高性能锂离子电池正极黏合剂研究进展

正极黏合剂是维持锂离子电池正极结构稳定性的关键材料,对于锂离子电池的能量密度及安全性具有重要作用.本文综述了锂离子电池正极黏合剂材料的研究及应用进展,重点介绍了锂离子电池正极黏合剂对于正极材料及锂离子电池电化学性能的影响,详细总结了以聚偏氟乙烯(PVDF)、聚酰亚胺(PI)、功能性聚合物黏合剂为代表的油溶性黏合剂和以聚丙烯酸(PAA)、羧甲基纤维素(CMC)为代表的水溶性黏合剂的特点:PVDF具备良好的化学稳定性,黏合效果较好,但耐高温性能差且在电解液中易溶胀;PI的耐高温性能优异,机械性能较好,但成本相对较高;功能性聚合物黏合剂具备良好的导电性,可有效抑制Li-S锂电池中多硫化物的穿梭效应,但制备工艺复杂;PAA的柔性较好,抗高压能力较强,但是力学性能较差;CMC具有良好的分散性,机械强度较大,因脆性较大需与丁苯橡胶(SBR)配合使用.结合已有的研究报道,探讨了高性能锂离子电池先进正极黏合剂材料的未来发展方向及前景.     

Radiation-induced graft polymerization of acrylic acid onto fluorinated polymers. II. Graft copolymer–metal complexes obtained by radiation grafting onto poly(tetrafluoroethylene-ethylene) copolymer

A study has been made on the graft copolymers obtained by radiation-induced grafting of acrylic acid onto poly(tetrafluoroethylene-ethylene) (ET) films. The conversion of the graft copolymer into metal acrylate copolymer complex was carried out by treatment with different metal salts. Such a prepared graft copolymer–metal complex was confirmed by different methods: IR, UV spectrometry, degree of coloration, and x-ray fluorescence. Some selected properties of the graft copolymer–metal complexes such as electrical conductivity, swelling behavior, and mechanical properties were investigated. The influence of metal complexes in the graft copolymers was determined and compared with the grafted films. The possibility of the practical uses for such prepared graft copolymer–metal complexes was discussed and determined. It was assumed that such materials may be of great interest in the field of semiconducting materials in addition to their applicability as cation-exchange membranes. © 1993 John Wiley & Sons, Inc.     

CONFORMATIONAL CHARACTERISTICS OF POLY(ACRYLIC ACID) AND POLY(METHACRYLIC ACID)

A full-relaxation optimization of molecule and the Dreiding force field are employed toobtain the geometry parameters and the conformational energy surfaces of meso or racemicdyad of poly(acrylic acid) (PAA) and poly(methacrylic acid) (PMAA). Three differentcarbonyl-bond orientations of side-groups resulted in the differences in depth of potentialwells in their energetic contours for a meso or a racemic dyad. These discrepancies areinterpreted as a result of various fine structures corresponding to grid search conformationsas well as thereby different interactions. The analysis on the most stable conformationsof PMAA confirmed that the ester groups are nearly perpendicular to the plane definedby the two adjacent skeletal bonds but may possibly change their relative orientations tomeet the requirement of lower energy during the conformational state transition. For eachpolyme, two global energy maps of a meso and a racemic dyad were finally constructedfrom the superposition of energy data for the three kinds of side-group orientations by theBoltzmann factors. From an ensemble average, the proposed scheme with three rotationalisomeric states (RIS) allowed us to access the experimentally unperturbed dimensions ofPAA chain via the configurational statistical mechanics. Although the calculation wasbased on the short-range, local interactions, it was interested to note that the experimentalcharacteristic ratios just fell within the range calculated for atactic chains.     

N,N-二乙基丙烯酰胺与丙烯酸在聚丙烯薄膜表面光接枝制备二元接枝膜及其温度、pH值敏感特性研究

以二苯甲酮为引发剂,聚丙烯薄膜(CPP)为基材,通过紫外光接枝的方法制备了具有温度和pH值双重敏感特性的聚N,N-二乙基丙烯酰胺(PNDEA)与聚丙烯酸(PAA)二元接枝膜.在PNDEA一次接枝膜的制备过程中,引发剂与单体配比相同时,本体接枝方法的接枝速率在反应初期明显高于溶液接枝方法;采用溶液法时,增大引发剂与单体配比等可提高接枝率.用本体法所制得的PNDEA一次膜光活化接枝PAA时接枝速率较溶液法高,并且能够实现较高的PAA接枝率.用红外光谱(FTIR)、X射线光电子能谱化学分析(ESCA)对接枝层组成的表征结果证实了二元接枝层的存在.在不同温度下,PNDEA一次接枝膜的FTIR谱图中酰胺Ⅰ带特征吸收峰发生位移表明它具有温度敏感特性.用扫描电子显微镜(SEM)对PNDEA接枝层表征结果表明,用不同接枝手段所制备的接枝膜具有不同的表面形貌.通过吸水率测定研究了二元接枝膜的温度及pH值敏感特性.     

Electrochemical,spectroscopic, and thermal studies on interactions of linear poly(acrylic acid) with uranyl ions in aqueous solutions

The formation of complexes between linear poly(acrylic acid) (PAA) and uranyl ions in aqueous solutions was studied with conductometry, potentiometry, thermal analysis, Fourier transform infrared, and luminescence spectroscopy methods. The stoichiometry of the PAA/UO complex on repeating units of a PAA basis was determined to be 2:1. IR spectroscopy studies made on solid complexes showed that the carbonyl stretching absorption band of PAA was shifted to a higher wave number, and a new band at 1749 cm^?1 in the polycomplex spectrum was observed, confirming the existence of specific interactions between the carboxylate groups of PAA and metal ions. Luminescence spectroscopy studies showed an increase in the intensity of the uranyl‐ion emission spectra and new band formation at 483 nm, further confirming the interaction of UO ions with PAA in aqueous solutions. The thermal behavior of PAA/UO complexes further proved strong interactions in the complex structure. The thermal degradation of the polycomplexes included the main stages of destruction of both PAA and uranyl nitrate. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1610–1618, 2004     

Selective Oxidation of Propane by Lattice Oxygen of Vanadium-Phosphorous Oxide in a Pulse Reactor

Selective oxidation of propane by lattice oxygen of vanadium-phosphorus oxide (VPO) catalysts was investigated with a pulse reactor in which the oxidation of propane and the re-oxidation of catalyst were implemented alternately in the presence of water vapor. The principal products are acrylic acid (AA),acetic acid (HAc), and carbon oxides. In addition, small amounts of C1 and C2 hydrocarbons were also found, molar ratio of AA to HAc is 1.4-2.2. The active oxygen species are those adsorbed on catalyst surface firmly and/or bound to catalyst lattice, i.e. lattice oxygen; the selective oxidation of propane on VPO catalysts can be carried out in a circulating fluidized bed (CFB) riser reactor. For propane oxidation over VPO catalysts, the effects of reaction temperature in a pulse reactor were found almost the same as in a steady-state flow reactor. That is, as the reaction temperature increases, propane conversion and the amount of C1 C2 hydrocarbons in the product increase steadily, while selectivity to acrylic acid and to acetic acid increase prior to 350℃ then begin to drop at temperatures higher than 350℃, and yields of acrylic acid and of acetic acid attained maximum at about 400℃. The maximum yields of acrylic acid and of acetic acid for a single-pass are 7.50% and 4.59% respectively, with 38.2% propane conversion. When theamount of propane pulsed decreases or the amount of catalyst loaded increases, the conversion increases but the selectivity decreases. Increasing the flow rate of carrier gases causes the conversion pass through a minimum but selectivity and yields pass through a maximum. In a fixed bed reactor, it is hard to obtainhigh selectivity at a high reaction conversion due to the further degradation of acrylic acid and acetic acid even though propane was oxidized by the lattice oxygen. The catalytic performance can be improved inthe presence of excess propane. Propylene can be oxidized by lattice oxygen of VPO catalyst at 250℃, nevertheless, selectivity to AA and to HAc are even lower, much more acetic acid was produced (molar ratio of AA to HAc is 0.19:1-0.83:1) though the oxidation products are the same as from propane.     

Size effect of complexing microcapsules on copper ion extraction

In a previous work [J. Microencapsulation, in press], polyamide microcapsules containing a poly(acrylic acid) gel as a macromolecular ligand (PAA-CAPS) with a mean diameter of 210 μm were prepared using an original two-step polymerization process combining interfacial polycondensation and radical polymerization in a water in oil inverse emulsion system. Extractions of many divalent cations were examined. In this work, we proposed to synthesise by the same process, smaller microcapsules with a mean diameter of 10 μm (PAA-μCAPS). Reference polyamide microcapsules, i.e. without ligand were also synthesized (μCAPS) and (CAPS) [J. Microencapsulation, in press]. Microcapsule wall thickness was evaluated by SEM and TEM observations of microcapsule cross-section cuts, microcapsule water content was determined by thermogravimetric experiments. Specific surface area and total volume of the pore of microcapsules were determined by BET method based on N₂ adsorption/desorption. The comparison of the extractabilities and the stripping of Cu(II) into the various kind of microcapsules were examined.     

Comparison of the immunogold labeling of single light chains and whole immunoglobulins with anti-kappa on LR-white and epoxy sections

The purpose of this study was to examine the intensity of the immunogold labeling of kappa light chains as single molecules and as parts of whole immunoglobulin molecules in LR-White sections and epoxy sections both practically and theoretically. Human renal tissues including deposits of kappa light chains and immune complex deposits of IgA were embedded in both LR-White resin and epoxy resin. Immunogold labeling was performed on unetched thin sections of both resins with anti-κ or anti-IgA. In all relevant cases the immunolabeling was intense on the LR-White sections. Single kappa light chains were intensely labeled also on the epoxy sections, although not as intensely as on LR-White sections. In contrast, the immunogold labeling of whole immunoglobulins with anti-κ and anti-IgA was weak and hardly positive on the epoxy sections. Consequently, the quotient labeling_lr-white/labeling_epoxy for anti-κ was significantly lower for labeling of single light chains (3.6) than for labeling of whole immunoglobulins (15.9). The corresponding quotient for labeling of whole immunoglobulins with anti-IgA was 17.0. Supported by theoretical considerations, it is believed that the copolymerization between the epoxy resin and the antigens allows the knife to cleave the large whole immunoglobulins more easily than the smaller single kappa chains. This prevents satisfactory immunolabeling of whole immunoglobulins on epoxy sections whether anti-κ or anti-IgA is used as antibodies, while single kappa chains are easily immunolabeled.