Wittig-Olefinierung zu neuen donor- und akzeptor-substituierten 3-Vinylindolen: Optimierte Syntheseverfahren

Summary The optimized Wittig reaction of selectively functionalized 3-acylindoles yield new, and for Diels-Alder reactions highly reactive donor- and acceptor substituted 3-vinylindoles, respectively.

     

中空纤维催化膜反应器中环戊二烯的选择加氢反应

将聚乙烯吡咯烷酮（ＰＶＰ）负载钯催化剂（ＰＶＰ－Ｐｄ）镶嵌到三种醋酸纤维（ＣＡ）中空膜（ＣＡ－Ｉ，ＣＡ－Ⅱ，ＣＡ－Ⅲ）内制各中空纤维催化膜，并进一步制成催化膜反应器，在４０℃和０．１ＭＰａ的反应条件下，在催化膜反应器中进行了环戊二烯的选择加氢反应，考察了具有不同氢气渗透率的醋酸纤维丝组成的三种膜反应器对反应的转化率及选择性的影响，并在此基础上考察了各种反应参数对反应的影响，ＣＡ中空纤维催化膜对环戊     

丙烯选择氧化铋钼铁复氧化物催化剂组成,结构及性能的研究

采用XRD、Raman、XPS及催化剂性能评价等手段,考察了Bi_3(FeO_4)(MoO_4)_2和Fe_2(MoO_4)_3分别存在及两者共存时对Bi-Mo复氧化物体系催化性能的影响.结果表明,这两种含Fe物种的存在都有助于改善Bi-Mo系复氧化物催化剂对丙烯选择氧化反应的催化性能.但两者在作用机理上有所不同.Fe_2(MoO_4)_3本身无催化活性,但在反应条件下可部分还原为FeMoO_4形成Fe~(3+)/Fe~(2+)氧化还原对;且其地结构上与α-Bi_2(MoO_4)_3相匹配,这些因素都有助于促进催化体系中电子和氧物种的传递及催化剂表面活性中心的再生,从而提高催化性能.Bi_3(FeO_4)(MoO_4)_2在反应条件下也可形成Fe~(3+)/Fe~(2+)氧化还原对,但由于其Fe~(3-)所处的化学环境与Fe_2(MoO_4)_3很不相同,且Fe的含量也不及Fe_2(MoO_4)_3,因此它在促进催化体系中电子和氧物种的传递及催化剂表面活性中心的再生等方面的性能较差,但它对提高催化剂表面的活性中心(Bi-Mo对)数目有贡献.     

氟代碳核苷类化合物的合成研究──N－烷基－5－甲酰胺基－1，2，4－氧杂二唑基－3－（4＇－脱氧－4＇－氟－β－L－吡喃型阿拉伯糖）的合成

报道了Ｎ－烷基５－甲酰胺基－１，２，４－氧杂二唑基－３－β－Ｄ－吡喃木糖用二乙胺基三氟化硫选择性氟化，得到相应的Ｎ－烷基－５－甲酰胺基－１，２，４－氧杂二唑基－３－（４＇－脱氧－４＇－氟－β－Ｌ－吡喃型阿拉伯糖）；并用光谱分析确证了它们的构型及在溶液中的构象。     

烯丙基碘和锡与醛的选择加成反应

含活性基团的醛可与烯丙碘和锡粉直接进行亲核加成反应，得到高烯丙基的醇，水的存在不利于此反应的进行，与烯丙基溴相比，烯丙基碘反应活性更强，可在短时间内得较高的产率。     

Au/CeO2/Y和Au-MFe2O4催化剂用于有氧条件下CH4还原NOx的研究

以CeO2／Y分子筛和MFe2O4(M=Ni,Co，Zn)为载体，制备Au／CeO2／Y和Au-MFe2O4负载型金催化剂．用CH4做还原剂，考察了它们在有氧条件下催化还原NOχ的活性．结果表明：在Au-Y中引人助剂Ce，使得Au／CeO2／Y的催化活性高于Au／Y；Au-CoFe2O4的催化活性高于Au-Fe2O3，反应温度为300℃时，NOχ在Au-CoFe2O4上的转化率达到39．70%．     

Selective alkylation and Suzuki coupling as an efficient strategy for introducing functional anchors to the ethylene-bis(indenyl) ligand

Chiral ansa-ethylene-bis(indenyl)-metal complexes, EBI-MX₂, are useful pre-catalysts for a wide variety of reactions, including hydrogenations, hydrosilylations, and polymerization reactions. In order to immobilize these complexes onto heterogeneous supports, a new methodology was developed to introduce functional anchors to the ethylene-bis(indenyl) ligand, EBI. This was accomplished by selective alkylation of indene to form toluene-4-sulfonic acid 2-(3H-inden-1-yl)-ethyl ester, which was then used to alkylate 6-bromoindene. The selective introduction of an aryl bromide then undergoes coupling reactions with aryl borates via the Suzuki coupling to efficiently introduce an alkenyl or alcohol, functional anchor in a simple four step synthesis.     

Selective cleavage of acetals with ZnBr2 in dichloromethane

A selective cleavage of acetals of 1,2- and 1,3-diols has been achieved under mild conditions using ZnBr₂ in dichloromethane at room temperature. Acetal types cleavable by this procedure include benzylidene, isopropylidene and cyclohexylidene acetals. This method is compatible with several other types of hydroxyl protecting groups such as Bn, Bz, TBDPS, TIPS and TBDMS.     

An ion-imprinted silica-supported organic-inorganic hybrid sorbent prepared by a surface imprinting technique combined with a polysaccharide incorporated sol-gel process for selective separation of cadmium(II) from aqueous solution

Ion-imprinting concept and polysaccharide incorporated sol-gel process were applied to the preparation of a new silica-supported organic-inorganic hybrid sorbent for selective separation of Cd(II) from aqueous solution. In the prepared shell/core composite sorbent, covalently surface coating on the supporting silica gel was achieved by using a Cd(II)-imprinting sol-gel process starting from an inorganic precursor, γ-glycidoxypropyltrimethoxysiloxane (GPTMS), and a functional biopolymer, chitosan (CS). The sorbent was prepared through self-hydrolysis of GPTMS, self-condensation and co-condensation of silanol groups (Si-OH) from siloxane and silica gel surface, in combination with in situ covalent cross-linking of CS with partial amine shielded by Cd(II) complexation. Extraction of the imprinting molecules left a predetermined arrangement of ligands and tailored binding pockets for Cd(II). The prepared sorbent was characterized by using X-ray energy dispersion spectroscopy (EDX), X-ray diffraction (XRD), and scanning electron microscopy (SEM). Batch experiments were conducted to study the sorption performance by removal of Cd(II) when present singly or in binary system, an aqueous Cd(II) and Zn(II) mixture. The ion-imprinted composite sorbent offered a fast kinetics for the sorption of Cd(II) and the maximum capacity was 1.14 mmol g⁻¹. The uptake capacity of the imprinted sorbent and the selectivity coefficient were much higher than that of the non-imprinted sorbent. The imprinted sorbent exhibited high reusability. The prepared functional sorbent was shown to be promising for the preconcentration of cadmium in environmental and biological samples.