紫外可调谐辐射的波长自动跟踪研究

脉冲染料激光器的可见光波段辐射通过共线倍频和非共线混频实现紫外波段的连续可调谐输出.本文报道了一种闭环跟踪方法;在调谐起始波长处,将取样光束在垂直相位匹配方向分割成等光强的两部分,然后在波长调谐时比较和平衡这两部分光强.对该方法在理论上作了分析并在实验中得到成功的验证.获得的自动跟踪效率大于90%.     

Structural and spectroscopic studies of silylated cyclo- and bicyclosilanes

A number of cyclo-and bicyclosilanes have been prepared and structurally characterized by X-ray crystallography and Raman spectroscopy. 1,1,4,4- and 1,1,3,3-tetrakis(trimethylsilyl)octamethylcyclohexasilanes were found to exhibit unusual twist- and twisted boat-conformations. The UV absorption properties of all compounds were studied and found to show absorption maxima red shifted compared to the parent compound dodecamethylcyclohexasilane. Dedicated to Prof. Mitsuo Kira on the occasion of his reception of the Wacker Silicon Award 2005 and in recongnition of his numerous outstanding achievements in organosilicon chemistry.     

Lightness Change as Perceived in Relation to the Size of Recognized Visual Space of Illumination

According to the concept of the recognized visual space of illumination (RVSI) the lightness of an object surface is perceived in relation to its conceptualized size. To prove this proposition the lightness of gray test patches was judged when they were located at various positions inside an illuminated space composed of two rooms in the depth direction from a subject. No retinal image arrangement was changed in the test patch and its immediate surroundings, but the front room had walls, floors and furniture lower in lightness by the amount of N1.5 than the back room to make the RVSI of the former smaller despite the illuminance in the entire space being the same. The results showed that the apparent lightness of the patches was perceived higher by amount of about 13 in L units for the N4 test patch and about 20 for N6 when the patches were located in the front room, in accordance with the prediction. It was stressed that the experiment of lightness judgment should be conducted in a three dimensional space rather than two dimensional plane as done by several investigators.     

Synthesis and characterization of poly(ethylene oxide‐co‐ethylene carbonate) macromonomers and their use in the preparation of crosslinked polymer electrolytes

Methacrylate‐functionalized poly(ethylene oxide‐co‐ethylene carbonate) macromonomers were prepared in two steps by the anionic ring‐opening polymerization of ethylene carbonate at 180 °C, with potassium methoxide as the initiator, followed by the reaction of the terminal hydroxyl groups of the polymers with methacryloyl chloride. The molecular weight of the polymer went through a maximum after approximately 45 min of polymerization, and the content of ethylene carbonate units in the polymer decreased with the reaction time. A polymer having a number‐average molecular weight of 2650 g mol^?1 and an ethylene carbonate content of 28 mol % was selected and used to prepare a macromonomer, which was subsequently polymerized by UV irradiation in the presence of different concentrations of lithium bis(trifluoromethanesulfonyl)imide salt. The resulting self‐supportive crosslinked polymer electrolyte membranes reached ionic conductivities of 6.3 × 10^?6 S cm^?1 at 20 °C. The coordination of the lithium ions by both the ether and carbonate oxygens in the polymer structure was indicated by Fourier transform infrared spectroscopy. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2195–2205, 2006     

Thermochemically induced binding of methyl orange to polycations containing primary amine groups

The thermochemical transformation of electrostatically formed complexes of methyl orange (MO) with polycations containing primary amine groups such as ammonium salts afforded new polymers with a high concentration of covalently bound 4‐N,N‐dimethylaminoazobenzene groups in the side chain. Poly(allylamine hydrochloride) and poly(β‐aminoethylene acrylamide hydrochloride) were employed as support polycations for MO. The transformation of sulfonate–ammonium ion pairs into sulfonamide bonds, via heating at an elevated temperature, was supported by the polymer properties before and after the thermal treatment. The polymer structure changes were monitored with elemental analysis, Fourier transform infrared, ¹H NMR, and ultraviolet–visible absorption spectroscopy, and thermogravimetric analysis. The spacer length between the backbone and azobenzene structures used as side chains strongly influenced the polymer properties before and after the heat‐induced reaction. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5898–5908, 2006     

红外光谱法研究含CeSt3的LDPE膜紫外光氧降解

报道了硬脂酸铈（ＣｅＳｔ_３）、及其在各种浓度、或不同温度、或延长贮放时间下含ＣｅＳｔ_３的低密度聚乙烯（ＬＤＰＥ）膜紫外光氧化降解过程的红外光谱。结果表明，只要在ＬＤＰＥ膜中加入０．１ｗｔ＋％～０．３ｗｔ＋％ＣｅＳｔ_３光敏剂，即可控光降解ＬＤＰＥ膜的寿命。     

低密度聚乙烯光引发交联机理——Ⅱ.BNB自旋捕捉ESR研究

在光引发剂二苯甲酮(BP)存在下,紫外光辐照低密度聚乙烯(LDPE)所形成的自由基中间体已被自旋捕捉剂2,4,6-三特丁基亚硝基苯(BNB)所捕捉,其自旋加合物自由基已为电子自旋共振(ESR)所特征。现已检测和鉴定到二种自旋加合物:一种是叔碳自由基;另一种是仲碳自由基。它们分别是由BP的激发三重态从LDPE链的支化点和亚甲基团上夺氢所形成的自由基中间体同自旋捕捉剂BNB反应生成的。上述的证据表明:LDPE的光引发交联点主要发生在叔碳和仲碳原子上,且H-型交联点占主导地位。     

羧基苯偶氮基杯[6]芳烃衍生物的合成及表征

近几年,随着对主客体化学研究的深入,杯芳烃的功能化修饰成为该领域的研究热点[1-6]。本文以邻、间、对氨基苯甲酸和杯[6]芳烃为原料,经重氮化 偶联反应合成了新型有色邻、间、对羧基苯偶氮基杯[6]芳烃,产物的结构经IR,1HNMR和元素分析表征;并研究了它们生色原理和光谱性能。结果表明它们是一类新型指示剂和具有新型配位空腔的主体分子。合成路线如下:图1　邻、间、对羧基苯偶氮基杯[6]芳烃的合成Fig.1　Fig1:Synthesisofp (o,m,p carboxylbenzeneazo)calix[6]arenes1　实验部分1 1　仪器与试剂Nicolet 460型傅里叶红外光谱仪(KBr…     

石英芯片电泳分离检测尿中蛋白的研究

通过对缓冲体系、缓冲液浓度、酸度、乳酸钙浓度、乙胺浓度、电泳电压和进样时间的优化选择，用石英芯片电泳一紫外检测法分离了纯人白蛋白和人运铁蛋白；在75mmol／L硼酸盐（pH10．55）（含0．8mmol／L乳酸钙、1％（φ）乙胺）运行缓冲液中，上述两组分在3min内完全分离；纯人白蛋白和人运铁蛋白的线性范围分别为1．0～15．0g/L和1．0～10．0g／L；检出限（S／N=3）均为0．5g／L，应用于临床尿蛋白分离测定，并与Helena琼脂糖凝胶电泳仪电泳结果进行比较，获得一致结果。     

Synthesis, spectroscopic and thermal studies of the copper(II) aspartame chloride complex

Aspartame adduct of copper(II) chloride Cu(Asp)₂Cl₂·2H₂O (Asp=aspartame) is synthesized and characterized by elemental analysis, FT IR, UV/vis, ESR spectroscopies, TG, DTG, DTA measurements and molecular mechanics calculations. Aqueous solution of the green solid absorbs strongly at 774 and 367 nm. According to the FT IR spectra, the aspartame moiety coordinates to the copper(II) ion via its carboxylate ends, whereas the ammonium terminal groups give rise to hydrogen bonding network with the water, the chloride ions or neighboring carboxylate groups. The results suggest tetragonally distorted octahedral environment of the copper ions.