氧化物担载Ni（C5H5）2衍生催化剂的EXAFS表征

本文以二茂镍为母体化合物,以氧化铝和氧化硅为担体制备了担载镍催化剂。为了表征其结构特点,对这些催化剂热分解处理前后的样品在日本筑波高能物理研究所(Photon-Factory)的同步辐射加速器BL—10B EXAFS实验站进行了外延x-光精细结构谱测定(透射法)。以单散射球面波理论对实验结果进行了多参数拟合,同时对母体化合物也进行了平行测定和拟合,以验证数据及拟合方法的可靠性。研究结果表明,母体化合物的EXAFS结果与文献XRD相一致;母体化合物与担体表面发生了强烈的化学作用;镍组分在催化剂表面高度分散,氧化铝与Ni(C_5H_5)_2有更强的相互作用形成。Ni[(O)_s]_n(n≈4),近一半的镍原子周围有0.30 nm处的镍原子散射;氧化硅上除Ni[(CO)_s]_n(n≈3)外,在0.30 nm处有配位数为2的非成键Ni原子。     

EXAFS Spectroscopy of the Alkoxide Precursor Zr(O n Bu)4 and its Modification in Solution

Summary. The molecular structure of the transition metal alkoxide Zr(OⁿBu)₄ in toluene and its modification by addition of i-propanol, tetrahydrofurane, and the coordinating ligand pentane-1,3-dione (Hacac) were investigated by extended X-ray absorption fine structure (EXAFS) and X-ray absorption near edge structure (XANES) spectroscopy. Zr(OⁿBu)₄ dissolved in toluene forms dimers. It was proved that cluster size is a function of the number of added equivalents ligand. In contrast, the addition of i-propanol or tetrahydrofurane caused no structural changes observable by EXAFS spectroscopy. A detailed discussion of the structural models is given in terms of possible alternatives and errors within the EXAFS analysis.     

构筑可控催化氧化性能催化剂用于醇的转化

通过金属离子替代的方法设计了催化氧化性能不同的Mg-Al-Ru-CO₃类水滑石、Co-Al-Ru-CO₃类水滑石和Ru-Co(OH)₂-CeO₂等三种催化剂. XRD实验表明钌部分替换制得的Mg-Al-Ru-CO₃和Co-Al-Ru-CO₃可保持水滑石的结构; 但用铈替代铝之后得到的Ru-Co(OH)₂-CeO₂催化剂无法保持水滑石的结构， 而是由氢氧化钴和二氧化铈的微晶组成. XPS 和Ru K-edge XAFS的测试结果证实Mg-Al-Ru-CO3催化剂中钌被等键长的6个氧原子包围， 该催化剂可有效地催化氧化醇类； Co-Al-Ru-CO₃催化剂中钌被两种键长不等的6个氧原子包围， 其中短键长的Ru═O是催化氧化性能增强的原因； Ru-Co(OH)₂-CeO₂催化剂中钌被两种键长不等的5个氧原子包围， 其对于各类醇均有高效的催化氧化性能， 原因归功于配位数少的钌物种.     

Investigation of the Crystallisation Behaviour of Lead Titanate (PT), Lead Zirconate (PZ) and Lead Zirconate Titanate (PZT) by EXAFS-Spectroscopy and X-Ray Diffraction

Two solid solutions of lead zirconium titanates PbZr _x Ti_{1 – x} O₃ (x = 0.1 and 0.35) as well as the reference compounds lead titanate and lead zirconate were prepared from zirconium and titanium n-propoxide, dissolved in 2-methoxyethanol, by sol-gel process. The amorphous products after pyrolysis of the dried gels and the crystalline phases were studied by EXAFS spectroscopy to monitor the structural changes from the amorphous oxide mixture to the crystalline ceramics after calcination. Additionally, the crystalline phases were identified by X-ray diffraction (XRD).It follows from the analysis of the EXAFS data that the local order of the amorphous phases seems to be completely different from that of the crystalline phase. There is no indication of a preformation of the local order of the perovskite structure. The analysis of our EXAFS spectra can be interpreted very consistently with the assumption that in the amorphous samples a segregation exists on molecular level and the low crystallisation temperatures are a consequence of very short diffusion paths.     

Spectroscopic characterization of alkaline earth uranyl carbonates

A series of alkaline uranyl carbonates, M[UO₂(CO₃)₃]·nH₂O (M=Mg₂, Ca₂, Sr₂, Ba₂, Na₂Ca, and CaMg) was synthesized and characterized by inductively coupled plasma mass spectrometry (ICP-MS) and atomic absorption spectrometry (AAS) after nitric acid digestion, X-ray powder diffraction (XRD), and thermal analysis (TGA/DTA). The molecular structure of these compounds was characterized by extended X-ray absorption fine-structure (EXAFS) spectroscopy and X-ray photoelectron spectroscopy (XPS). Crystalline Ba₂[UO₂(CO₃)₃]·6H₂O was obtained for the first time. The EXAFS analysis showed that this compound consists of (UO₂)(CO₃)₃ clusters similar to the other alkaline earth uranyl carbonates. The average U-Ba distance is 3.90±0.02 Å.Fluorescence wavelengths and life times were measured using time-resolved laser-induced fluorescence spectroscopy (TRLFS). The U-O bond distances determined by EXAFS, TRLFS, XPS, and Raman spectroscopy agree within the experimental uncertainties. The spectroscopic signatures observed could be useful for identifying uranyl carbonate species adsorbed on mineral surfaces.     

Molecular structure-activity relationships for the oxidation of organic compounds using mesoporous silica catalysts derivatised with bis(halogeno)dioxomolybdenum(VI) complexes

Mo K-edge XAFS spectra have been measured for ordered mesoporous silica MCM-41 grafted with the complexes [MoO2X2(thf)2] (X=Cl, Br). For grafting reactions in the absence of triethylamine, materials with 1 wt. % Mo are obtained; the Mo K-edge EXAFS results indicate the co-existence of isolated surface-fixed monomeric species [MoO2[(-O)3SiO]2(thf)(n)] and [MoO2[(-O)3SiO]X(thf)(n)]. When Et3N is used in the grafting reactions, materials with 4 wt. % Mo are obtained. The EXAFS data for the material prepared using [MoO2Cl2(thf)2] and Et3N indicate the presence of dinuclear species with two Mo(VI) centres, each with two Mo=O groups and each linked by one or two oxo bridges (Mo...Mo 3.27 A). The molybdenum centres in the material prepared using the dibromo complex comprise mainly isolated four-coordinate dioxomolybdenum(VI) and trioxomolybdenum(VI) monomeric species, with a small contribution from dimeric species. All materials were further characterised in the solid state by powder X-ray diffraction, N2 adsorption analysis, MAS NMR (13C, 29Si) and FTIR spectroscopy. The derivatised MCMs perform differently as catalysts in the liquid-phase oxidation of various olefins and alcohols with tert-butyl hydroperoxide. The highest alkene epoxidation activity was recorded for the catalysts with low metal loading, whereas the material containing oxo-bridged dimers had the highest activity for oxidation of alcohols. The recyclability of all the catalysts was tested: the catalytic activity of the derivatised materials tended to stabilize with ageing.     

Local structure of core/shell nanocrystalline particles produced by surfactant-assisted ball milling of Fe powder in paraffin

Surfactant-assisted ball milling of the Fe powder in paraffin has been used for fabrication of core–shell nanocrystalline particles. The local atomic structure of the bulk and surface layers of the mechanically milled particles has been studied using X-ray absorption spectroscopic techniques with synchrotron radiation from the DORIS storage ring at DESY, Hamburg. Regardless of milling environment composition, the as-prepared powders were shown to be characterized by a significant drop in the EXAFS signal intensity and coordination numbers of the Fe–Fe pairs due to the formation of nanocrystalline state in the particles. It has been shown that an addition of perfluorononanoic acid as a surfactant has a more prominent effect on the structure of the shell layers. The effect is revealed as an appearance of light element atoms (O, F, C) in the local atomic environment of the Fe atoms due to formation of oxide, carbide and adsorbed structures of different types in the particle shell.     

Bayesian Analysis of Exafs Data

In this paper we demonstrate the use of Bayesian analysis methods for the analysis of EXAFS data. We will discuss the physical parameters that may be estimated by the method and demonstrate the applicability of the method to Molybdenum coordination compounds.     

Experimental Evidence for the Incorporation of Two Metals at Equivalent Lattice Positions in Mixed-Metal Metal–Organic Frameworks

Metal–organic frameworks containing multiple metals distributed over crystallographically equivalent framework positions (mixed-metal MOFs) represent an interesting class of materials, since the close vicinity of isolated metal centers often gives rise to synergistic effects. However, appropriate characterization techniques for detailed investigations of these mixed-metal metal–organic framework materials, particularly addressing the distribution of metals within the lattice, are rarely available. The synthesis of mixed-metal FeCuBTC materials in direct syntheses proved to be difficult and only a thorough characterization using various techniques, like powder X-ray diffraction, X-ray absorption spectroscopy and electron paramagnetic resonance spectroscopy, unambiguously evidenced the formation of a mixed-metal FeCuBTC material with HKUST-1 structure, which contained bimetallic Fe−Cu paddlewheels as well as monometallic Cu−Cu and Fe−Fe units under optimized synthesis conditions. The in-depth characterization showed that other synthetic procedures led to impurities, which contained the majority of the applied iron and were impossible or difficult to identify using solely standard characterization techniques. Therefore, this study shows the necessity to characterize mixed-metal MOFs extensively to unambiguously prove the incorporation of both metals at the desired positions. The controlled positioning of metal centers in mixed-metal metal–organic framework materials and the thorough characterization thereof is particularly important to derive structure–property or structure–activity correlations.