Regioselective synthesis and biological activity of oxidized chitosan derivatives

Oxidized chitosan derivatives with various degrees of oxidation (DS, 0.1–1.0) were prepared by the treatment of chitosan with CrO₃/aq HClO₄ or by the oxidation of ­3‐O‐ and N‐protected chitosan with 30% aq H₂O₂/Na₂WO₄ followed by 3‐O‐ and N‐deprotection. The oxidized products were then N‐acetylated with Ac₂O in order to improve their water‐solubility. Although the oxidized chitosan derivative of DS 0.28 and the degree of N‐acetylation of chitosan (DA) 38% was insoluble in the pH 3–8 region, that of DS 0.26 and DA 76% was soluble in the neutral pH range. The newly‐prepared acetylated and oxidized chitosan derivatives were found to suppress the chemiluminescence response of inflammatory cells such as canine polymorphonuclear cells (PMNs). Analysis by the surface plasmon resonance method revealed that the bind and release behavior of PMNs to acetylated oxidized chitosan derivatives was similar to that against carboxymethylated chitosan derivatives. The amount of water‐soluble chitosan derivative bound to cytokine IL‐8 was found to be affected by the structural and electronic features of the chitosan substituents in the chitosan chain. Copyright © 2003 John Wiley & Sons, Ltd.     

Spectroscopic characterization and preparation of low molecular,water‐soluble chitosan with free‐amine group by novel method

Low molecular, water‐soluble chitosan (LMWSC) with a free amine group was prepared by the novel salts‐removal method described in this study. A weight‐average molecular weight and degree of deacetylation (DDA) of LMWSC were determined by viscometry and Kina titration, resulting in 18,579 Da and 93% DDA, respectively. In the Fourier transform infrared spectroscopic, ¹H NMR, and ¹³C NMR spectra the absorption band by the carboxyl group derived from lactic acid and the impurities formed in the enzymatic process disappeared or were significantly lower than that of the control chitosan. Also, from the ¹H NMR and ¹³C NMR spectra the empirical value for the area ratio of the proton and carbon corresponds nearly to its theoretical values. The matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrum identified the difference in the two adjacent peaks as 161. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3796–3803, 2002     

Hydroxypropyl chitosan bearing beta-cyclodextrin cavities: synthesis and slow release of its inclusion complex with a model hydrophobic drug

Hydroxypropyl chitosan-graft-carboxymethyl beta-cyclodextrin (HPCH-g-CM beta-CD) was synthesized by grafting CM beta-CD onto HPCH using water soluble 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC) as the condensing agent. Due to the presence of hydrophobic beta-CD rings onto the HPCH backbone, this polymer can be used as a matrix for controlled drug release. The adsorption of a hydrophobic model drug, ketoprofen, by HPCH-g-CM beta-CD microparticles (using tripolyphosphate as an ionic crosslinking agent) fitted well in the Langmuir isotherm equation. The drug dissolution profile showed that HPCH-g-CM beta-CD microparticles provided a slower release of the entrapped ketoprofen than chitosan, and the release behavior was influenced by the pH value of the medium. These results suggest that beta-CD grafted with chitosan derivatives may become a potential biodegradable delivery system to control the release of hydrophobic drugs with pH-responsive capability.     

壳聚糖-氨基酸体系中碳酸钙模拟生物矿化的研究

本文选取壳聚糖与氨基酸作为碳酸钙模拟生物矿化的有机基质,研究并比较了侧链带不同电荷的氨基酸对碳酸钙生物矿化的调制作用,发现侧链带负电荷的酸性氨基酸能改变壳聚糖体系中原有的晶种模板,使能量比较高的球霰石型碳酸钙得以生成,而单纯的壳聚糖体系中只能得到方解石型碳酸钙;在形貌上则改变了球霰石型碳酸钙原有的球状堆积,出现了两头小、中间大椭球状的特殊形貌。     

Controlled Chemical Modifications of Chitosan. Characterization and Investigation of Original Properties

The main techniques developed to characterize chitosan are recalled. The interaction of chitosan with oppositely charged surfactants was investigated giving very important surface activity effects. A few chemical modifications are described and the new properties obtained are mentioned: alkylation gives amphiphilic polymers having interesting thickening behavior; grafting cyclodextrin (chit‐CD) gives a polymer able to include hydrophobic molecules; grafting adamantane gives an amphiphilic polymer able to specifically interact with chit‐CD forming a temporary network with gel‐like behavior.

The viscosities of adamantane‐chitosan, cyclodextrin‐chitosan, and unmodified chitosan solutions studied here.     

CS-CMC聚合物电解质膜的制备及在电生成FeO_4~(2-)中的应用

以戊二醛为交联剂,制备了壳聚糖(CS)-羧甲基纤维素(CMC)聚合物电解质膜.用电子显微镜观察其表面形貌.IR分析表明该聚合物薄膜含有COOH,NH 3官能团,具有两性离子的特征.与CS膜或CMC膜相比,该膜能稳定存在于酸碱溶液中.膜特性研究表明CS-CMC聚合物电解质膜具有离子交换和选择性渗透能力,可作为隔膜电解制备高铁酸盐.     

Chitosan as a biosorbent for adsorption of iron (II) from fracking wastewater

In this work, porous chitosan (CS) was investigated as a biosorbent for the removal of iron (II) from the synthetic fracking wastewater. The underlying problem with the production water from fracking industries is that it contains iron (II) up to 55 mg/L, which needs to be eliminated. Porous CS had a specific surface area of 1.05 m²/g with the average pore diameter of 319 A, as determined by using Brunauer‐Emmett‐Teller surface area analysis. The kinetics, isotherms, and thermodynamic analysis confirm that the porous CS can be a potential candidate for iron (II) removal. Both the pseudo‐first‐order model and pseudo‐second‐order model have good fit on iron (II) adsorption with the porous CS. Kinetic studies revealed that the CS‐iron (II) adsorption system was controlled by intraparticle diffusion. The monolayer adsorption capacity of the porous CS from Langmuir model was found to be 51.81 mg/g. The experimental data were fitted against common adsorption isotherms and yielded excellent fits in the following order: Langmuir > Temkin > Freundlich > Dubinin‐Radushkevich isotherms. Thermodynamic studies revealed that the adsorption of iron (II) onto porous CS was feasible and spontaneous. The adsorption process is endothermic, and the entropy is the driving force.     

Layer‐by‐layer deposition of antimicrobial polymers on cellulosic fibers: a new strategy to develop bioactive textiles

In recent years, there has been an increase of infectious diseases caused by different microorganisms and the development of antibiotic resistance. In this way, the search for new and efficient antibacterial materials is imperative. The main polysaccharides currently used in the biomedical and pharmaceutical domains are chitin and its derivative chitosan (CH) and alginates (ALG). In this study, a simple technique of Layer by Layer (LbL) of applying polycation CH and polyanion ALG was used to prepare CH/ALG multilayers on cotton samples via the electrostatic assembly with success. The CH/ALG cotton samples (functionalized) were investigated for their antibacterial properties towards Staphylococcus aureus and Klebsiella pneumonia using the international standard method JIS L 1902:2002. The antibacterial activity of the functionalized samples was tested in terms of bacteriostatic and bactericidal activity, and results showed that the samples exhibited a bacteriostatic effect on the two bacteria tested, as expected. In addition, samples with five layers (CH/ALG/CH/ALG/CH) were more effective in inhibiting bacterial growth. This new coating for cellulosic fibers is a new strategy and may open new avenues for the development of antimicrobial polymers with potential application in health‐care field. Copyright © 2013 John Wiley & Sons, Ltd.     

Confinement and controlled release of quinine on chitosan–montmorillonite bionanocomposites

To accomplish the controlled‐release systems based on layered clay minerals, one of the best ways is to intercalate organic molecules into the interlayer gallery of clay minerals. Into a series of chitosan (CS) intercalated montmorillonite (MMT) nanocomposites, prepared via ion‐exchange route, antimalarial drug [quinine (QUI)] was loaded to act as effective drug delivery systems. Among the CS–MMT nanocomposites, higher drug adsorption with decreasing CS concentration was observed. CS–MMT and CS–MMT/QUI intercalated compounds were characterized by powder X‐ray diffraction, Fourier transform infrared spectroscopy, and thermal analysis. The synthesized nanocomposites, filled in the gelatin capsules followed by coating of Eudragit® L 100, were tested for in vitro drug release performance in the sequential buffer environments at 37 ± 0.5 °C. As no drug release (0%) was observed in the gastric fluid, the coating of Eudragit® L 100 to the capsules is highly adequate. However, the drug release rate was comparatively faster from the CS intercalated clay with compare with pure clay. The drug release kinetic data revealed that the release of QUI from the nanocomposites can be explained by modified Freundlich model. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Preparation of chitosan functionalized end‐capped Ag‐NPs and composited with Fe3O4‐NPs: Controlled release to pH‐responsive delivery of progesterone and antibacterial activity against pseudomonas aeruginosa (PAO‐1)

In this work, functionalized chitosan end‐capped Ag nanoparticles (NPs) and composited with Fe₃O₄‐NPs was prepared as pH‐responsive controlled release carrier for gastric‐specific drug delivery. The structure of prepared material was characterized by FE‐SEM, XRD, EDS and FT‐IR analysis. The loading behavior of the progesterone onto this novel material was studied in aqueous medium at 25°C and their release was followed spectrophotometrically at 37°C in seven different buffer solutions (pH 1.2, 2.2, 3.2, 4.2, 5.2, 6.2 and 7.2) to simulate intestine and gastric media which experimental results reveal more release rate in pH 1.2 (gastric medium) with respect to other buffers. This observation is attributed to dependency of the CS‐IMBDO‐Ag‐Fe₃O₄‐NPs and progesterone structure with buffer pH that candidate this new material as prospective pH‐sensitive carrier for gastric‐targeted drug delivery. On the other hand, the antibacterial properties of this material against gram‐negative bacterium pseudomonas aeruginosa (PAO‐1) in agar plates was studied and accordingly based on broth micro dilution the minimum bactericidal concentration (MBC) and minimum inhibitory concentration (MIC) with respect to standard CLSI in different concentrations of CS‐IMBDO‐Ag‐Fe₃O₄‐NPs was calculated. The results reveal that MIC and MBC values are 50 and 1250 μg/mL, respectively. In addition, extracts of Portulaca oleracea leaves was prepared and its antibacterial activity in single and binary system with CS‐IMBDO‐Ag‐Fe₃O₄‐NPs as synergies effect against PAO‐1 was tested and results shown that these materials have significant synergistic effect for each other.