不同添加物和制备方式对Al2O3热稳定性的影响

通过水溶液成胶和丙三醇络事助成胶制备了不同的结构的γ－Ａｌ２Ｏ３,研究了Ｌａ,Ｓｉ,Ｂａ以及Ｌａ,Ｓｉ和Ｌａ,Ｂａ双组分改性对它们结构热稳定的作用,讨论了改性元素的引入方式及硅铝比的影响。结果表明,丙三醇络合助成胶能明显提高Ａｌ２Ｏ３的比表面积和孔径,并能显著改善Ａｌ２Ｏ３的热稳定性。     

Prediction of the net retention volumes in gas chromatography using porous polymers coated with different stationary phases

Summary A new expression which permits the prediction of the net retention volumes in gas chromatography with column packings of coated porous polymers is reported. The porous polymers Chromosorb 101 and Chromosorb 102 were used as supports and squalane, Ethofat and Carbowax 20M as stationary phases at three different column temperatures of 80°C, 100°C and 150°C. Several organic compounds of various polarity were used as test compounds and the net retention volumes, V_Ntheor, have been calculated according to this new expression. The V_Ntheor values were compared with the experimental net retention volumes, V_Nexp, and it was found that the difference between these two values is dependent on the type of compound and column packing. Nevertheless, the elution order could be predicted in most cases.     

气相[（SiO2）nX]^—团簇产生机理

利用ＸｅＣｌ准分子激光烧蚀多种硅氧多孔结构材料，在负离子通道测得丰富的「（ＳｉＯ２）ｎＸ」＾－负离子团簇，并讨论了多孔网结构和表面活性基团的分布对激光能量的吸收，传输及团簇产生的重要作用。     

Reactions of Hydroxyazolidines with π-Donor Heterocycles. 3. Reaction of 1-Acetyl-5-hydroxypyrazolidines with Oxindoles

The reaction of oxindoles with 5-hydroxypyrazolidines on the surface of potassium fluoride-modified alumina leads to 3-(5-pyrazolidinyl)oxindoles. The structure of these products was studied.     

纳米有序体系的模板合成及其应用

评述了以含有高密度的纳米柱形孔道的Al₂O₃膜和有机聚合物膜为模板,制备金属、合金、氧化物、半导体和聚合物及其复合组份的一维纳米结构有序阵列的几种方法、纳米结构的性质和应用的研究进展。可用于模板合成的方法有电化学沉积法、化学镀、化学聚合、化学气相沉积和溶胶-凝胶法等。取决于孔壁和所填充材料的化学性质,所得阵列既可以是由纳米管也可以是由纳米线组成。这样的有序阵列在光学、磁学、催化及电化学等领域有着重要的应用前景。制备新型复合纳米结构有序阵列、开展纳米器件的研制是模板合成研究领域的重要方向。     

The spatial distribution of poly(methyloctylsiloxane) deposited by solvent evaporation in the pores of HPLC silica particles

Summary Poly(methyloctylsiloxane) (PMOS), sorbed into the pores of HPLC silica particles by solvent evaporation, can function as a useful stationary phase for reversed-phase chromatography. The present work addresses the question of how the PMOS is distributed in the pores. Measurements of the surface area (BET, N₂) of a series of partially loaded samples (0–40% PMOS, m/m) using a typical batch of HPLC silica (10 μm irregular particles with 6 nm pores) show that the specific surface area of the samples decreases linearly with the specific loading (mass of PMOS per gram of silica). This result is not consistent with a “film” model in which the PMOS is deposited uniformly on the pore walls, but is consistent with a model in which long segmented “plugs” of PMOS are deposited within the pore system. Presented at the 21^st ISC held in Stuttgart, Germany, 15^th–20^th September, 1996     

Al2O3／WO3／ZrO2固体强酸催化剂对正丁烷异构化的催化性能

 通过沉淀、回流、浸渍和焙烧等步骤制备了Al2O3／WO3／ZrO2固体强酸催化剂．采用XRD，N2吸附，UV－Vis光谱，NH3－TPD和H2－TPR等技术测定了Al2O3对WO3／ZrO2催化剂的结构、表面酸性、氧化还原性及正丁烷异构化反应性能的影响．结果表明，在WO3／ZrO2中引入适量的Al2O3对其表面酸强度及酸量无显著影响，但可使催化剂中的ZrO2组分以稳定的四方相形式存在，并能有效地抑制催化剂中WO3的聚集长大，从而提高催化剂的稳定性和正丁烷异构化的转化率和选择性．添加铂于Al2O3／WO3／ZrO2中可进一步提高其催化性能．还考察了催化剂的焙烧温度、Al含量、反应温度和反应气氛对正丁烷异构化反应的影响．     

Cu－Zn／γ－Al2O3催化剂的制备及其在选择加氢反应中的催化性能

 通过浸渍法制备了不同Cu／Zn比的γ－Al2O3和改性γ－Al2O3负载的Cu－Zn催化剂，并用XRD，XPS和SEM等手段对催化剂进行了表征．XRD表征结果表明，还原活化前催化剂中的Cu和Zn分别以CuO和ZnO的形式存在；还原活化后Cu以单质的形式存在；催化剂失活后，单质Cu又转变成CuO．XPS和SEM分析结果表明，催化剂中金属的价态及颗粒的形貌在反应前后发生了变化．所制备的催化剂在糠醛加氢制糠醇反应中表现出较高的选择性．用Co改性的γ－Al2O3负载的Cu－Zn催化剂不仅具有较高的催化活性和选择性，而且还呈现出较长的寿命．催化剂中的Cu晶相是催化活性中心；催化剂中的Cu晶相转变成CuO和烧结是催化剂失活 的主要原因．     

Analysis of PCB by on-line coupled HPLC-HRGC

Summary On-line coupled HPLC-GC has been used for the fractionation and analysis of polychlorobiphenyls (PCB) according to their planarity. HPLC elution with porous graphitic carbon (PGC) as stationary phase, enables fractionation of PCB into classes according to the amount ofortho-substitution, which is related to congener toxicity. This is a preliminary step before GC analysis, which enables complete separation of PCB congeners according to vapour pressure. Conditions for HPLC-HRGC coupling were optimised, in particular the appropriate proper HPLC solvent was selected, because it determines eluent strength and selectivity and the transfer conditions. Different solvent were studied—n-hexane, dichloromethane, benzene, toluene, and their mixtures. Samples containing PCB standards and the commercial mixtures Aroclor 1242 and 1254 were analysed. Dichloromethane-n-hexane, 1:1, was selected as mobile phase for separation of poly-ortho from mono-ortho PCB; benzene-dichloromethane 30:70 resulted in the best separation of the most retained non-ortho-substituted PCB. Under these conditions the co-solvent trapping procedure, performed by adding 4% ethylbenzene as co-solvent, was used as transfer technique to overcome the drawback of losses of volatile congeners. Appropriate analysis conditions were successfully used to fractionate the technical PCB formulations Aroclor 1242 and 1254.     

Chemical environment of copper at the surface of a CuAl2 model alloy: XPS,MEIS and TEM analyses

Air‐formed oxide on a CuAl₂ model alloy is shown to be free of copper species, with copper enriching in the alloy. With thickening of the oxide by anodizing, copper enriches further to a critical concentration at which its oxidation proceeds with incorporation of Cu(II) species into the film. Such species migrate more rapidly through the film than aluminium species. Incorporation of copper species is associated with generation of oxygen gas within the film and subsequent film rupture is due to release of the gas. Reduction of Cu(II) to Cu(I) species during XPS analysis is characterized and the accelerating role of charge neutralizing is highlighted. Copyright © 2004 John Wiley & Sons, Ltd.