长余辉材料SrAl2O4 ∶ Eu,Dy中Eu的 价态变化及对发光性能的影响

采用高温固相法,先在空气气氛下制备了SrAl₂O₄ ∶ Eu,Dy,后对其进行还原→氧化→还原处理。X射线衍射结果表明,经过还原→氧化→还原处理后样品的晶体结构没有改变。样品的发射光谱测试表明,在高温空气气氛下有少量的Eu³⁺还原成Eu²⁺。Eu³⁺和Eu²⁺有不同的发光特性,Eu³⁺产生的是线状特征光谱,发射峰值在592,616 nm。Eu²⁺产生的是带状光谱,带的中心位置在513 nm。经过还原处理的样品和经过氧化处理的样品相比,Eu²⁺的浓度得到显著提高,而Eu³⁺的浓度则急剧下降。对Eu²⁺的氧化、Eu³⁺的还原的机理进行了细致地讨论。另外,样品的热释光谱测试表明,经过氧化气氛处理和经过还原气氛处理过的样品的热释光峰值有很大的变化,但陷阱能级深度基本不变,在0.65 eV左右。这表明,对长余辉材料SrAl₂O₄ ∶ Eu,Dy进行还原→氧化→还原处理,Eu离子价态和发光强度会产生变化,并不影响其中Dy离子的陷阱能级。     

一种新型红色荧光粉CaAl12O19： Eu,Mn的制备及发光性能

固相法制备了碱土金属铝酸盐荧光粉CaAl₁₂O₁₉ : Eu,Mn,测试了样品的XRD及激发与发射光谱,对样品的结构及其发光性能进行了分析,并且考察了灼烧温度及Eu³⁺的浓度对样品发光性能的影响,对Eu³⁺的作用机理进行了探讨。 该荧光粉能被波长短于550 nm的蓝绿光以及紫外和近紫外光激发,其发射光谱峰值在590,615,645,657 nm,其中前两个为Eu³⁺的特征发射,后两个为Mn⁴⁺的²E-⁴ A₂跃迁发射。该荧光粉的最佳烧结温度与时间分别为1 550 ℃和4 h,Eu³⁺的最佳掺杂摩尔分数为0.11%左右。     

Sol–gel preparation and photocatalytic performance of TiO2/SrAl2O4: Eu2+, Dy3+ toward the oxidation of gaseous benzene

It has been found that the photocatalytic activity of TiO₂ toward the decomposition of gaseous benzene can be greatly enhanced by loading TiO₂ on the surface of SrAl₂O₄: Eu²⁺, Dy³⁺ using sol–gel technology. The prepared photocatalyst was characterized by BET, XRD, and XPS analyses. XRD results reveal that the peaks of titania in either rutile or anatase form are not detected by XRD in the 2θ region from 20° to 50°. The binding energy values of Ti 2p of pure TiO₂ are 458.90 and 464.60 eV, while for TiO₂/SrAl₂O₄: Eu²⁺, Dy³⁺, the binding energy values of Ti 2p are 458.50 and 464.20 eV. The results indicate that the optimum loading of TiO₂ is 1 wt% and TiO₂/SrAl₂O₄: Eu²⁺, Dy³⁺ (1 wt%) demonstrates 1.4 times the photocatalytic activity of that of pure TiO₂, but the underlying mechanism of SrAl₂O₄: Eu²⁺, Dy³⁺ in the photocatalytic reaction remains to be unraveled.     

采用快速升温烧结方法生长Tl-1223超导薄膜的研究

报道了在铝酸镧(00l)衬底上生长Tl-1223超导薄膜的快速升温烧结方法以及铊(Tl)源陪烧靶的配比对Tl-1223薄膜晶体结构的影响.扫描电子显微镜观测表明,采用快速升温烧结方法生长的Tl-1223超导薄膜具有致密的晶体结构.X-射线衍射等测试表明,采用合适配比的陪烧靶在氩气环境下可以制备出纯c轴取向的Tl-1223超导薄膜,充氧退火后的薄膜具有较好的电学性能,其临界转变温度T_(c onset)达到116K,临界电流密度达到1.5MA/cm~2(77 K,0 T).实验结果表明,采用这一新的烧结方法制备Tl系超导薄膜具有升降温时间和恒温时间短、生产成本低等特点.     

CO2 reforming of methane over nickel catalysts supported on nanocrystalline MgAl2O4 with high surface area

In this paper dry reforming of methane (DRM) was carried out over nanocrystalline MgAl2O4-supported Ni catalysts with various Ni loadings. Nanocrystalline MgAl2O4 spinel with high specific surface area was synthesized by a co-precipitation method with the addition of pluronic P123 triblock copolymer as surfactant, and employed as catalyst support. The prepared samples were characterized by X-ray diffraction (XRD), N2 adsorption, H2 chemisorption, temperature-programmed reduction (TPR), temperature-programmed oxidation (TPO), temperature- programmed desorption (TPD) and transmission and scanning electron microscopies (TEM, SEM) techniques. The obtained results showed that the catalyst support has a nanocrystalline structure (crystal size: about 5 nm) with a high specific surface area (175 m2 g-1) and a mesoporous structure. Increasing in nickel content decreased the specific surface area and nickel dispersion. The prepared catalysts showed high catalytic activity and stability during the reaction. SEM analysis revealed that whisker type carbon deposited over the spent catalysts and increasing in nickel loading increased the amount of deposited carbon. The nickel catalyst with 7 wt% of nickel showed the highest catalytic activity.     

Determination of Gallium By Liquid-Liquid Extraction-Flame Atomic Absorption Spectrometry In Bayer Process Aluminate Solutions

Abstract

The described flame-atomic absorption determination of gallium involves the extraction of 8-hydroxyauinoline-Ga complex and the extraction of galhum as an ion association complex from strong hydrochloric acid into Methyl Isobutyl Ketone (MIBK). Both of the examined extraction systems were found to be workable for gallium determination in aqueous solutions. A comparison of mentioned extraction systems showed that only the second one can be applied for gallium determination in low concentration in aluminate solutions (strong alkaline). Finally, an analytical scheme for gallium determination in aluminate solutions is recommended (extraction of Ga from hydrochloric acid solutions, 3.0-50M, through matrix matched calibration curve). the proposed procedure was found to be simple, selective and accurate.     

烧结温度对蓝色长余辉材料Sr_2Al_6O_(11):Eu~(2+),Dy~(3+)发光性能的影响

采用传统的高温固相法合成了蓝色长余辉发光材料Sr_2Al_6O_(11)∶Eu~(2+),Dy~(3+),系统研究了烧结温度对Eu~(2+)和Dy~(3+)共掺杂蓝色铝酸锶长余辉材料物相及发光性能的影响.用X射线衍射仪对所合成的材料进行物相分析,用荧光分光光度计记录了样品的激发光谱和发射光谱,用亮度计记录其余辉衰减曲线.结果表明:随着烧结温度从1100 ℃升高到1300 ℃,材料的物相由富锶相逐渐向富铝相转变,其中1200 ℃条件下合成的样品主相为Sr_2Al_6O_(11);发射光谱首先发生蓝移,随后又发生红移,其中1200 ℃条件下合成的样品发射光谱峰值波长最短(468 nm);主相为Sr_2Al_6O_(11)的蓝色铝酸锶长余辉材料的余辉时间(≥1 mcd/m2)可达240 min以上.     

火焰原子吸收光谱法测定铝酸钠溶液中微量铷

采用空气－乙炔火焰原子吸收光谱法测定铝酸钠溶液中微量铷。对仪器工作条件、测定体系酸度、共存离子干扰等作了研究。方法用于氧化铝生产工艺中碳分、种分、蒸发母液及类似样品中微量铷的快速分析。方法准确度较高,结果重现性好。     

铝酸钠溶液的鲁米诺增强声致发光研究

Ultrasonic processing on sodium aluminate solutions was proved to have effects on the gibbsite crystallization process from sodium aluminate solution. In order to investigate the mechanism of the ultrasonic intensification, the sonofluorescence spectrum was detected by fluorescence spectrometer in sodium alumiante Luminol solutions, and the spectrum under the conditions of various ultrasonic power and different composition of sodium aluminate solutions were studied. It is found that the sodium aluminate Luminol solution can irradiate fluorescence by ultrasonic processing above the given power; the intensity of sonofluorescence are relatively low in sodium aluminate solutions with high concentration and low αk（mol ratio of Na2O/Al2O3 in sodium aluminate solution）. The relationship between the sonofluorenscence and ultrasonic intensification on gibbsite crystallization process from sodium aluminate solutions were also discussed. The conclusion that the ultrasonic effects are influenced by ultrasonic cavitation and intensity of sonofluorescence spectrum is deduced.     

溶剂浮选-气相色谱法测定铝酸钠溶液中的硬脂酸钠

用溶剂浮选-气相色谱法测定铝酸钠溶液中的硬脂酸钠。选择环己酮为浮选溶剂,样品经1∶1(V/V)的盐酸酸化后,以40 mL/m in的速度通入氮气并以环己酮为浮选溶剂浮选30 m in进行富集,用CH3OH/BF3在80℃水浴中加热3 m in进行甲酯化,以毛细管色谱柱PEG-20M(30 m×0.32 mm,i.d.)分离,邻苯二甲酸二乙酯为内标,氢火焰离子化检测器检测。方法在硬脂酸与内标的质量比在0.1~10范围内呈良好的线性关系(r=0.9997);硬脂酸钠的相对标准偏差为1.35%(n=7);回收率为96.9%~98.1%。