DEHYDROGENATION AND AROMATIZATION OF METHANE IN THE ABSENCE OF OXYGEN OVER DOPED Mo/HZSM-5 CATALYSTS

研究了在Ｍｏ／ＨＺＳＭ－５催化剂上添加助剂以及不同的反应预处理温度对甲烷无氧脱氢芳构化反应的影响。实验结果表明，由于第二组分的添加，Ｍｏ／ＨＺＳＭ－５催化剂的活性和选择性都得到了较大程度的改善。预处理温度是影响催化剂反应性能的关键因素。Ｍｏ－Ｒｕ／ＨＺＳＭ－５催化剂经过８７３Ｋ空气预处理后，甲烷在９７３Ｋ的转化率约为１０％，催化剂的稳定性也得到较大程度的提高。ＴＰＳＲ实验结果表明，Ｒｕ的加入降低了芳烃生成的温度。ＴＰＯ和ＤＴＡ实验结果表明，在Ｍｏ－Ｒｕ／ＨＺＳＭ－５催化剂上可生成较多的碳物种，结合反应结果，可以认为反应过程中生成的碳物种对甲烷的无氧脱氢芳构化反应是起积极作用的     

有机混合稀土化合物与有机锡化合物作为润滑添加剂的协同效应

用四球摩擦磨损试验机考察了环烷酸混合稀土、环烷酸亚锡及它们的复配物添加在26#白油中的摩擦学性能, 并用俄歇尔电子能谱研究了磨斑表面边界膜的化学组成. 结果表明: 环烷酸亚锡和环烷酸稀土在抗磨性能和减摩性能方面均存在明显的协同效应, 其复配物具有比ZDDP更好的抗磨减摩性能, 有望作为新型的高效多功能润滑添加剂在工业实际中得到应用, 复配物在摩擦表面形成的含稀土元素和锡元素的边界润滑膜是其具有良好摩擦学性能的主要原因.     

三氟乙酸修饰TiO_2纳米微粒的制备及磨擦学性能

采用化学法制备一种粒径约50nm的三氟乙酸修饰TiO2纳米微粒,并用高分辨透射电镜(HRTEM)、傅立叶红外(FTIR)和热分析(TG、DTA)、X射线粉末衍射(XRD)等手段对该纳米微粒进行了表征,用MRS 10A型四球磨擦试验机考察了该纳米微粒在液体石蜡中的磨擦学性能 结果表明:三氟乙酸修饰TiO2纳米微粒能分散于液体石蜡中且具有较好的抗磨性能,能极大地提高液体石腊的抗磨性和承载能力,降低了磨擦系数     

杂原子Y分子筛的二次合成及其吸附脱硫性能

采用液-固相同晶取代反应制备了骨架含Ga的Y型分子筛, 并对其吸附脱硫性能进行了研究. 在室温, 空速为7 h−1的条件下, 镓化Y型分子筛([Ga]AlY)处理噻吩、四氢噻吩、4,6-二甲基二苯并噻吩(4,6-DMDBT)正壬烷溶液(硫含量500 μg•g−1), 每克吸附剂吸附硫的量分别为7.7、17.4、14.5 mg. 采用密度泛函理论(DFT)中的广义梯度近似方法(GGA)计算各分子中硫原子上的电荷数, 噻吩中硫原子的电荷数为−0.159, 而4,6-DMDBT和四氢噻吩分别为−0.214、0.298. 四氢噻吩和4, 6-DMDBT中硫原子上的电子密度大于噻吩中硫原子上的电子密度, 这就使得四氢噻吩和4,6-DMDBT中的硫原子与吸附位间的作用会远大于噻吩中的硫原子与吸附位间的作用, 吸附容量必然会大很多. 采用[Ga]AlY处理抚顺石油二厂的催化裂化汽油(硫含量：299 μg•g−1), 每克吸附剂处理2.1 mL汽油时, 处理后汽油的硫含量为54.8 μg•g−1, 说明[Ga]AlY对汽油脱硫有一定的效果.     

Effect of the rhenium additive to VOx/TiO2 and MoOx/TiO2 catalysts on their properties in oxidative dehydrogenation of propane

VO_x/TiO₂ and MoO_x/TiO₂ catalysts with the addition of Re (Re/V or Mo = 0.5) were synthetized and tested in oxidative dehydrogenation of propane and in reduction by propane. XPS measurements showed depletion of the surface in Re. The Re additive does not affect the total conversion of propane, but increases the selectivity to propene. The effect is more pronounced for the MoO_x/TiO₂ catalyst. The increase in the selectivity to propene is accompanied with the increase in the reducibility of the catalysts.     

CoTiO3纳米粉体的合成及其对MnO2电极材料的改性作用

采用溶胶-凝胶法制得钙钛矿型CoTiO₃纳米粉体，借助XRD、TEM以及循环伏安测试对其性质进行了表征。不同量的所制样品用于MnO₂电极的物理掺杂，进行了深度恒流放电、循环伏安和充放电测试。结果表明在40%KOH电解质溶液中，样品掺杂量为5%时改性效果较好。纳米CoTiO₃参与了电极反应，抑制了电化学惰性物质Mn₃O₄的生成，从而有效地改善MnO₂的放电性能，放电容量较I.C     

以万古霉素为流动相添加剂的高效液相色谱法手性分析系统的建立

以丹酰化苯甘氨酸、丹酰化苯丙氨酸、丹酰化丝氨酸、丹酯化丙氨酸为模型化合物，通过对色谱柱类型、缓冲液类型、pH和盐浓度、万古霉素用量、甲醇用量、柱温等色谱参数进行考察，建立了以万古霉素为手性流动相添加剂在普通色谱柱上进行手性分析的色谱系统，并在该系统中成功地拆分了酮洛芬对映体。     

Enthalpies of formation of methoxybenzoic acids and their dependence on structure

The energy of combustion of 2,5-dimethoxybenzoic acid has been determined using a static bomb calorimeter. The vapor pressures of the compound have been measured over a 18 K temperature interval by the Knudsen effusion technique. Heat capacity measurements betweenT=270 K andT=338 K were carried out by DSC. From these experimental results the standard molar enthalpies of combustion, sublimation, and formation in the crystalline and gaseous state at the temperature 298.15 K have been derived. With this compound, the series of mono- and dimethoxy-benzoic acids have been completed. Their_f H _m ^o values were expressed by an additive relationship, taking into account the number of methoxy groups and the number of all 1,2 interactions: an accuracy of 3.3 kJ·mol^–1 was achieved. In an alternative approach the substituent effect of the methoxy groups was evaluated within the framework of isodesmic reactions. The effect of disubstitution was referred to mono derivatives and the excess energy—the so-called buttressing effect—was evaluated (2–24 kJ· mol^–1 for individual bis derivatives). These values were explained in terms of the conformation of the methoxy group around the C_ar-O bond.     

碳质颗粒添加物对渣油热反应生焦的影响

在高压反应釜中研究了三种不同碳质颗粒添加物对克拉玛依常压渣油420℃氮气气氛下热反应生焦的影响。实验结果表明，反应初期碳质颗粒在一定程度上抑制渣油的热反应生焦。碳质颗粒抑制生焦的能力与其表面对极性组分的润湿吸附能力有直接关系，表面易被极性组分润湿的颗粒吸附沥青质的能力强，其抑制渣油生焦的能力也强。碳质颗粒对沥青质的吸附能力和抑制生焦的能力与其比表面积没有直接关系。生焦量随反应时间的变化表明，碳质颗粒在生焦的初期有抑制生焦的作用，后期有促进作用。对甲苯不溶物（TI）的扫描电子显微镜（SEM）和热重（TG）分析表明，和不含添加物的TI相比，含添加物的TI中，小球状甲苯不溶物的数量少、直径小。沥青质和生焦前驱相在碳质颗粒添加物表面的吸附和铺展作用是抑制渣油生焦的主要原因，该作用可以限制生焦前驱相的融并长大，在反应的初始阶段减少生焦量。     

Influence of Some Aggressive Media on Corrosion Resistance of Mortars With Spent Cracking Catalyst

The influence of spent catalyst from catalytic cracking in fluidized bed on the hydration process of cement and the properties of cement mortars were studied. The spent catalyst was used as an additive to cement in the mortars (10 and 20% of cement). The samples of mortars kept in water for28 days, then they were placed in sulfate and chloride media for 2 months (the control samples were kept in water for 3 months). After this time they were subjected to bending strength and compressive strength determinations. Thermogravimetric and infrared absorption studies were performed and capillary elevation, capability of binding heavy metals, and changes in mass and apparent density were determined too. The studies disclosed the pozzolana nature of spent catalyst and its influence on cement mortars being in contact with corrosive media. This revised version was published online in August 2006 with corrections to the Cover Date.