Book Reviews

Glossary On Air Pollution, Who Regional Publications European Series No. 9 (Director, Promotion of Environmental Health, WHO Regional Office for Europe, Scherfigsvej 8, DK-2100 Copenhagen θ) 1980, 114 pages (including an introduction, a list of reviewers and a list of the sources of definitions), stiff paper cover, format 239 ± 159 mm, ISBN 92-9020-109-6, WHO Health and Biomedical Information Programme, CH-1211 Geneva 27, SFr. 12.

Spektroskopische Methoden in Der Organischen Chemie (in German), by Manfred Hesse, Herbert Meier and Bernd Zeeh, 478 pages, including 169 figures and 86 tables, flexible paper cover, ISBN 3-13-576101-0, Georg Thieme Verlag, Stuttgart 1979, price DM 26.80.

Analysis of Polycyclic Aromatic Hydrocarbons in Environmental Samples, World Health Organisation/International Agency for Research on Cancer, IARC Publication No. 29 (Series: Environmental Carcinogens, Selected Methods of Analysis, Volume 3, edited by H. Egan, Laboratory of the Government Chemist, London, U.K. et al.) 1980, 240 pages (including 17 figures, 18 tables, many formulae, an annex with 8 methods of analysis and 29 pages of valuable references in two sections), linen, format 242 ± 186 mm, ISBN 92-8-321129-4, WHO Health and Biomedical Information Programme, CH-1211 Geneva 27, US$30 or SFr. 50.

Toxic Metals and Their Analysis by Eleanor Berman, Cook County Hospital, Chicago, Illinois, U.S.A., 304 pages (including an index of 5 pages, 29 tables and 5 figures), linen, format 241 × 163 mm, ISBN 0-85501-468-7, published 1980 by Heyden International Topics in Science, Spectrum House, Hillview Gardens, London NW4 2JQ, U.K., prices £12, US$27 or DM 56.     

扶手椅型二硫化钼纳米带的电子结构与边缘修饰

采用基于密度泛函理论的第一性原理计算方法, 研究了扶手椅型二硫化钼纳米带的几何构型与电子结构, 发现其稳定性与电子性质敏感地依赖于边缘修饰. 随着边缘修饰的H原子数增加, 纳米带变得更加稳定, 并在间接带隙半导体、半金属和直接带隙半导体之间转变. 纳米带的能带结构和电子态密度显示, 其费米能级附近的能带主要由边缘态贡献. 当二硫化钼纳米带两边用不同数目的H原子修饰时, 纳米带同时具有由这两种修饰引起的边缘态并且两种边缘态的相互影响很小. 研究了三类纳米带带隙与宽度的关系, 对于每个原胞修饰0个或8个H原子的纳米带, 带隙随宽度以3为周期振荡变化; 而对于每个原胞修饰4个H原子的纳米带, 带隙振荡不再具有周期并且振荡幅度变小.     

钒钼协同作用下杂多酸催化阻聚甲基丙烯酸甲酯

利用一锅法制备了Dawson型钨磷酸和钼钒磷酸,并用红外光谱和X-射线衍射表征了其结构.采用沸腾法研究了合成的杂多酸对甲基丙烯酸甲酯(MMA)的催化阻聚性能,考察了杂多酸结构、杂多酸用量和反应温度等因素对MMA本体聚合反应的影响.结果表明:钒钼元素在杂多酸催化阻聚MMA的反应中具有明显的协同作用,而且,杂多酸对MMA的催化阻聚作用随钒原子数的增加而增强,杂多酸的用量和反应温度对MMA自聚反应的速率影响较大.在过氧化苯甲酰(BPO)为0.04 g,MMA为10 mL,H9P2Mo15V3O62质量为MMA的0.06%,反应温度为101.2℃或H9P2Mo15V3O62质量为MMA的0.03%,反应温度为89.4℃时,MMA自聚反应被抑制.与传统和常用酚阻聚剂相比,Dawson型钼钒磷酸具有阻聚效果好、后处理简单、无腐蚀和污染问题等优点,能够作为MMA的阻聚剂使用.     

Reaction with SO3 in Ionic Liquids: The Example of K2(S2O7)­(H2SO4)

The ionic liquid 1‐butyl‐3‐methylimidazolium hydrogensulfate, [bmim]HSO₄, turned out to be resistant even to strong oxidizers like SO₃. Thus, it should be a suitable solvent for the preparation of polysulfates at low temperatures. As a proof of principle we here present the synthesis and crystal structure of K₂(S₂O₇)(H₂SO₄), which has been obtained from the reaction of K₂SO₄ and SO₃ in [bmim]HSO₄. In the crystal structure of K₂(S₂O₇)(H₂SO₄) (orthorhombic, Pbca, Z = 8, a = 810.64(2) pm, b = 1047.90(2) pm, c = 2328.86(6) pm, V = 1978.30(8) ų) two crystallographically unique potassium cations are coordinated by a different number of monodentate and bidentate‐chelating disulfate anions as well as by sulfuric acid molecules. The crystal structure consists of alternating layers of [K₂(S₂O₇)] slabs and H₂SO₄ molecules. Hydrogen bonds between hydrogen atoms of sulfuric acid molecules and oxygen atoms of the neighboring disulfate anions are observed.     

Pentafluorobenzoato‐dimolybdenum(II) Solvate and Co‐crystal Complexes with Benzene and Naphthalin

The quadruply bonded Mo₂⁴⁺ complex Mo₂(DAniF)₃(OOCC₆F₅) ( 1 ) [DAniF = N,N′‐bis(4‐methoxyphenyl)formamidinate] was synthesized. The solvate Mo₂(DAniF)₃(OOCC₆F₅) · (C₆H₆) ( 2 ) and co‐crystal Mo₂(DAniF)₃(OOCC₆F₅) · (C₁₀H₈) ( 3 ) complexes were obtained by self‐assembly of crystals of 1 with benzene and naphthalin, respectively. Compounds 1 , 2 , and 3 were structurally characterized by single‐crystal X‐ray diffraction. In monomer 1 , the Mo–Mo bond length of 2.0874(6) Å is typical for dimolybdenum quadruple bonds. The solvate complex 2 was stabilized by weak π–π stacking interactions between the benzene molecule and the pentafluorophenyl ring (as indicated by a center‐to‐center distance of 3.838(10) Å and a center‐to‐plane distance of 3.712(4) Å between phenyl and pentafluorophenyl ring) and intermolecular C–H ··· F–C interactions (the shortest F ··· H distance is 2.560(2) Å). In complex 3 , a one‐dimensional chain was formed by C–H ··· F–C interactions between the hydrogen atoms in naphthalin and the fluorine atoms in the monomer (H ··· F distances of 2.582(2) Å). Information on the structures in solution of the three crystals was obtained by ¹H NMR spectroscopy.     

The electrochemical evaluation of antipsychotic drug (promethazine) in biological and environmental samples through samarium cobalt oxide nanoparticles

In this work, we developed a perovskite structured samarium cobalt oxide nanoparticles (SmCoO₃ NPs) with the aid of the co-precipitation method. The rare earth metal (Sm) and cobalt oxide combined to form a perovskite lattice structure. One-pot route synthesized SmCoO₃ NPs were scrutinized successfully through various physicochemical techniques. Concerning its effective thermal stability and electrical properties, the synthesized SmCoO₃ NPs have been effectively implemented in the electrochemical evaluation of promethazine hydrochloride (PHY) using cyclic voltammetry. The electrochemical detection of PHY was performed through SmCoO₃ NPs-modified glassy carbon electrode (GCE) and unmodified GCE. The electron transfer kinetics, effect of scan rate, the influence of pH, electroactive surface area, selectivity, and sensitivity have been studied. The electron charge transfer rate (R_ct) and electrolyte resistance (R_s) were calculated to be 105.59 (Ω) and 150 (Ω) in the ferricyanide probe, indicating great facilitation of the electron transfer between PHY and SmCoO₃ NPs deposited on the electrode surface. Further, the optimized SmCoO₃-modified GCE exemplifies excellent selectivity, storage stability, reproducibility, repeatability, detection limit (5 nM), sensitivity (0.594 μA μM^?1 cm^?2), and wide consecutive linear ranges, respectively. Besides, the proposed method has been effectively employed for the detection of PHY in the various real samples which reveals good recoveries of 95.40–99.17%.     

Binary Metal Oxide Adsorbed Graphene Modified Glassy Carbon Electrode for Detection of Riboflavin

Tungsten oxide (W) decorated titanium oxide (T) adsorbed onto a graphene (Gr) and modified the glassy carbon electrode for the electrochemical quantification of riboflavin (RF) in edible food and pharmaceuticals. For comparison, nanocomposites are formed using graphene oxide (GO), reduced graphene oxide (rGO) and pure graphite (G) sheets to study the electrochemical activities towards riboflavin. The ternary WTGr modified GCE shows the highest electrocatalytic activity due to synergetic interactions between the metal oxide and graphene. The electrochemical observations are supported by the SEM, HRTEM, XRD, UV-Vis, Zeta potential (ζ) and size data. The sensor shows a wide linear range 20 nM–2.5 μM with a detection limit 25.24 nM and sensitivity (4.249×10⁻⁸ A/nM). The fabricated sensor is validated in real samples.     

纳米二硫化钼的掺杂及催化电解水产氢的研究进展

电催化水分解制氢是可以形成闭环的生产过程, 起始原料与副产物均为水、 过程清洁无污染, 是极具希望的产氢策略. 目前制约其发展的瓶颈之一是价格昂贵的Pt基贵金属催化剂. 为推动电催化分解水制氢的普及, 亟待开发低成本非贵金属催化剂. 在众多备选非贵金属催化材料中, 纳米层状结构二硫化钼(MoS₂)因催化效果可期、 价格低而获得了广泛关注. 然而, 通常条件下易于获得的层状结构2H相MoS₂大面积的基面部分显示惰性, 仅在片层边缘处存在少量活性位点, 且导电性较差, 因而尚不能替代Pt基催化剂, 而如何增加其活性位点数量和提高其导电性成为亟待解决的问题; 另一方面, 1T相MoS₂虽然活性高、 导电性好, 但却存在制备困难及稳定性差的问题. 鉴于此, 研究者通过对纳米MoS₂进行掺杂改性实现了其活性与稳定性的有效提升. 本文对非贵金属纳米MoS₂催化剂掺杂改性的方法、 机理及其电催化水解制氢性能的相关研究进行了总结与讨论. 作为典型的非贵金属电解水析氢催化剂, MoS₂具有巨大发展潜力, 本文能够对相关非贵金属催化剂的研发提供有益的参考.     

碳掺杂六方氮化硼/二硫化钼吸附还原六价铬和助催化降解有机污染物

针对二硫化钼(MoS₂)因易团聚导致去除六价铬[Cr(Ⅵ)]容量低的问题, 利用六方氮化硼(BN)良好的吸附性和化学稳定性, 以多巴胺作为BN改性剂, 通过煅烧法和水热法制得碳掺杂六方氮化硼(c-BN)负载MoS₂纳米复合材料(c-BN@MoS₂). 研究了室温条件下c-BN@MoS₂对Cr(Ⅵ)的吸附还原和助催化降解有机污染物的性能. 实验结果表明, c-BN@MoS₂在40 min内对50 mg/L的Cr(Ⅵ)吸附还原去除率高达95%以上, 且以将 Cr(Ⅵ)还原至Cr(Ⅲ)为主, 在pH值为2、 温度为25 ℃条件下去除Cr(Ⅵ)最大容量可达401 mg/g, 显著高于 MoS₂(98 mg/g). 分析显示, c-BN不仅提高了MoS₂的平均孔径, 还可促进MoS₂生成金属特性的1T相, 有利于吸附Cr(Ⅵ)和加快氧化还原过程中的电子转移. 在Fe²⁺/PMS(过一硫酸氢盐)催化体系加入c-BN@MoS₂, 该体系对磺胺甲恶唑的降解性能明显增强, 其反应速率常数提高3倍, 这主要归因于c-BN@MoS₂明显加快了Fe³⁺到Fe²⁺的转变, 导致更多?OH产生, 达到增强降解污染物的目标.     

镍修饰WO3膜光电化学氧化水的研究

在强碱性溶液中低电压低电流条件下在W基底上经阳极氧化得到致密WO3层,而后在酸性条件下在WO3表面经光辅助电化学还原沉积镍,所获得的复合电极具有优异的光电化学氧化水的活性和稳定性.SEM,EDX,XPS和TEM等表征表明复合电极中具有体心立方结构的W基底经阳极氧化形成了具有单斜结构的WO3层,表面修饰的镍物种以Ni(OH)2形式存在.光电化学实验表明WO3层对可见光具有良好的光响应,表面修饰镍后,光电氧化水的起始电位显著降低,电极的稳定性也得以提高.