes, it acted as a pseudo-prosthetic group. Further, PDAC–FeOOH/Fe₂O₃-NPs was observed to have high electrocatalytic activity for H₂O₂ reduction along with a significant overpotential shift, ΔE = 0.68 V from ? 0.29 to 0.39 V, in the presence and absence of PDAC–FeOOH/Fe₂O₃-NPs. The abovementioned iron oxide nanoparticles are very promising as candidates for further research on biomimetic biofuel cells, suggesting two applications: the preparation of modified electrodes for direct use as cathodes and use as a supporting electrolyte together with H₂O₂.     

Tremella-like molybdenum dioxide consisting of nanosheets as an anode material for lithium ion battery

Tremella-like structured MoO₂ consisting of nanosheets was obtained via a Fe₂O₃-assisted hydrothermal reduction of MoO₃ in ethylenediamine aqueous solution. The as-prepared product was characterized and tested with scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS), cyclic voltammetry (CV) and capacity measurement as anode material for lithium ion batteries. This structured MoO₂ shows very high reversible capacity (>600 mA h g⁻¹), good rate capability and cycling performance, presenting potential application as anode material for lithium ion batteries with high rate capability and high capacity.     

Synthesis and characterization of amino-functionalized single magnetic core–silica shell composites

The thermal decomposition approach, reverse micro-emulsion system and surface modification technique had been successfully used to synthesis single magnetic core Fe₃O₄@Organic Layer@SiO₂–NH₂ complex microspheres. The magnetization of the magnetic microspheres core could be easily tuned between 28 and 56 emu/g by adjusting the amount of 2-mercaptobarbituric acid. It was found that the Organic Layer to some extent had a protective effect on avoiding Fe₃O₄ being oxidized into Fe₂O₃. Each Fe₃O₄@Organic Layer microsphere could be coated uniformly by about 30 nm of silica shell. The average diameter of the Fe₃O₄@Organic Layer@SiO₂ composites was about 538 nm. The saturation magnetization of the Fe₃O₄@Organic Layer@SiO₂ complex microspheres was 12.5% less than magnetic microspheres cores. The Fe₃O₄@Organic Layer@SiO₂–NH₂ composites possessed a huge application potentiality in specificity enriching and separating biological samples.     

Fabrication and properties of Mn0.5Zn0.5Fe2O4 nanofibers

Zn-doped α-FeOOH nanofiber was synthesized by coprecipitation method. Then the α-FeOOH was enwraped by the complex of the Mn²⁺ and citric acid. The morphology of α-FeOOH did not transform after the calcination process and Mn_0.5Zn_0.5Fe₂O₄ nanofiber was successfully prepared. The phase, morphology, particle diameter and the magnetic properties of samples were studied by X-ray diffraction (XRD), transmission electron microscopy (TEM) and vibrating sample magnetometer (VSM). The results indicated that Mn_0.5Zn_0.5Fe₂O₄ nanofibers with an aspect ratio over 40 and a diameter of 20 nm were prepared. Compared with the amorphous Mn_0.5Zn_0.5Fe₂O₄, the anisotropy of the Mn_0.5Zn_0.5Fe₂O₄ nanofiber increased, resulting in the higher coercivity and magnetization of the obtained sample. With an increase in the calcination temperature, the diameter and the saturation magnetization of the sample increased, while the aspect ratio and coercivity decreased. The coercivity of the sample obtained at 700 °C was maximal (up to 185.4 Oe). The saturation magnetization of the sample obtained at 900 °C was maximal (up to 65.3 emu/g). The use of citric acid method prevented the presence of Mn(OH)₂, resulting in the decrease of the calcination temperature.     

Diiron chelate complexes relevant to the active site of the iron-only hydrogenase

A novel unsymmetrically disubstituted propanedithiolate compound [Fe₂(CO)₄(κ²-dmpe)(μ-pdt)] (1) (pdt = SCH₂CH₂CH₂S, dmpe = Me₂PCH₂CH₂PMe₂) was synthesized by treatment of [Fe₂(CO)₆(μ-pdt)] with dmpe in refluxing THF. Compound 1 was characterized by single-crystal X-ray diffraction analysis. Protonation of 1 with HBF₄·Et₂O in CH₂Cl₂ gave at room temperature the μ-hydrido derivative [Fe₂(CO)₄(κ²-dmpe)(μ-pdt)(μ-H)](BF₄)] (2). At low temperature, ¹H and ³¹P–{¹H} NMR monitoring revealed the formation of a terminal hydride intermediate 3. Comparison of these results with those of a VT NMR study of the protonation of symmetrical compounds [Fe₂(CO)₄L₂(μ-pdt)] [L = PMe₃, P(OMe)₃] suggests that in disubstituted bimetallic complexes [Fe₂(CO)₄L₂(μ-pdt)], dissymmetry of the complex is required to observe terminal hydride species. Attempts to extend the series of chelate compounds [Fe₂(CO)₄(κ²-L₂)(μ-pdt)] by using arphos (arphos = Ph₂AsCH₂CH₂PPh₂) were unsuccessful. Only mono- and disubstituted derivatives [Fe₂(CO)_6−n(Ph₂AsCH₂CH₂PPh₂)_n(μ-pdt)] (n = 1, 4a; n = 2, 4b), featuring dangling arphos, were isolated under the same reaction conditions of formation of 1. Compound 4b was structurally characterized.     

Preparation and characterization of NiO(core)/Fe2O3(shell) composite particles

A novel hydrothermal coating process has been developed to deposit amorphous Ni(OH)₂·H₂O over octahedral α-Fe₂O₃ particles by treating aqueous dispersion of the preformed cores in Ni(NO₃)₂/CH₃COONa solution. NiO_(core)/Fe₂O_3(shell) composite particles were prepared by air sintering of the Ni(OH)₂·H₂O_(shell)/Fe₂O_3(core) particles at 200–500°C for 1–6 h. The changes of morphology, structure and weight of the hydrothermal and sintering products were studied by means of TEM, XRD, XPS, TG and IR analyzers. The nucleation and growth model was suggested for the non-isothermal decomposition of Ni(OH)₂·H₂O coatings and the kinetic equation was derived from the non-linear regression of the TG data. The activation in the thermal-decomposition process is 73.8 kJ mol⁻¹ and the pre-exponential factor is 1.95×10⁴ s⁻¹.     

Synthesis and properties of magnetite Fe3O4 via a simple hydrothermal route

Magnetic Fe₃O₄ crystals were synthesized by a simple hydrothermal method using K₄Fe(CN)₆ as single precursor. The chemical compositions and morphologies of the as-prepared samples were characterized in detail by X-ray diffraction (XRD), X-ray photoelectron spectra (XPS) and scanning electron microscopy (SEM). The experimental results show that the magnetic Fe₃O₄ particles are facilely prepared by the hydrothermal reaction of K₄Fe(CN)₆ and NaOH at 200 °C. Regular octahedral Fe₃O₄ crystals are obtained when Na₂S₂O₃ is added to the reaction system. The possible mechanism was discussed to elucidate the formation of the magnetic Fe₃O₄ crystals. Besides, the magnetic investigations show that the values of saturation magnetization and coercivity of octahedral Fe₃O₄ are about 87 emu/g and 184 Oe, respectively. Octahedral Fe₃O₄ also exhibits relatively good catalytic performance in the oxidation of styrene.     

New derivatives of an enneanuclear Mn SMM

The reaction of the neutral triangular species [Mn₃O(O₂CR)₆L₃] (R = Me, Ph, CMe₃; L = py) with the tripodal ligands H₃tmp (1, 1, 1-tris(hydroxymethyl)propane) and H₄peol (pentaerythritol) affords the enneanuclear complexes [Mn₉O₇(O₂CMe)₁₁(tmp)(py)₃(H₂O)₂] (2); [Mn₉O₇(O₂CMe)₁₁(Hpeol)(py)₃(H₂O)₂] (3); [Mn₉O₇(O₂CCMe₃)₁₁(Hpeol)(py)₃(H₂O)₂] (4); and [Mn₉O₇(O₂CPh)₁₁(Hpeol)(py)₃(H₂O)₂] (5). Complexes 2–5 are characterized by spin ground states of S = 17/2 with axial zero-field splitting parameters in the range D = −0.26–0.30 cm⁻¹. Sweep-rate and temperature dependent hysteresis loops diagnostic of SMM behaviour are observed below 1.2 K featuring steps at regular intervals of field.     

Mesoporous Fe2O3 nanoparticles as high performance anode materials for lithium-ion batteries

This work introduces an effective, inexpensive, and large-scale production approach to the synthesis of Fe₂O₃ nanoparticles with a favorable configuration that 5 nm iron oxide domains in diameter assembled into a mesoporous network. The phase structure, morphology, and pore nature were characterized systematically. When used as anode materials for lithium-ion batteries, the mesoporous Fe₂O₃ nanoparticles exhibit excellent cycling performance (1009 mA h g^− 1 at 100 mA g^− 1 up to 230 cycles) and rate capability (reversible charging capacity of 420 mA h g^− 1 at 1000 mA g^− 1 during 230 cycles). This research suggests that the mesoporous Fe₂O₃ nanoparticles could be suitable as a high rate performance anode material for lithium-ion batteries.     

Synthesis and characterization of organophosphine/phosphite stabilized N-silver(I) succinimide: crystal structure of [(Ph3P)3 · AgNC4H4O2]

Six organophosphine/phosphite stabilized N-silver(I) succinimide complexes of the type L_n · AgNC₄H₄O₂ (L = PPh₃; n = 1, 2a; n = 2, 2b; n = 3, 2c; L = P(OEt)₃; n = 1, 2d; n = 2, 2e; n = 3, 2f) have been prepared by reacting [AgNC₄H₄O₂], which can be synthesized from succinimide and excessive Ag₂O in boiling water, with triphenylphosphine or triethylphosphite in dichloromethane under a nitrogen atmosphere. These complexes were obtained in high yields and characterized by elemental analysis, ¹H, ¹³C{H} NMR, IR spectroscopy and thermal analysis (TG and DSC). The molecular structure of 2c has been determined by X-ray single crystal analysis, in which the silver atom is in a distorted tetrahedral geometry.     

Nanorods of transition metal oxalates: A versatile route to the oxide nanoparticles

A versatile route has been explored for the synthesis of nanorods of transition metal (Cu, Ni, Mn, Zn, Co and Fe) oxalates using reverse micelles. Transmission electron microscopy shows that the as-prepared nanorods of nickel and copper oxalates have diameter of 250 nm and 130 nm while the length is of the order of 2.5 μm and 480 nm, respectively. The aspect ratio of the nanorods of copper oxalate could be modified by changing the solvent. The average dimensions of manganese, zinc and cobalt oxalate nanorods were 100 μm, 120 μm and 300 nm, respectively, in diameter and 2.5 μm, 600 nm and 6.5 μm, respectively, in length. The aspect ratio of the cobalt oxalate nanorods could be modified by controlling the temperature.The nanorods of metal (Cu, Ni, Mn, Zn, Co and Fe) oxalates were found to be suitable precursors to obtain a variety of transition metal oxide nanoparticles. Our studies show that the grain size of CuO nanoparticles is highly dependent on the nature of non-polar solvent used to initially synthesize the oxalate rods. All the commonly known manganese oxides could be obtained as pure phases from the single manganese oxalate precursor by decomposing in different atmospheres (air, vacuum or nitrogen). The ZnO nanoparticles obtained from zinc oxalate rods are ～55 nm in diameter. Oxides with different morphology, Fe₃O₄ nanoparticles faceted (cuboidal) and Fe₂O₃ nanoparticles (spherical) could be obtained.