激光与材料参数对瞬态SBS 诱导的激光超声破坏效果的影响

 通过数值求解一维瞬态受激布里渊散射（SBS）声光耦合波方程，从理论上分析了泵浦激光参数及光学材料参数对SBS过程发生阈值的影响。以SBS过程中建立起来的应力场抗拉（压）强度和散射场的反射率为判据，分析了激光脉宽及作用区域长度对激光超声破坏材料效果的影响，探讨了短脉冲激光（约ns）引起的激光超声对材料的破坏机理；讨论了通过参数配置有效遏制SBS过程激光超声对光学材料的破坏问题。     

类比方法与光的本性的探索

简要回顾了人类对光的本性的探索历程，介绍了物理学家在研究过程中对类比方法的运用。     

邻苯二甲酸二丁酯对雌二醇与血清组分结合的影响

利用紫外分光光度法测定了邻苯二甲酸二丁酯 (DBP)、雌二醇 (E2 )与血清组分 3种物质间两两结合的二元体系和三元体系结合常数。结果表明 ,DBP、血清组分和 E2 三者之间能两两结合 ,其中以 E2 与血清组分的结合能力最强。当三者处于同一体系中 ,随着 DBP浓度的增加 ,E2 与血清组分 - DBP二元体系间的结合常数也逐渐增加 ,其最大值高出正常 E2 与血清组分结合常数 (7.5 4× 10 4mol-1· L )近一个数量级。这表明 ,DBP的存在可能不会与 E2 对血清组分进行竞争结合 ,但由于本身的结合特点 ,会减少血液中游离E2 的含量 ,从而影响细胞内雌激素的平衡     

几种常见光源特性的研究

本通过大学物理实验中常用光源特性的分析，说明了实验中光源使用的合理性。     

Constructing Solutions of an Ill-Posed Nonlinear Singularly Perturbed Problem for an Equation of Elliptic Type

Mathematical Notes -     

儿童的铅中毒问题──Ⅱ．彩色油墨中铅的测定

用能量色散Ｘ射线荧光分析法测定了某厂生产的４４种彩色油墨纸中的铅含量．结果发现，除５种油墨外，其它３９种彩色油墨纸中的铅含量均比对照纸中高９倍以上，其中桔黄色、桔红色树脂胶版油墨高５００倍以上，棕色树脂胶版油墨高３７９倍，深黄色和柠檬黄色树脂铅印油墨分别高１７０和１１３倍．这表明，彩色油墨印刷品可能是儿童慢性铅中毒的重要污染源．     

C++QED: an object-oriented framework for wave-function simulations of cavity QED systems

We present a framework for efficiently performing Monte Carlo wave-function simulations in cavity QED with moving particles. It relies heavily on the object-oriented programming paradigm as realised in C++, and is extensible and applicable for simulating open interacting qua ntum dynamics in general. The user is provided with a number of “elements”, e.g. pumped moving particles, pumped lossy cavity modes, and various interactions to compose complex interacting systems, which contain several particles moving in electromagnetic fields of various configurations, and perform wave-function simulations on such systems. A number of tools are provided to facilitate the implementation of new elements.     

副品红共振光散射法测定脱氧核糖核酸

本文基于脱氧核糖核酸 (DNA)对有机染料副品红的共振光散射的增强效应 ,拟定了一种测定DNA的共振光散射法。在pH =0 5～ 1 5范围内 ,有机染料副品红于 35 5nm处的共振光散射强度被DNA强烈增强 ,且增强程度与DNA浓度呈线性关系 ,线性范围为 0 10～ 15 μg·mL- 1 ,检出限可达 36ng·mL- 1 。该方法简便、快速、具有较高的灵敏度和准确度 ,且线性范围较宽。将该方法用于混合样品中DNA的测定 ,结果令人满意。     

Synthesis and characterization of white‐light‐emitting polyfluorenes containing orange phosphorescent moieties in the side chain

Two orange phosphorescent iridium complex monomers, 9‐hexyl‐9‐(iridium (III)bis(2‐(4′‐fluorophenyl)‐4‐phenylquinoline‐N,C^2′)(tetradecanedionate‐11,13))‐2,7‐dibromofluorene (Br‐PIr) and 9‐hexyl‐9‐(iridium(III)bis(2‐(4′‐fluorophenyl)‐4‐methylquinoline‐N,C^2′)(tetradecanedionate‐11,13))‐2,7‐dibromofluorene (Br‐MIr), were successfully synthesized. The Suzuki polycondensation of 2,7‐bis(trimethylene boronate)‐9,9‐dioctylfluorene with 2,7‐dibromo‐9,9‐dioctylfluorene and Br‐PIr or Br‐MIr afforded two series of copolymers, PIrPFs and MIrPFs, in good yields, in which the concentrations of the phosphorescent moieties were kept small (0.5–3 mol % feed ratio) to realize incomplete energy transfer. The photoluminescence (PL) of the copolymers showed blue‐ and orange‐emission peaks. A white‐light‐emitting diode with a configuration of indium tin oxide/poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate)/PIr05PF (0.5 mol % feed ratio of Br‐PIr)/Ca/Al exhibited a luminous efficiency of 4.49 cd/A and a power efficiency of 2.35 lm/W at 6.0 V with Commission Internationale de L'Eclairage (CIE) coordinates of (0.46, 0.33). The CIE coordinates were improved to (0.34, 0.33) when copolymer MIr10PF (1.0 mol % feed ratio of Br‐MIr) was employed as the white‐emissive layer. The strong orange emission in the electroluminescence spectra in comparison with PL for these kinds of polymers was attributed to the additional contribution of charge trapping in the phosphorescent dopants. © 2007 Wiley Periodicals, Inc. JPolym Sci Part A: Polym Chem 45: 1746–1757, 2007     

SYNTHESIS OF LIGHT OLEFINS FROM SYNGAS VIA DIMETHYLETHR——A NEW TECHNIQUE PROCESS

A new route named as SDTO method for the synthesis of lightolefins from syngas has been proposed.That is to convert syngas todimethylether and then to convert dimethylether to light olefins.The catalystsfor the two conversion reactions have been developed.For the first reaction,the catulySt was synthesized by the combination of methanol synthesis catalystwith γ-Al_2O_3or zeolites which possesses both metallic and acidic functions.Thecatalyst for the second reaction was modified SAPO-34 molecular sieve.Thevariables of the reactions have also been investigated.The results from theserial connection of the two conversion steps without any separation show thatthe yield of C_2~-C_4~- olefins Could be>100g/(m~3 syngas).