Ni与钇稳定的氧化锆(111)表面相互作用以及界面活性的第一性原理研究

采用基于密度泛函理论的第一性原理方法, 系统研究了Ni原子在钇稳定的氧化锆(YSZ)(111)和富氧的YSZ(YSZ+O)(111)表面不同位置的吸附, 以及CO和O₂分子在Ni₁(单个镍原子)/YSZ和Ni₁/YSZ+O表面吸附的几何与电子结构特征. 结果表明: 1) 单个Ni原子倾向于吸附在O原子周围, 几乎不吸附在Y原子周围, 且Ni原子在氧空位上吸附最稳定; 2)和YSZ相比, 单个Ni原子在YSZ+O表面易发生氧化现象, Ni原子失去1.06 e电子, 被氧化成了Ni⁺, 吸附能力更强; 3)被氧化的Ni催化活性大幅下降, 大大减弱了表面对O₂和CO等燃料气体的吸附作用.     

Preparation of glass carbon electrode modified with nanocrystalline nickel-decorated carbon nanotubes and electrocatalytic oxidation of methanol in alkaline solution

Nanocrystalline nickel with an average diameter of about 16 nm and a face-centered cubic (fcc) structure was uniformly attached to the surface of carbon nanotubes (CNT) by wet chemistry. The sample was characterized by X-ray powder diffraction and transmission electron microscopy (TEM). A glass carbon electrode modified with nickel-modified multi-wall carbon nanotubes (MWCNTs-Ni/GCE) was prepared. The electrochemical behavior of the MWCNTs-Ni/GCE and the electrocatalytic oxidation of methanol at the MWCNTs-Ni/GCE were investigated by cyclic voltammetry in 1.0 mol/L NaOH solution. The cyclic voltammograms showed that the electron transfer between β-Ni(OH)₂ and β-NiOOH is mainly a diffusion-controlled quasireversible process, and that the electrode has high catalytic activity for the electrooxidation of methanol in alkaline medium, revealing its potential application in alkaline rechargeable batteries and fuel cells. __________ Translated from Chinese Journal of Applied Chemistry, 2007, 24(5): 503–506 [译自: 应用化学]     

Preparation, Crystal Structure and Thermal Decomposition Character of [Ni(CHZ)3]SO4·3H2O

A new coordination compound [Ni(CHZ)₃]SO₄·3H₂O (CHZ=carbohydrazide) was synthesized and characterized by elemental analysis and fourier transform infrared (FTIR) spectra, and its crystal structure was determined by X-ray single crystal diffraction. The crystal belonged to the triclinic system, space group with a=0.85237(1) nm, b=0.90964(1) nm, c=1.22559(2) nm, β=96.731(2)°, V=0.8849(2) nm³, Z=2, D_c=1.798 g·cm⁻³. In the asymmetric unit, three carbohydrazide (CHZ) bidentate ligands were coordinated with a Ni(II) cation by carbonyl O atoms and terminal N atoms of the hydrazine groups to form three planar chelate rings which were vertical to one another. Ni(II) cations, CHZ ligand molecules, sulfate anions, and lattice water molecules were jointed to a complicated three-dimensional network structure through coordination bonds, electrostatic forces and extensive hydrogen bonds. Natural bond orbital (NBO) atomic charges of CHZ were obtained from the density functional theory (DFT) method at the B3LYP/6-311+G^** level to interpret the reason why the coordination sites in carbohydrazide molecule were the oxygen atom of the carbonyl group and terminal N atoms of the hydrazine group. The thermal decomposition mechanism was tested through differential scanning calorimetry (DSC), thermogravimetric analyses, and Fourier transform infrared spectra. The kinetic parameters of the two exothermic processes of the title compound were studied applying the Kissinger's and Ozawa-Doyle's methods. The results indicated that the title complex possessed high energy and good thermal stability.     

Textured nickel tapes prepared from commercially available material

Textured Ni tapes were fabricated from commercially available nickel pellets (98.5% Ni). Ingots produced by a melt process were cold rolled to 150–400 μm thick tapes. Texturing was achieved by annealing in a reducing atmosphere (Ar + 6.5% v/v H₂). Sharp cubic biaxial textured Ni tapes were obtained by thermal treatment at 1000°C for 2 hours in a reducing atmosphere. The tapes were characterized by scanning electron microscopy, X-ray diffraction and by electron backscattering diffraction. The tensile strength, the thermal expansion behavior and the Vickers hardness for the cold rolled tapes and for the heat-treated tapes were measured.      

Lantern-type dinickel complexes: An exploration of possibilities for nickel–nickel bonding with bridging bidentate ligands

Many binuclear nickel complexes have Ni Ni distances suggesting Ni Ni covalent bonds, including lantern-type complexes with bridging bidentate ligands. This DFT study treats tetragonal, trigonal, and digonal lantern-type complexes with the formamidinate, guanidinate, and formate ligands, besides some others. Formal bond orders (ranging from zero to two) are assigned to all the Ni Ni bonds on the basis of MO occupancy considerations. A VB-based electron counting approach assigns plausible resonance structures to the dinickel cores. Model tetragonal complexes with the dimethylformamidinate and the dithioformate ligands have singlet ground states whose non-covalently bonded Ni Ni distances are close to those in their experimentally known counterparts. Trigonal dinickel complexes are unknown, but are predicted to have quartet ground states with Ni Ni bonds of order 0.5. The model digonal complexes are predicted to have triplet ground states, but the predicted Ni Ni bond lengths are longer than those found in their experimentally known counterparts. This could owe to inadequate treatment of electron correlation by DFT in these short Ni Ni bonds with their multiconfigurational character. All the Ni Ni bond distances here are categorized into ranges according to the Ni Ni bond orders of 0, 0.5, 1, 1.5, and 2, no Ni Ni bonds of order higher than two being identified. The Ni Ni bonds of given order in these lantern-type complexes are consistently shorter than the corresponding Ni Ni bonds in dinickel complexes having carbonyl ligands, attributable to the metal metal bond lengthening effect of CO ligands.     

Effect of phosphorus concentration on the electronic structure of nanocrystalline electrodeposited Ni–P alloys: an XPS and XAES investigation

A surface analysis has been conducted on a series of electrodeposited nickel‐phosphorus (Ni–P) alloys containing from 6 to 29 at.% phosphorus, using X‐ray photoelectron spectroscopy (XPS) and X‐ray excited Auger electron spectroscopy (XAES). No changes in core‐level binding energies, Ni2p3/2 and Ni2p1/2, P2p, P2s, or X‐ray excited NiLMM and PKLL Auger lines were observed regardless of phosphorus concentration. The only systematic differences observed concerned: (i) the binding energy of the Ni2p satellite peak, (ii) the fine structure of the NiLMM Auger lines, (iii) the percentage of the satellite in the total Ni2p3/2 spectrum and (iv) the valence band density of states in the Ni3d electrons region, all related to the electronic structure of the Ni–P alloys. For the first time, it has been possible to describe and rationalise the influence of (phosphorus) ligand concentration on the electronic structure of nickel‐based alloys, using a screening model proposed in the literature for clarifying the role of substituents on the electronic structure of conductor compounds of nickel. As the phosphorus content increases, the number of non‐bonding Ni3d electrons decreases. Thus the d‐type core‐hole screening is less pronounced and the binding energy of the satellite for the final state with a filled Ni4s shell increases. Copyright © 2008 John Wiley & Sons, Ltd.     

Preparation,Characterization and Crystal Structure Determination of a Nickel Complex [Ni(ftsc)_2NO_3]NO_3(Hftsc=Furan-2-carbaldehyde Thiosemicarbazone)

A new Ni(II) complex, [Ni(ftsc)2NO3]NO3 (Hftsc=furan-2-carbaldehyde thiosemicarba-zone), has been synthesized and characterized by IR, UV spectra and single-crystal X-ray diffraction analysis. It crystallizes in a monoclinic system, space group P21/n, with a=10.5203(13), b=9.2094(11), c=20.829(3), β=91.518(2)°, V=2 017.3(5)3, Z=4, F(000)=1064, Dc=1.716 g/cm3, and wR= 0.0800. The complex contains a six-coordinated nickel(II) center which is bound to two imine nitrogen atoms and two thiolato sulfur atoms of two ligands as well as two oxygen atoms from a nitrate anion to assume a distorted octahedral coordination geometry. In addition, intermolecular N-H···O and C-H···O hydrogen bonds between adjacent molecules link the molecules together to form a three-dimensional structure.     

Synthesis and characterization of a new layered organic-inorganic hybrid nickel(II) 1,4:5,8-naphthalenediimide bis-phosphonate, exhibiting canted antiferromagnetism, with Tc∼21 K

A new Ni(II) layered hybrid organic-inorganic compound of formula Ni₂[(NDI-BP)(H₂O)₂]·2H₂O has been prepared in very mild conditions from N,N′-bis(2-phosphonoethyl)napthalene-1,4:5,8-tetracarboximide (NDI-BP ligand) and NiCl₂. The X-ray powder structure characterization of the title compound suggests a pillared layered organic-inorganic hybrid structure. The distance between the organic and inorganic layers has been found to be 17.8 Å. The inorganic layers consist of corner sharing [NiO₅(H₂O)] octahedra and they are pillared by the diphosphonate groups. DC and AC magnetic measurements as a function of temperature and field indicate the presence of 2D antiferromagnetic exchange interactions between the nearest-neighbor Ni(II) ions below 100 K. A long-range magnetic ordering at T_c∼21 K has been established and is attributed to the presence of spin canting. AC magnetic measurements as a function of temperature at different frequencies confirm the occurrence of the magnetic ordering temperature at T=21 K and the presence of a slight structural disorder in the title compound.     

Ni2P/SBA-15催化剂的结构及加氢脱硫性能

以硝酸镍为镍源,磷酸氢二铵为磷源,介孔分子筛SBA-15为载体,用共浸渍法制备了含磷化镍前驱体的样品,然后在氢气流中采用程序升温还原法,制备了Ni2P质量分数为5%-40%的Ni2P/SBA-15催化剂.用X射线衍射(XRD)、N2吸附脱附、透射电子显微镜(TEM)、傅立叶变换红外光谱(FTIR)等分析测试技术对催化剂的结构进行了表征,以噻吩和二苯并噻吩(DBT)为模型化合物,在微型同定床反应器上对催化剂的加氧脱硫(HDS)性能进行了评价.结果表明,Ni2P/SBA-15催化剂中SBA-15的介孔结构依然存在,活性组分Ni2P具有良好的分散性,但随Ni2P含量的增加,催化剂的比表面积、孔容和孔径均有明显减小.当反应温度为320℃时,Ni2P含量为15%-25%(w)的催化剂就具有很好的加氢脱硫催化性能;反应温度在360℃以上时,所有催化剂都具有优异的深度脱硫催化性能.Ni2P/SBA-15催化剂对二苯并噻吩的加氢脱硫(HDS)主要以直接脱硫机理(DDS)进行.     

硫杂蒽酮镍（II）配合物与DNA的作用研究

合成了O-（硫杂蒽酮-[2]-基）-氧乙酸镍（II）配合物。通过元素分析,IR, DTA-TG谱对其结构进行了表征。研究表明：配体羧羰基脱质子后与镍离子配位,配合物中含有一定量的配位水。同时以紫外可见光谱、荧光光谱、园二色谱,电化学方法和凝胶电泳方法研究了该配合物与DNA的作用。结果表明,该配合物能在生理条件下比配体和金属离子更有效地切割质粒DNA,自由基捕捉剂的加入不影响配合物的切割活性。该配合物使DNA溶液的紫外吸收强度和园二色吸收强度降低,DNA的存在可使该配合物的氧化还原活性降低。与溴化乙锭和DNA的竞争反应说明,该配合物主要以嵌入方式与DNA结合。