Mössbauer Spectroscopic Studies of Supported α-Fe2O3 and Fe Catalysts II: The Effect of the Second Metal Addition

The effect of the addition of a second metals such as Zn and Ni on the calcinaton and reduction of alumina, magnesia and silicasupported iron catalysis with total iron loading of 5wt% is investigated by Mössbauer spectroscopy. It is shown that the reducibility of supported α-Fe₂O₃ is gradually increased by adding the second metal. The values of the magnetic hyperfine field obtained from Mössbauer spectra for the Zn or Ni-added α-Fe₂O₃ or Fe catalysts decreased with increasing second metal loading.     

K-Mo基催化剂的表面酸性与其合成醇选择性

对500℃和800℃焙烧制得的氧化态K－MoO3／γ－AlO3，K－MoO3／SiO2及非负载K－Mo催化剂进行硫化后，测试其合成醇活性．结果表明500℃焙烧制得的负载型催化剂显示较高的合成低碳烃活性和较低的合成低磷醇选择性，经800℃焙烧后，合成低磷醇的选择性大幅度提高．500℃焙烧的非负载K－Mo催化剂显示较高的合成醇选择性，经800℃焙烧后，促碳醇的选择性保持不变．用氨的吸附及TPD方法测定了各样品的酸性，并与催化剂活性对照，发现催化剂酸性越强，酸量越大，则其合成醇选择性越低．催化剂上的乙醇分解实验证实，催化剂的酸量大小与它的醇分解活性成正变关系，这些结果说明催化剂酸性对其合成醇性能有直接的影响．     

Synthesis and structure of the 1,2-isopropylidene-α-D-glucofuranose 3,5,6-bis-cyclophosphite complex with tungsten(0) pentacarbonyl

Metallocomplexes with optically active ligands are of considerable interest as catalysts of stereoselective processes. A complex of 1,2-isopropylidene-α-D-glucofuranose 3,5,6-bis-cyclophosphite with tungsten(0) pentacarbonyl has been synthesized for the first time and studied by X-ray crystallography.     

Polymer-protected palladium nanoparticles. Morphologies and catalytic selectivities

Colloidal palladium nanocatalysts prepared by in situ reductions of palladium chloride were immobilized and protected by either of two water-soluble polymers. The particle sizes and size distributions of the palladium colloids were determined by transmission electron microscopy. Their selectivities as catalysts were determined by comparing the extents of hydrogenation of carefully chosen pairs of small-molecule olefins. There was found to be high hydrogenation selectivity with regard to cyclic vs. noncyclic olefins. Selectivity was relatively low, however, among olefins that differed only in size (such as hexene vs. octene), or olefins differing only with regard to the positions of the double bonds (such as 1-octene vs. 3-octene). Selectivity could be improved by careful choice of the immobilizing polymer, and by its use at relatively high concentrations.     

STUDY ON 1-HEXENE POLYMERIZATION BASED ON ZIEGLER-NATTA CATALYSTS WITH DOPED SUPPORT

A series of Ti/Mg supported catalysts are prepared by using ball-milled mixtures of MgCl2-ethanol adducts and NaCl as supports, and 1-hexene polymerizations catalyzed by the novel catalysts are studied. It is found that the molecular weight distribution of poly(1-hexene) becomes apparently narrower when catalysts with doped supports are used, indicating that changing the structure of the support is an effective way to regulate the active center distribution of heterogeneous Ziegler-Natta catalyst.     

Alcoholysis of hydridesilanes to give silyl ethers catalyzed by rhodacarboranes closo-3,3-(Ph3P)2-3-H-3,1,2-RhC2B9H11 and closo-3,3-(η2,η3-C7H7CH2)-3,1,2-RhC2B9H11

Rhodacarboranes closo-3,3-(Ph₃P)₂-3-H-3,1,2-RhC₂B₉H₁₁ and closo-(²,³-C₇H₇CH₂)-3,1,2-RhC₂B₉H₁₁ are catalysts for the alcoholysis of hydridesilanes. Closo-3,3-(²,³-C₇H₇CH₂)-3,1,2-RhC₂B₉H₁₁ displays greater activity than closo-3,3-(Ph₃P)₂-3-H-3,1,2-RhC₂B₉H₁₁ though both rhodacarboranes catalyze the alcoholysis of hydridesilanes more efficiently than (Ph₃P)₃RhCl.A. N. Nesmeyanov Institute of Organometallic Compounds, Russian Academy of Sciences, 117813 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 7, pp. 1657–1660, July, 1992.     

Establishment of de facto standard catalysts in the polypropylene industry

Polypropylene (PP) has become an indispensable material in our daily lives. Annual worldwide production of PP is now more than 30000000 tons and is predicted to grow at an annual rate of about 6% during the first decade of the 21st century. Commercial production of PP began in 1957 with the use of TiCl(3) catalysts established by Ziegler and Natta. However, the low activities and low stereospecificities of the catalysts resulted in large amounts of catalyst residue and atactic PP in the product, necessitating steps for their removal in commercial production. As a means of finding appropriate catalysts, we developed MgCl(2)-supported TiCl(4) catalysts, which basic concept was introduction of organic compounds onto the inorganic crystal catalyst surface. This addition led to remarkable enhancements in stereospecificity with extremely high activity. Use of the new catalysts enlarged and simplified the PP production process by eliminating the steps previously required for removal of catalyst residue and atactic PP. In addition, it greatly improved the properties of the PP, enabling a much wider range of PP applications by replacing metal and engineering plastics with the highly stereoregular PP. Therefore, these catalysts helped the rapid establishment of the current PP industry and now play a major role in production. The latest MgCl(2)-supported TiCl(4) catalyst is providing precise control of the isotactic PP structure. Future expectations for this type of catalyst are to acquire a single-site nature and to contribute to the creation of a new class of hybrid materials.     

TiO_2-CeO_2催化剂湿式氧化苯酚的活性研究

采用共沉淀法制备了湿式氧化降解苯酚的TiO2-CeO2催化剂,测定了反应过程中不同反应时间的COD去除率,结果表明,当Ti、Ce摩尔比为3∶1时,在150℃、总压5MPa(其中氧分压4.5MPa)时,所制备的催化剂活性最高,反应90分钟COD去除率可以达到71%.对催化剂进行了比表面积、XRD和XPS测试,结果表明,高效的催化剂具有较多的活性位、催化剂粉末体系Ce的变价特性以及大量的表面吸附氧.     

Influence of the composition of perovskites based on SrMnO<Subscript>3</Subscript> on their catalytic properties in the oxidative coupling of methane

The oxidative coupling of methane (OCM) in a periodic regime over the SrMnO₃ and its derivatives has been investigated. It has been established that partial replacement of the strontium ion by alkali metal ions leads to an increase in both catalytic activity and in selectivity with respect to higher hydrocarbons. Comparison of the results obtained in the present work with those obtained earlier for catalysts based on SrCoO₃ led to the conclusion that the Co-containing catalysts were preferable to the Mn-containing catalysts for carrying out oxidative coupling of methane in a periodic regime.__________Translated from Teoreticheskaya i Éksperimentalnaya Khimiya, Vol. 41, No. 1, pp. 30–34, January–February, 2005.     

Soot deep oxidation catalyzed by molybdena and molybdates: a thermogravimetric investigation

Molybdena (MoO₃) and molybdates of bismuth (Bi₂Mo₃O₁₂), chromium (Cr₂Mo₃O₁₂), barium (BaMoO₄), manganese (MnMoO₄) and copper (Cu₃Mo₂O₉) were synthesized and characterized by X-ray powder diffractometry and infrared spectroscopy. They were then assessed as ‘loose contact' catalysts for soot deep oxidation (combustion) in air by thermogravimetry. A similar assessment was carried out on commercial chromia (Cr₂O₃) and tungsta (WO₃). Observed high oxidation activity of MoO₃, as compared to both Cr₂O₃ and WO₃, is attributed to the higher volatility (mobility) of MoO_x species. On similar grounds, observed high activity of MoO₃ and Cu₃Mo₂O₉, as compared to the other test molybdates, is explained. Relatively speaking, however, a higher activity was observed for Cu₃Mo₂O₉ than MoO₃, whereby soot ignition temperature decreased from 571°C (uncatalyzed oxidation) to 430°C, to occur within the temperature range of diesel exhaust (200–450°C). This observation is ascribed to copper-promoted redox conduct of Mo(VI) in the oxidation reaction of soot. Kinetics of the reaction was studied non-isothermally, and the kinetic parameters (A, k, ΔE and the reaction order) were calculated.