Liquid phase oxidation of p-chlorotoluene to p-chlorobenzaldehyde over cobalt-doped mesoporous titania with a crystalline framework

Cobalt-doped mesoporous titania with a crystalline framework synthesized by surfactant templating method presented highly selective (99%) and reasonable conversion rate (49%) of catalytic oxidation of para-chlorotoluene to para-chlorobenzaldehyde in acetic acid using aqueous hydrogen peroxide as oxidant for the first time. Recycling of the catalyst indicates that the catalyst can be used a number of times without losing its activity to a greater extent. By contrast, cobalt-doped mesoporous titania without a crystalline structure and cobalt doped the commercial titania, Degussa P25 prepared by impregnation method with the similar concentration of cobalt were found inactive. The effects of catalyst concentration, reaction time, reaction temperature, and solvents on the performance of the catalyst were also investigated.     

Fabrication and transport properties of multiwall carbon nanotube crossroads

A multiwall carbon nanotube crossroads has been fabricated by a manipulation technique using a glass microcapillary, and the low temperature transport properties investigated. The two-terminal conductance of an individual tube shows Tomonaga–Luttinger liquid behavior G∝T^α at high temperature and dI/dV ∝V ^α at low temperature. However, no evidence of such a power-law behavior is obtained in the four-terminal conductance at the junction, where the conductance shows an almost metallic behavior ‘corrected’ by weak localization. Weak localization would essentially appear in electron states at the junctions of MWNTs.     

Synthesis and adsorption properties of gold nanoparticles within pores of surface‐functional porous polymer microspheres

Mesoporous polymer microspheres with gold (Au) nanoparticles inside their pores were prepared considering their surface functionality and porosity. The Au/polymer composite microspheres prepared were characterized by transmission electron microscope (TEM), X‐ray diffraction (XRD), and Brunauer–Emmett–Teller (BET) techniques. The results showed that the adsorption of Au nanoparticles could be increased by imparting the pore structure and surface‐functional groups into the supporting polymer microspheres (in this study, poly (ethylene glycol dimethacrylate‐co‐acrylonitrile) and poly (EGDMA‐co‐AN) system). Above all, from this study, it was established that the porosity of the polymer microspheres is the most important factor that determines the distribution and adsorption amount of face‐centered cubic (fcc) Au nanoparticles in the final products. Our study showed that the continuous adsorption of Au nanoparticles with the aid of the large surface area and surface interaction sites formed more favorably the Au/polymer composite microspheres. The BET measurements of Au/poly(EGDMA‐co‐AN) composite microspheres reveals that the adsorption of Au nanoparticles into the pores kept the pore structure intact and made it more porous. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5627–5635, 2004     

Covalent functionalization of multi-walled carbon nanotubes by lipase

Lipase from Candida rugosa was covalently anchored onto acid-treated multi-walled carbon nanotubes (MWNTs) through a self-catalytic mechanism. A variety of characterization techniques including FTIR, Raman spectroscopy, and XPS were employed to demonstrate the formation of the ester linkage between lipase and MWNTs. The MWNTs-lipase biocomposites showed significantly increased solubility in some common-used organic solvents, such as THF, DMF and chloroform. This study may offer a novel and facile route for covalent modification of carbon nanotubes, and expand the potential utilization of both lipases and MWNTs in the fields of biocatalyst and biosensor.     

脉冲磁场处理对碳纳米管掺杂MgB2线材临界电流密度的影响

对碳纳米管(CNT)掺杂MgB₂超导体磁场处理后的行为进行了研究. 结果表明，CNT掺杂MgB₂超导体经5T脉冲磁场处理后临界电流密度J_c(H)在低磁场下提高了2—3倍，高场下提高一个数量级以上，扫描电镜结果显示CNT沿着处理磁场方向规则排列并且成为MgB₂基体的形核中心和高效的磁通钉扎中心. 关键词： 2')" href="#">MgB₂ 碳纳米管 脉冲磁场处理     

含有五边形—七边形缺陷的单壁纳米碳管的输运性质研究

运用第一性原理的密度泛函理论结合非平衡格林函数研究了含有五边形—七边形拓扑缺陷的纳米碳管异质结的输运性质.结果发现：拓扑缺陷对碳管的输运性质有很大影响；另外，不同类型的碳管形成的异质结的输运性质也有明显的差异. 关键词： 纳米碳管 输运性质 异质结 透射系数     

有限长扶手椅形单壁碳纳米管分子静电势的理论研究

在混合密度泛函B3LYP理论下,用3-21G基函数对有限长扶手椅形单壁碳纳米管(4,4)、(5,5)和(6,6)的构型进行优化和分子静电势计算.结果表明:除近核区域为正常的正电势外,碳纳米管结构模型的管内和管外为负电势区域;在碳纳米管结构模型的管内,管心处均出现负电势的最小值,且负电势的绝对值随着碳纳米管的曲率降低而增大,管心轴线上静电势的变化随碳纳米管的曲率降低而减少,带电粒子流比较容易通过纳米管.     

Electrochemical and Spectroscopic Studies on the Interaction of Malachite Green with DNA and Its Application

The interaction of malachite green (MG) with double‐stranded DNA (dsDNA) in pH 7.0 Britton–Robinson (B–R) buffer solution was investigated by electrochemical and spectrophotometric methods. Within the potential scan range of ?1.0 to +1.5 V (vs. SCE), MG has two oxidative peaks at 0.547 V and 0.833 V and one reductive peak at 0.362 V on cyclic voltammogram at the scan rate of 0.20 V/s. After the addition of dsDNA into the MG solution, the oxidative peak current at 0.547 V decreases obviously. The electrochemical parameters, such as the charge transfer coefficient (α), the surface reaction rate constant (k_s) and the diffusion coefficient (D), were calculated and compared between in the absence and presence of dsDNA. The results show that these parameters of MG after adding dsDNA have greatly changed, which indicates that an electrochemical active complex was formed. The interaction mechanisms of MG with dsDNA are discussed in some details from the electrochemistry and UV‐vis spectrophotometry. The reduction of the peak current of MG after adding dsDNA was further used for the quantification of dsDNA by differential pulse voltammetry (DPV). The linear range for dsDNA is in the range of 10.0–100.0 μg/mL with the linear regression equation as Δi_p (μA)=0.065+0.0096 C (μg/mL) and the detection limit of 6.0 μg/mL (3σ). The influences of coexisting substances were investigated and artificial samples were determined with satisfactory results.     

Kinetic studies of antimony and selenium atomization processes including a chemical modifier during their determination by electrothermal atomic absorption spectrometry

We have studied antimony and selenium atomization processes including a chemical matrix modifier (palladium-containing activated carbon) during their determination by electrothermal atomic absorption spectrometry. We have developed and fine-tuned an experimental setup for determining the kinetic characteristics (activation energy and frequency factor) for element atomization processes from measurements in the initial section of the analytical signal. We provide a rationale for the most likely mechanism for the interactions that occur. The results of the kinetic studies of the atomization processes showed that the modifier we developed was highly effective, as a result of formation of a thermally stable condensed system C-Pd-A (where A is the analyte). __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 73, No. 4, pp. 530–534, July–August, 2006.     

接枝羧基的有限长碳纳米管电子结构的第一性原理研究

基于局域密度泛函理论，采用第一性原理方法，建立了对(5,5)型和(9,0)型有限长碳纳米管接枝羧基官能团的原子模型，通过计算其电子分布和态密度的变化，讨论羧基官能团对碳纳米管电子结构和电子输运特性的影响. 计算表明，接枝羧基的碳纳米管,其电子结构明显改变，其费米能级上的电子态密度下降；最高占据轨道上的非定域程度减弱,致使电子输运性能呈下降趋势. 关键词： 碳纳米管 密度泛函理论 电子结构