Elaboration and characterisation of a plasticized cellulose triacetate membrane containing trioctylphosphine oxyde (TOPO): Application to the transport of uranium and molybdenum ions

A cellulose triacetate (CTA) membrane containing trioctylphosphine oxyde (TOPO) as carrier and 2-nitrophenyloctyl ether (NPOE) as a plasticizer was prepared. The membrane CTA + NPOE + TOPO was characterised using chemical techniques as well as Fourier Transform InfraRed (FTIR) spectroscopy, X-ray diffraction and Scanning Electron Microscopy (SEM). The CTA membrane is characterised by well-defined pores; these pores are completely filled with the NPOE and carrier. Surfaces of membranes with TOPO are smooth. The systems constituted by the mixture of CTA + NPOE, CTA + NPOE + TOPO do not give any diffraction. This can be due to the absence of crystallization within the membrane. On the other hand, this result should be attributable to the amorphous state of the structure, which permits us to eliminate the mechanism of transfer of the ions by electron jump. A comparative study of transport across a polymer inclusion membrane (PIM) and a supported liquid membrane (SLM) containing the same carrier in chloroform has shown that uranium or molybdenum transport efficiency was increased using PIM instead of SLM. PIM showed higher stability than SLM, the flux of transport remain constant in the former case after 2 weeks.     

流动注射分光光度法测定煤灰中的微量铀

在稀硝酸介质中,以2-(3-羧基苯偶氮)-7-(4-氯-2-膦酸基苯偶氮)-1,8-二羟基-3,6-萘二磺酸(CPA-mK)作为显色剂,建立了一种测定微量铀的流动注射分光光度法,在最佳实验条件下,该方法的线性范围为0-35mg/L,检出限为0.026mg/L,应用该方法测定煤灰样品中的铀,其相对标准偏差为1.8%-3....     

Surgénérateurs ; l'état des matériaux aux hautes irradiations, hautes puissances locales et températures, leurs gradients et propriétés mécaniques adaptées aux contraintes qui en résultent

The motivations to realize nuclear breeder reactors are developed in the present context of a strong growth in electronuclear power stations in many countries, using mostly moderated and water cooled reactors.The past studies can be of a substantial profit in France and, to a lesser degree, in other countries of the EU. However, to use fully the 238 uranium isotope, the materials for these breeders must withstand much harder radiation than those for water reactors. The power densities and thermal gradients will also be much more intense. The mechanical stresses, both static and dynamic, will be large and will act on materials with altered mechanical properties. Fuel elements will have to be produced with materials already irradiated several times and therefore showing such alterations.A field of studies concerning materials and their mechanical behavior in new and severe conditions is sketched here, both in construction and working conditions, together with proposed necessary instrumentation and research orientations.     

Radon activity and exhalation rates measurements in fly ash from a thermal power plant

Radon exhalation rate from fly ash samples and from the homogeneous mixture of fly ash of different proportions additive in soil and cement samples to study the effect of the addition was measured by cup dosimeter using SSNTDs. Radon activities were found to vary from (1018±38) to ( whereas the radon exhalation rate varied from (366±14) to . A gradual increase has been observed in samples having fly ash as an additive in cement samples whereas a gradual decrease was observed in soil samples after the addition of fly ash. ²³⁸U in fly ash was measured by a low-level NaI (Tl)-based gamma ray spectrometer. The results show enhancement in U concentration in fly ash as compared to coal samples, whereas radon exhalation rate is less in fly ash samples.     

A comparative study of indoor radon level measurements in the dwellings of Punjab and Himachal Pradesh, India

The LR-115 type-II plastic track detector has been used for measuring the indoor radon levels in the dwellings of some villages of Punjab and Himachal Pradesh. In Punjab, the villages surveyed are Rampura Phul, Lehra Mahabat and Pitho (villages in Bathinda district), and Amritsar city. The average indoor radon levels in these areas are found to vary from 64 to 152 Bq/m³, which are quite within the safe limits recommended by International Commission on Radiological Protection (Ann. ICRP 23(2)). The indoor radon levels have also been measured in the dwellings of Hamirpur district of Himachal Pradesh. The villages surveyed in this area are Nukhel, Badarn, Galore-Khas, Har-Upper, Tikker Brahamana and Awah-Lower where radon concentration has been found to vary from 261 to 724 Bq/m³. These values are higher than the recommended limit.     

Electronic structure of layered uranium compounds from photoemission spectroscopy

We present the photoemission results of two layered tetragonal compounds, the anti-ferromagnet UAsSe and ferromagnet USb₂. We observed intriguing electronic structure for both UAsSe and USb₂, in which relatively dispersive and narrow 5f bands are present. In the vicinity of the Fermi edge we found a very sharp photoemission peak with dispersion of several meV along the Γ to Z direction of the Brillouin zone. We also found a broader, hybridized f-character band with dispersion of several hundred meV along the Γ to X direction. Narrow and dispersive bands in these U-based magnetic materials are reminiscent of band magnetism as previously found in some transition metals.     

Two Uranyl Complexes with Pyromellitic Acid. A Heterometallic Complex with U=O–CuII Interaction

Two uranyl complexes based on pyromellitic acid were hydrothermally synthesized, and their X‐ray single‐crystal diffraction structures were determined. Complex [UO₂(Hbtec)]^–(Himd)⁺ · H₂O ( 1 ) (H₄btec = pyromellitic acid, imd = imidazole), is an ionic complex, which shows a typical (4, 4) topological structure in the space. A heterometallic complex, UO₂Cu(btec)(phen) ( 2 ) (phen = 1,10‐phenanthroline) results from the reaction of uranyl nitrate and copper(II) bromide with pyromellitic acid. The structure of complex 2 revealed that the chains of UO₇ and CuO₃N₂ units were connected to each other through the carboxyl groups and U=O–Cu interactions to create a two‐dimensional framework.     

激光烧蚀-多接收电感耦合等离子体质谱测定铀颗粒物中铀全同位素比值

建立了铀颗粒物中铀全同位素比值的分析方法,采用双面胶带装载铀颗粒物样品,优化激光烧蚀-多接收电感耦合等离子体质谱的运行参数,用标准样品交叉法校正质量分馏和探测器检测效率,测定了粒径几十微米的铀标准物质CRM124-1、GBW04234和GBW04238中铀全同位素比值.本方法对铀颗粒物中235U/238U、234 U/235U和236 U/235U测量的相对实验标准不确定度分别小于0.050％,1.7％和1.8％,测量结果与参考值在不确定度范围内符合.研究表明,本方法可快速、准确、高精度地测定铀颗粒物中铀全同位素比值.     

Heterometallic zinc uranium oxyfluorides incorporating imidazole ligands

Two heterometallic uranium oxyfluorides with hybrid networks were hydrothermally synthesized by incorporating two imidazoles, 1-(biphenyl-4-yl)-1H-imidazole(bpi) and 1,4-di(1H-imidazol-1-yl)benzene(dib), formulated as Zn(bpi)2(UO2)2(H2O)F6(1) and Zn(dib)(UO2)F4 0.5H2O(2). Compound 1consists of chains of edge-sharing UO2F5 and UO2F4(H2O) pentagonal bipyramids, which are linked by Zn(bpi)2moieties to form the sheet structure with decorated bpi. While in compound 2, sheets of edgesharing dimers of UO2F5 pentagonal bipyramids and Zn F3N2 polyhedra are linked by dib, creating a pillared three-dimensional framework. The two compounds represent the few examples of heterometallic uranium oxyfluorides incorporating organic ligands. The syntheses, structure as well as the IR spectra, UV–vis spectra and luminescent properties of the bimetallic uranium oxyfluorides are studied.     

龙门山地区水系沉积物中铀含量分布特征

铀元素是具有毒性和放射性的锕系元素之一,对区域环境和人体健康具有极大的危害,开展铀元素污染评价具有重要的现实意义。以龙门山地区主要水系为主要研究对象,采集了大量的水系沉积物样品,对该地区的铀元素分布特征进行了研究。研究表明,大渡河水系沉积物中铀平均质量分数为5.50 mg/kg,绵远河水系沉积物中的铀平均质量分数为3.07 mg/kg,其余河流水系沉积物中铀含量均较低。通过龙门山地区水系沉积物中铀元素分布特征与龙门山地区矿产分布对比发现,煤矿、磷矿开发区是水系主要铀元素来源。