含有五边形—七边形缺陷的单壁纳米碳管的输运性质研究

运用第一性原理的密度泛函理论结合非平衡格林函数研究了含有五边形—七边形拓扑缺陷的纳米碳管异质结的输运性质.结果发现：拓扑缺陷对碳管的输运性质有很大影响；另外，不同类型的碳管形成的异质结的输运性质也有明显的差异. 关键词： 纳米碳管 输运性质 异质结 透射系数     

有限长扶手椅形单壁碳纳米管分子静电势的理论研究

在混合密度泛函B3LYP理论下,用3-21G基函数对有限长扶手椅形单壁碳纳米管(4,4)、(5,5)和(6,6)的构型进行优化和分子静电势计算.结果表明:除近核区域为正常的正电势外,碳纳米管结构模型的管内和管外为负电势区域;在碳纳米管结构模型的管内,管心处均出现负电势的最小值,且负电势的绝对值随着碳纳米管的曲率降低而增大,管心轴线上静电势的变化随碳纳米管的曲率降低而减少,带电粒子流比较容易通过纳米管.     

REM树脂的制备及亲核加成应用研究

用Mitsunobu反应及丙烯酰氯酰化反应制备了用于固相有机合成的载体REM树脂，将REM树脂与苄胺加成，考查了所合成REM树脂的反应性能，并通过元素分析测定氮含量，推出REM树脂的烯丙基固载量。利用所合成的REM树脂进行了与胺、酚的加成反应动力学研究。结果表明，REM树脂与脂肪族伯胺和促胺的加成反应能够进行，与苯胺不发生反应；REM树脂与酚不能发生亲核加成反应。     

Electrochemical and Spectroscopic Studies on the Interaction of Malachite Green with DNA and Its Application

The interaction of malachite green (MG) with double‐stranded DNA (dsDNA) in pH 7.0 Britton–Robinson (B–R) buffer solution was investigated by electrochemical and spectrophotometric methods. Within the potential scan range of ?1.0 to +1.5 V (vs. SCE), MG has two oxidative peaks at 0.547 V and 0.833 V and one reductive peak at 0.362 V on cyclic voltammogram at the scan rate of 0.20 V/s. After the addition of dsDNA into the MG solution, the oxidative peak current at 0.547 V decreases obviously. The electrochemical parameters, such as the charge transfer coefficient (α), the surface reaction rate constant (k_s) and the diffusion coefficient (D), were calculated and compared between in the absence and presence of dsDNA. The results show that these parameters of MG after adding dsDNA have greatly changed, which indicates that an electrochemical active complex was formed. The interaction mechanisms of MG with dsDNA are discussed in some details from the electrochemistry and UV‐vis spectrophotometry. The reduction of the peak current of MG after adding dsDNA was further used for the quantification of dsDNA by differential pulse voltammetry (DPV). The linear range for dsDNA is in the range of 10.0–100.0 μg/mL with the linear regression equation as Δi_p (μA)=0.065+0.0096 C (μg/mL) and the detection limit of 6.0 μg/mL (3σ). The influences of coexisting substances were investigated and artificial samples were determined with satisfactory results.     

Kinetic studies of antimony and selenium atomization processes including a chemical modifier during their determination by electrothermal atomic absorption spectrometry

We have studied antimony and selenium atomization processes including a chemical matrix modifier (palladium-containing activated carbon) during their determination by electrothermal atomic absorption spectrometry. We have developed and fine-tuned an experimental setup for determining the kinetic characteristics (activation energy and frequency factor) for element atomization processes from measurements in the initial section of the analytical signal. We provide a rationale for the most likely mechanism for the interactions that occur. The results of the kinetic studies of the atomization processes showed that the modifier we developed was highly effective, as a result of formation of a thermally stable condensed system C-Pd-A (where A is the analyte). __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 73, No. 4, pp. 530–534, July–August, 2006.     

接枝羧基的有限长碳纳米管电子结构的第一性原理研究

基于局域密度泛函理论，采用第一性原理方法，建立了对(5,5)型和(9,0)型有限长碳纳米管接枝羧基官能团的原子模型，通过计算其电子分布和态密度的变化，讨论羧基官能团对碳纳米管电子结构和电子输运特性的影响. 计算表明，接枝羧基的碳纳米管,其电子结构明显改变，其费米能级上的电子态密度下降；最高占据轨道上的非定域程度减弱,致使电子输运性能呈下降趋势. 关键词： 碳纳米管 密度泛函理论 电子结构     

Solubility of carbon dioxide in aqueous solutions of sodium chloride: Experimental results and correlation

The solubility of carbon dioxide in aqueous solutions of sodium chloride was measured in the temperature range from 40 to 160°C, up to 6 mol-kg salt solutions and total pressures up to 10 MPa. Pitzer's⁽¹⁾ equations as well as the Chen and Evans⁽²⁾ model were used to correlate the new data. Results are reported and compared to literature data and correlations.     

含氰基的酚醛树脂及其碳纤维复合材料

含氰基的酚醛树脂，具有优异的耐高温性能和高温下的机械强度，在３１５℃下性能变化甚小；不着火，发烟量低，有良好的加工成型性能。热固化过程中氰基成三嗪环而交联，没有小分子脱出，是一类具有广泛发展前景的新型热固性树脂。     

Production of carbon soot with a high content of C60 and C70 fullerenes by electric arc

The effect of the parameters of the electric arc (helium pressure, current and voltage, clearance between electrodes) and of the peculiarities of the setup design (arrangement of electrodes, distance between the arc and the cooling surface, temperature of the soot condensation surface) on the yield of fullerenes has been studied. Conditions for producing soot with a C₆₀ and C₇₀ content up to 43% (toluene extract) have been found.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 805–809, May, 1994.The authors are grateful to N. G. Spitsyna and A. V. Dubovitskii for the determination of the content of C₆₀ and C₇₀ fullerenes in the extract.The work was financially supported by the Russian Foundation for Basic Research (Project 93-03-18705).     

Interaction of carbon dioxide with ditoluenetitanium

The interaction of ditoluenetitanium with CO{in2} has been studied. Based on hydrolysis, thermolysis, and IR spectral data, the conclusion is drawn that a low-valent titanium oxalate is formed.This study was financially supported by the Russian Foundation for Basic Research (Project No. 93-03-5538).Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2241–2242, December, 1994.