偶合反应化学发光法测定痕量银的研究

本将Ａｇ（Ⅰ）催化Ｓ２Ｏ＾２－８氧化Ｍｎ（Ⅱ）生成ＭｎＯ＾－４的催化反应与ＬｕｍｉｎｏｌＭｎＯ＾－４－ＯＨ＾－的化学发光反应相偶合，建立起一种新的灵敏测定痕量银的化学发光分析法，在所研究的优化条件下，该法测定银的选择性较好，检测限达到３．２×１０＾－１２ｇ／ｍＬＡｇ线性浓度范围为１．０×１０＾－１１－１．０×１０＾－５ｇ／ｍＬＡｇ，用于水样分析，结果较为满意。     

CoTPP电化学催化原溴代环己烷的机理

以电化学循环伏安、现场ＥＳＲ电化学以及现场薄层电化学方法研究了电生Ｃｏ（Ｉ）ＴＰＰ与溴代五己烷的反机制。在ＤＭＦ中，Ｃｏ（Ⅱ）／Ｃｏ（Ⅰ）的氧化还原有明显的催化溴代环己烷还原的特片，反现场有自由基生成，反应产物之一是Ｃｏ－Ｃ键化合物，可以在１．３０Ｖ（ＳＣＥ）－电子还原，当存在ＣＨ２－ＣＨＣＮ时，。生成另一种Ｃｏ－Ｃ键化合物，该化合物在－１．１０Ｖ（ＳＣＥ）处一电子还原，证明溴代环己烷与Ｃｏ（Ｉ）     

含羟基芳基或氨基芳基的磷酰胺酯衍生物的合成

采用均相反应的方法合成了6个含羟基芳基或氨基芳基的磷酰胺酯衍生物:[(ClCH_2CH_2)_2NP(O)(OPh)(XArY)](X:O,NH;Y:m或p-OH或NH_2).用元素分析、红外光谱、氢核磁共振谱及质谱证实了它们的组成及结构.     

On-line enzymatic reaction,extraction, and chromatography of fatty acids and triglycerides with supercritical carbon dioxide

Supercritical carbon dioxide can be utilized both as an introduction solvent in capillary SFC and as a reaction medium; both possibilities are illustrated in this study. An off-line SFE unit was modified for on-line SFE-SFC. To facilitate rapid depressurization of the extraction cell and to prevent memory effects, a 6-port valve was installed at the outlet line of the extraction unit. An increased background signal was obtained when PEEK polymer was used in the construction of the extraction vessel; when stainless steel was used, the blanks improved. The synthesis of methyl esters and butyl esters of fatty acids from triglycerides in edible fat was examined using an immobilized lipase as a catalyst in on-line SFE-SFC. As a result of 30 minutes reaction – extraction time, high yields of fatty acid esters were obtained at a pressure of 150 bar and a temperature of 50°C.     

The Use of Adiabatic Calorimetry for the Process Analysis and Safety Evaluation in Free Radical Polymerization

Adiabatic calorimetry is a technique that has been introduced as an important approach to hazard evaluation of exothermically reactive systems. In this paper the free radical polymerization of methyl methacrylate (MMA) has been studied. One of the most important aspects of MMA polymerization is its exothermicity and autoaccelerating behaviour, these characteristics can generate the occurrence of a runaway reaction.In a runaway situation the reacting system is close to adiabatic behaviour because it is unable to eliminate the heat that is being generated. An even worse situation can be reproduced in the laboratory with the Phi-Tec pseudo-adiabatic calorimeter. Process design parameters that are usually calculated from thermodynamic data or using semiempirical rules, such as adiabatic temperature rise or maximum attainable pressure, can be directly determined.The existence of the ceiling temperature has been experimentally demonstrated.This revised version was published online in November 2005 with corrections to the Cover Date.     

Ring-closing olefin metathesis on ruthenium carbene complexes: model DFT study of stereochemistry

Ring-closing metathesis (RCM) is the key step in a recently reported synthesis of salicylihalamide and related model compounds. Experimentally, the stereochemistry of the resulting cycloolefin (cis/trans) depends strongly on the substituents that are present in the diene substrate. To gain insight into the factors that govern the observed stereochemistry, density functional theory (DFT) calculations have been carried out for a simplified dichloro(2-propylidene)(imidazole-2-ylidene)ruthenium catalyst I, as well as for the real catalyst II with two mesityl substituents on the imidazole ring. Four model substrates are considered, which are closely related to the systems studied experimentally, and in each case, two pathways A and B are possible since the RCM reaction can be initiated by coordination of either of the two diene double bonds to the metal center. The first metathesis yields a carbene intermediate, which can then undergo a second metathesis by ring closure, metallacycle formation, and metallacycle cleavage to give the final cycloolefin complex. According to the DFT calculations, the stereochemistry is always determined in the second metathesis reaction, but the rate-determining step may be different for different catalysts, substrates, and pathways. The ancillary N-heterocyclic carbene ligand lies in the Ru-Cl-Cl plane in the simplified catalyst I, but is perpendicular to it in the real catalyst II, and this affects the relative energies of the relevant intermediates and transition states. Likewise, the introduction of methyl substituents in the diene substrates influences these relative energies appreciably. Good agreement with the experimentally observed stereochemistry is only found when using the real catalyst II and the largest model substrates in the DFT calculations.     

聚碳酸亚丙酯对聚(β-羟基丁酸酯-β-羟基戊酸酯)结晶行为的影响

用FTIR和DSC研究了PHBV及其与聚碳酸亚丙酯(PPC)熔融共混样的熔融结晶行为和等温结晶动力学.结果表明,PHBV与PPC熔融共混过程中发生了酯交换反应,两组分间存在一定的相互作用.PPC虽然能降低PHBV结晶折迭链的表面自由能,但同时也能够降低PHBV的结晶度、球晶径向生长速率、平衡熔点和结晶能力.     

OH自由基与CO反应的研究

用时间分辨-傅立叶变换红外发射光谱法研究了OH自由基与CO的反应.OH自由基由248 nm的激光光解硝酸得到.在实验中首次观测到了产物CO2的非对称伸缩振动(ν3)的激发态.对CO2发射光谱的拟合结果显示,其振动态的布居在量子数v=2时最大 ,而最高振动量子数达到v=6.由实验得到的CO2振动布居与Schatz等人用全量子化计算该反应的中间物HOCO解离动力学得到的CO2布居结果能很好地吻合.     

INTRAPARTICLE DIFFUSION EFFECTS IN FISCHER-TROPSCH SYNTHESIS Ⅰ. MODELING OF DIFFUSION AND REACTION

IntroductionCatal}ticrcactionsaffcctcdb}'diffosionaIlimitationincatal}'stporcshavcbccnextensive1}dcaltx`ithinlit.rat.rcll~5I.Scvcraltcchniqucsonthcspccialcase0fFischcr-Tropschs}'nthcsis(FTS)t\crcapplicdtocxplorcthebchaviorofthiscatal}ticrcactionundercxpcrimcntalandopcrationaIconditionsI3~5l.It`"ouldbeofvaluctoindicatchcrcthatthcseinvcstigationsx"ercmainl}'bascdonthesimplcstkineticsofthcfirstordcrinH2proposedbyAndersonl6]attheearIystages.However-thesetboents,striCtlyspeaking,areinvalidfor…