N-取代苯甲酰基-N'-取代芳基硫脲的合成、晶体结构及生物活性

为了寻找新的高活性农药, 利用工业易得的三氟羧草醚及其中间体为起始原料, 设计合成了9个未见报道的N-取代苯甲酰基-N'-取代芳基硫脲化合物, 结构经IR, ¹H NMR, 元素分析确认. X射线衍射测定了化合物4b的晶体结构, 结果表明: 其分子属于三斜晶系, 空间群P-1, a＝0.51588(19) nm, b＝1.0766(4) nm, c＝2.0596(8) nm, α＝81.113(6)°, β＝89.702(6)°, γ＝78.131(6)°, V＝1.1056(7) nm³, D_c＝1.445 Mg/m³, Z＝2, F(000)＝492, μ＝0.319 mm^－1. 初步生物活性测试结果表明, 部分化合物具有较好的除草活性.     

Hβ分子筛催化的甲苯与乙酸酐(AA)酰化反应研究

以Hβ分子筛为催化剂，对甲苯与乙酸酐(AA)的酰化反应进行了研究。通过研究反应温度、压力、甲苯与乙酸酐(AA)摩尔比、催化剂用量、以及溶剂的种类和用量等因素对反应转化率和选择性的影响，确定了较优的反应条件。结果表明，Hβ分子筛对甲苯与乙酸酐(AA)酰化反应具有较好的催化活性和选择性，适宜的反应条件为：温度130 ℃、甲苯/乙酸酐(AA)摩尔比20、催化剂/乙酸酐(AA)重量比0.8，极性溶剂如硝基苯等对酰化反应有一定的促进作用，但选择性有所下将，而非极性溶剂如二氧化碳可部分抑制催化剂的失活。     

醋酸乙烯酯-马来酸酐共聚物与水解聚丙烯酰胺高分子络合物的研究

<正> 某些高分子在溶液中可以通过次价力形成高分子络合物.根据次价力的不同,可分为四类:聚电解质络合物、氢键络合物、立体络合物和电荷转移络合物.部分水解聚丙烯酰胺(简称HPAM)是在水悬浮体中被广泛使用的絮凝剂,醋酸乙烯酯-马来酸酐共聚物(简称VAMA)是一种能力很强的泥浆稀释剂.研究二者在水溶液中的相互作用,在理论上和应用上都有重要意义.我们曾研究了粘土对它们的吸附作用、改变泥浆流变性以     

Catalytic Hydrogen Transfer over Magnesia, xv. Preliminary Studies of Active Centers of Catalysts

Reduction of 7-tridecanone and 1-phenyl-1-hexanone by 2-propanol at 573-673 K in the presence of MgO has been studied. Acidic as well as strong and weak basic sites of MgO surface have been blocked in the reaction of the oxide with triethylamine, phenol or benzoic acid (1000 mol/g of catalyst), respectively. Retention of activity of MgO treated with triethylamine or phenol in ketones reduction by 2-propanol has been observed. Only residual activity of MgO poisoned by benzoic acid has been noted. The exclusive participation of moderate basic centers of MgO in catalytic reduction of ketones by 2-propanol has been ascertained.     

卡尔曼滤波紫外光度法同时测定饮料中苯甲酸及糖精的研究

在酸性条件下，用乙醚萃取、蒸干乙醚后，用ＮａＨＣＯ３溶解残渣，从复杂的样品中分离出苯甲酸和糖精，测定它们在２４５～２８１ｎｍ之间的紫外吸收，运用卡尔曼滤波算法计算两者的浓度，用新息序列监测干扰物质分离的程度。此法简化了许多分离手续，用于饮料分析，结果满意。     

Synthesis of chitosan resin possessing 3,4-diamino benzoic acid moiety for the collection/concentration of arsenic and selenium in water samples and their measurement by inductively coupled plasma-mass spectrometry

A chitosan resin functionalized with 3,4-diamino benzoic acid (CCTS-DBA resin) was newly synthesized by using a cross-linked chitosan (CCTS) as base material. The adsorption behavior of trace amounts of elements on the CCTS-DBA resin was examined by the pretreatment with a mini-column and measurement of the elements by inductively coupled plasma-Mass spectrometry (ICP-MS). Arsenic(V) could be retained on the CCTS-DBA resin at pH 3 as an oxoanion of H₂AsO₄⁻. Selenium(VI) is strongly adsorbed at pH 2 and pH 3 as an oxoanion of SeO₄²⁻, while selenium(IV) as HSeO₃⁻ is adsorbed on the resin at pH 3. The sorption capacities are 82, 64, and 88 mg g⁻¹resin for As(V), Se(IV), and Se(VI), respectively. The effect of common anions and cations on the adsorption of As(V), Se(IV), and Se(VI) were studied; there was no interference from such anionic matrices as chloride, sulfate, phosphate, and nitrate up to 20 ppm, as well as from such artificial river water matrices as Na, K, Mg, and Ca after passing samples through the mini-column containing the resin. The CCTS-DBA resin was applied to the collection of arsenic and selenium species in bottled drinking water, tap water, and river water.     

Synthesis of 2,3′-biindolyls and indolo[3,2-a]carbazoles

Several highly activated 2,3′-biindolyls were prepared from methyl 5,6-dimethoxyindole-2-carboxylate and oxindoles. The 2,3′-biindolyls were further transformed into a hydroxy indolo[3,2-a]carbazole and a bisindole amide.     

相转移催化氧化合成苯甲酸

苯甲酸一般由甲苯氧化而成 ,工业上采用液相空气氧化生产苯甲酸[1 ] 。ＫＭｎＯ4氧化甲苯制备苯甲酸的方法是在实验室中最常见的一种方法[2 ] ,该法的优点是反应条件温和 ,操作简便 ;其缺点是反应时间长 ,产率低 (低于 40 % ) [3] 。为了提高ＫＭｎＯ4氧化法的产率 ,本文采用十六烷基三丁基溴化磷 (ＨＤＴＢＰ)和苄基三乙基氯化铵(ＢＴＥＡ)作相转移催化剂氧化甲苯制备苯甲酸 ,具有时间短 ,收率高等优点。同时又考虑到ＨＤＴＢＰ的催化效果虽然好 ,但价格昂贵 ,因此本文采用价廉易得的苄基三乙基氯化铵 (ＢＴＥＡ)作相转移催化剂氧化甲苯制…     

4-二甲氨基吡啶催化合成含氟苯甲酸糖酯

以4－二甲氨基吡啶为催化剂由含氟苯甲酸与溴代乙酰糖催化酯化合成了4个新的含氟苯甲酸糖酯。其结构经IR，^1H NMR和MS确认，多数还作了^13C NMR测定。     

Improvement in the synthesis of metallophthalocyanines using microwave irradiation

A successful application of microwave irradiation, in which phthalocyanines were synthesized under solventless conditions from 1,2-phthalonitrile or phthalic anhydride and urea in the presence of metal templates is described. It was found that in comparison with conventional heating, the microwave process is a very useful alternative for cyclotetramerization processes because of reduction of the reaction time, better yield, and easy-to-perform procedure.