聚酯在超临界甲醇中的降解特性

研究在间歇高压反应器中聚对苯二甲酸乙二醇酯(PET)、聚对苯二甲酸丁二醇酯(PBT)及聚碳酸酯(PC)在超临界甲醇中的降解反应;通过建立聚酯在超临界甲醇中的降解反应模型,探讨了聚酯在甲醇中降解的机理。结果表明:PET、PBT和PC在甲醇溶液中的降解具有共性,均可分为超临界区、非临界区和中间过渡区三个区域。在超临界区聚酯完全溶于甲醇并降解为原料单体,且对苯二甲酸二甲酯(DMT)和碳酸二甲酯(DMC)的收率均大于90%;聚酯的降解是在聚合物分子链的无规断裂和聚酯进行酯交换反应的双重作用下发生的。     

MORPHOLOGY OF A THERMOTROPIC AROMATIC POLYESTER

The crystalline morphology of a thermotropic aromatic polyester has been studied by microscopy techniques. Spherulites with ringed structure under polarizing micioscope were observed for solution cast specimens, They were composed of radially growing crystalline lamellae of thickness around 100. It was found that the molecules were packed in the thickness direction. Banded texture was observed in randomly packed domains for melt cast specimens. The bands have the same width and internal structure as those usually observed in oriented specimens of these polymers obtained by shearing their mesomorphic melt.     

Thermoanalytical study of nucleating effects in polypropylene composites

Nucleating and transcrystallization behaviour of additives in engineering PP composites and the effect of modified interfacial structure is the subject of this series of papers. The first part concentrates on polypropylene/liquid crystalline polyester blends. Increased crystallisation temperature and degree of crystallinity of polypropylene is characteristic to the blends containing different amount of LCP additive. Transcrystallization process governs the formation of crystalline structure in these systems in course of isothermal crystallisation at 132C. The nucleating effect of LCP gives rise to more uniform crystalline structure in the polypropylene phase.The financial support of the OTKA 014194 is acknowledged with gratitude.     

Synthesis and properties of new polyesters having tetrahydrofuran rings in their main chains

New polyesters 6a–6c consisting of 2,4-linked tetrahydrofuran rings were synthesized by bulk polycondensation of methyl trans- and cis-4-hydroxytetrahydrofuran-2-carboxylates ( 5a and 5b ) and a stereoisomeric mixture of methyl 4-hydroxy-5-methyltetrahydrofuran-2-carboxylate ( 5c ) at high temperature. These monomers were prepared from methyl glycolate or methyl lactate and diethyl maleate through a four-step reaction sequence. The polycondensation was carried out without solvent at different temperatures ranging from 150 to 220°C. Titanium isopropoxide was most effective among the catalysts examined, giving polyesters with number-average molecular weights up to 2 × 10⁴. Polyester 6a consisting of trans-2,4-linked tetrahydrofuran rings was soluble in trifluoroacetic acid and a mixed solvent of chloroform and methanol (10/1, v/v). Polyester 6b composed of cis-2,4-linked tetrahydrofuran rings was soluble in dimethyl sulfoxide and dimethylformamide in addition to the two solvents for 6a . Polyester 6c with 5-methyl-substituted tetrahydrofuran rings was composed of a mixture of stereoisomeric units and thus was soluble in a variety of solvents including chloroform, tetrahydrofuran, acetonitrile, dimethyl sulfoxide, and dimethylformamide. The glass transition temperatures of 6a, 6b , and 6c determined by DSC were 109, 88, and 66°C. These polyesters were found to be very slowly hydrolyzed in a neutral phosphate buffer solution at ambient temperature. © 1993 John Wiley & Sons, Inc.     

Poly(methylene sebacate): Synthesis and characterization

The synthesis of poly(methylene sebacate) was carried out via the reaction of cesium sebacate with bromochloromethane in N-methylpyrrolidone over a range of temperatures (55–130°C). A number of polymers having limiting viscosity numbers in the range of 0.29–0.94 dL g^?1 (CHCl₃; 25°C) were characterized by elemental analyses, ¹H- and ¹³C-NMR, DSC, and GPC techniques. The polymerization was found to be very rapid at 100°C, being complete in ca. 15 min. and was relatively insensitive to the stoichiometric ratio of the monomers. As high molecular weight polymers were produced without the quantitative conversion of the reactants, the polymerization is considered to be occurring by an interfacial mechanism.     

Bismuth-catalyzed allylic oxidation using t-butyl hydroperoxide

Bismuth(III) salts are efficient catalysts for the selective allylic oxidation using tert-butyl hydroperoxide. BiCl₃ is especially effective and can be easily recovered and reused as BiOCl. Using BiCl₃/K-10 as catalyst, an increase in the reaction rate was observed.     

Biocatalytic synthesis of polymers. III. Formation of a high molecular weight polyester through limitation of hydrolysis by enzyme-bound water and through equilibrium control

Enzyme-catalyzed preparation of polymers offers several potentially valuable advantages over the usual polymerization procedures and has been studied for several years. A significant limitation on the polyesters prepared to date has been the low molecular weights achieved. The present studies have established that, in the polycondensation of bis(2,2,2-trifluoroethyl) glutarate with 1,4-butanediol using porcine pancreatic lipase as the catalyst, this limitation arises from at least two sources: hydrolysis of activated ester end groups by water introduced along with the enzyme and the polymerization's reaching equilibrium despite using the poorly nucleophilic 2,2,2-trifluoroethanol as the leaving group. Evidence is also developed that the presence of trifluoroethanol accelerates the release of the enzyme-bound water which hydrolyzes the activated ester end groups. The hydrolysis could be avoided by choosing a relatively high-boiling solvent, such as bis(2-ethoxyethyl) ether, then removing the trifluoroethanol by placing the reaction mixture under vacuum periodically or by drying the enzyme rigorously. The vacuum method also removed the limitation on molecular weight resulting from the reaction's reaching equilibrium. A further improvement in the molecular weight to nearly 40,000 daltons, well within the range that is technically interesting, was achieved by using 1,2-dimethoxybenzene or 1,3-dimethoxybenzene as the polymerization solvent. © 1995 John Wiley & Sons, Inc.     

废旧聚酯（PET）的化学循环利用

废旧PET 聚酯可通过化学解聚来实现其循环利用。本文总结了废旧PET 聚酯化学循环利用领域的研究现状, 介绍了目前国内外开发的主要化学解聚工艺方法, 包括水解法、甲醇解聚法、乙二醇解聚法等, 同时对各种工艺过程的优缺点进行了综合比较。     

Development in the area of UV-crosslinkable solvent-based pressure-sensitive adhesives with excellent shrinkage resistance

Solvent-based UV-crosslinkable pressure-sensitive adhesives (PSA) present a new class of products that offers the potential to produce a novel generation of ultraviolet cured self-adhesive products with excellent shrinkage resistance. A variety of solvent-based pressure-sensitive adhesives were prepared by synthesis in ethyl acetate with solid content on 50 wt.% with 2-ethylhexyl acrylate, methyl acrylate, acrylic acid, N-vinyl caprolactam and unsaturated photoinitiators: 4-acryloyloxy benzophenone, allyl benzoine and phenyl-(1-acryloyloxy)-cyclohexyl ketone. The main emphasis is given to the influence of viscosity and molecular mass of synthesized adhesive on their shrinkage. Further trials show the effect of the UV-crosslinking process with UV-lamp and comparison with acrylics PSA crosslinked with metal chelates aluminium acetylacetonate and titanium acetylacetonate on shrinkage. Further examinations describe the influence of various factors such as UV exposure time and UV dose on very relevant PSA performance such as shrinkage on coated PVC carrier.     

New unsaturated polyesters as injectable drug carriers

New unsaturated polyesters of poly(fumaric acid-glycol-sebacic acid) copolymers and poly(maleic anhydride-glycol-sebacic acid) copolymers were prepared by melt polycondensation of the corresponding mixed monomers: sebacic anhydride, fumaric acid or maleic anhydride and glycol. Methyl-methacrylate (MMA) was used as crosslinker and dimer acid was used as thinner.In vitro studies showed that those copolymers are degradable in phosphate buffer at 37 °C and poly(fumaric acid-glycol-sebacic acid) has proper drug release rate as drug carriers. The biocompatibility of poly(fumaric acid-glycol-sebacic acid) copolymers under mice skin was also evaluated; macroscopic observation and microscopic analysis demonstrated that the copolymer is biocompatible and well tolerated in vivo. The injected poly(fumaric acid-glycol-sebacic acid) [molar ratio M_{fumaric acid}:M_glycol:M_{sebacic acid} = 1.75:2.20:0.25] containing 5% adriamycin hydrochloride (ADM) in the mice bearing Sarcoma-180 tumor exhibited a good antitumor efficacy. The volume doubling time (VDT) (18 ± 2.5 days) of the tumor growth by this treatment was longer than that (7 ± 0.9 days) by the subcutaneous injection of ADM.