Studies on the phase properties of lyotropic liquid crystals of Brij35/sodium oleate/oleic acid/water system:By means of polarizing microscope,SAXS,~2H-NMR and rheological methods

The pseudo-quaternary phase diagram of Brij35/sodium oleate/oleic acid/water systems has been investigated, and the liquid crystal area has been identified, which covers about two thirds of the whole phase diagram. The liquid crystal structure and behavior have been also studied by using polarizing texture, small angle X-ray scattering, 2H-NMR and rheometer etc. The result shows that when the composition of the system changes along the line of AA′ in this large liquid crystal region, the structural change is cubic→cubic/lamellar→lamellar→lamellar/hexagonal→hexagonal. Meanwhile, we made the first attempt of systematic study of the rheological properties of the above system. The lattice constants of cubic and hexagonal liquid crystals are 10.53 and 5.68 nm, respectively.     

Na＋-丙氨酸二肽络合离子结构的密度泛函理论研究

运用密度泛函理论B3LYP方法在6-311＋＋G**基组水平下研究了Na^＋与丙氨酸二肽(AD)分子结合形成的6种Na^＋-AD 络合离子, 其中包括2种双齿结构和4种单齿结构. 考察了6种Na^＋-AD络合离子的相对稳定性, 分析了丙氨酸二肽分子与Na^＋作用过程中分子骨架Ramachandran角f和Ψ以及分子内氢键的变化.     

胶原-单宁树脂的制备及其对水溶液中UO2+2的吸附特性研究

以天然牛皮为原料,经胃蛋白酶处理制得水解胶原;通过胶原-黑荆树单宁-醛反应制备了胶原-单宁树脂(C-TR)吸附材料,并表征了材料的形貌,测定了材料的比表面积、热变形温度等性质。系统研究了C-TR对水溶液中UO22 的吸附特性。结果表明,C-TR对UO22 有较强的吸附能力。当温度为303K、pH=5.0、UO22 的初始浓度2.5mmol.L-1时,吸附容量达到1.49mmolU/g。升高温度,平衡吸附量增大。pH对吸附容量的影响较大,适宜的pH范围为5.0-6.0。C-TR对UO22 的吸附平衡符合Freundlich方程。吸附动力学可用拟二级速度方程来描述。C-TR对UO22 的吸附基本不受NaCl影响,该吸附材料可望用于海水中铀的富集和分离。     

Do intramolecular halogen bonds exist? Ab initio calculations and crystal structures’ evidences

Cl···O intramolecular contacts are analysed here. Hence the Cambridge Structural Database (CSD) search was performed to find five-membered Cl–C=C–C=O pseudo-rings closed through Cl···O intramolecular contacts. Such rings were analysed and it was found that some of Cl···O distances are smaller than the corresponding sum of van der Waals radii. Additionally ab initio MP2/6-311++G(d,p) calculations and AIM analyses were carried out here on 3-chloropropenal and its fluoro derivatives to deepen the nature of intramolecular Cl···O interactions, some of findings may indicate that they are attractive and stabilizing ones. This paper is dedicated to Prof. T. M. Krygowski on the occasion of his 70th birthday     

Y_2O_3∶Eu~(3+)薄膜的制备及发光性能的研究

以稀土氧化物为原料,用溶胶-凝胶法制备前驱液,加入适量的聚乙烯醇做成膜物质,用浸渍拉提法在石英玻璃表面上得到均匀的薄膜,然后经过适当的干燥和热处理得到Y2O3∶Eu3+发光薄膜.讨论了Eu3+的掺杂浓度和热处理温度对薄膜发光性能的影响.试验表明:Eu3+的最佳掺杂浓度为8%(摩尔分数),薄膜的发光性能随热处理温度提高而增强,当热处理温度达到700℃后,薄膜的发光性能基本上稳定.同时用原子力显微镜和X射线衍射分析了薄膜的表面形貌和结构.     

Facile synthesis of 9-（N-amino-4-fluoromethyl-3-pyrrolidinyl）-2- fluoro-6-aminopurine from trans-4-hydroxy-L-proline

A novel and simple procedure for synthesis of azanucleoside by Mitsunobu reaction between N-(p-nitrobenzyloxycarbonyl)- trans-4-hydroxy-D-proline methyl ester obtained from trans-4-hydroxy-L-proline after six-step reaction and 2-fluoro-6-azidopurine is described,and azanucleoside is fluorinated by new fluridizer 2,2-difluoro-1,3-dimethylimidazolidine (DFI).All reactions could be carded out under mild condition.     

质谱技术研究儿茶素及儿茶素-锗多聚体特性

采用HPLC-ESI-Q-TOF和MALD I-TOF质谱技术分析儿茶素组成与结构,发现儿茶素中的表没食子儿茶素没食子酸酯(EGCG)具有多聚体特性。有机化学法合成EGCG-Ge4 化合物,并经HPLC进一步分离纯化。红外光谱和质谱技术分析并证实EGCG不仅能形成多聚体,而且还能络合金属锗(包括其他金属离子),成为EGCG-Ge4 和EGCG-Ge4 多聚体。EGCG-Ge4 抑制肺癌细胞生长速率明显高于EGCG,其提高幅度约为30%~40%左右。     

制备参数对高比表面积介孔催化剂La-Co-Zr-O结构与性能的影响

采用双表面活性剂模板(十六烷基三甲基溴化铵和聚乙二醇辛基苯基醚的混合物)分解法制备了不同原子比(n_La+n_Co)/(n_La+n_Co+n_Zr)和不同温度焙烧的系列介孔混合氧化物催化剂La-Co-Zr-O。运用XRD、N₂吸附/脱附、XPS和H₂-TPR等技术对催化剂进行了表征，并以CO和C₃H₈氧化为模型反应，考察了组分配比和焙烧温度等参数对催化剂催化性能的影响。比表面积和孔径测试结果表明，样品具有很高的比表面积(108～266 m²·g^-1)和分布集中的孔径(3.4～3.9 nm)，Zr含量较高的样品比表面积较大。XRD结果表明，样品中的活性组分钴物种主要以Co₃O₄形式存在；XPS和H₂-TPR结果表明，样品中可还原的晶格氧的数量、活动度以及表面钴原子浓度均与催化剂对CO和C₃H₈的氧化性能密切相关。原子比为0.5的样品中，较多的晶格氧易于在相对低温下还原；而原子比为0.7的样品表面钴原子浓度较高，这使得两样品均表现出较高的催化活性。经650 ℃焙烧的样品仍保持较高的比表面积(108 m²·g^-1)和分布集中的介孔孔径(最可几孔径约3.8 nm)，且催化活性下降幅度也很小，表明该系列介孔催化剂具有优良的抗烧结能力和介孔热稳定性。     

喷雾热解法合成球形(Y,Gd)BO3:Eu荧光粉的研究

采用喷雾热解法合成了无团聚的球形(Y,Gd)BO3∶Eu荧光粉。研究了各因素对(Y,Gd)BO3∶Eu荧光粉体的结晶性能、外观形貌及发光强度的影响。结果表明,按120%硼酸的化学计量比于900℃喷雾热解,再经过1200℃后处理2 h,可以合成结晶良好的(Y,Gd)BO3∶Eu荧光粉体;喷雾热解溶液的浓度和载气流量对荧光粉的外观形貌影响较大;铕含量为10%时可以获得最佳的发光强度。在优化喷雾热解实验条件下成功合成出良好发光强度的PDP用(Y0.6Gd0.3)BO3∶Eu0.1荧光粉。     

Multilayered Cu–Ti deposition on silicon substrates for chemiresistor applications

Abstract

On the perspective to develop CuO–TiO₂ MOS, multilayered Cu and Ti thin layers were alternatively deposited on silicon wafers using 25?keV Ar?+?ion beam sputtering and, subsequently, oxidized by thermal annealing in air at 400?°C for 24?h. The deposited films have variable ratios of the Cu and Ti % at. One of the main goal is to obtain such multilayers avoiding the presence of Cu–Ti–O compounds. The samples were characterized in terms of composition (by RBS and SIMS analyses) and morphology (by AFM and SEM investigations). In particular, SIMS maps allows to observe the spatial distribution and thickness of each phase of the Cu/Ti multilayers, and further to observe Cu diffusion and mixing with Ti, as well as phase separation of CuO and TiO₂ in the samples. The reasons of this effect represent an open issue that has to investigated, in order to improve the MOS fabrication.