固体磷酸催化剂的活性相

研究了固体磷酸催化剂活性与其自由磷酸聚合态及磷酸硅晶型的关系，指出高活性磷酸催化剂应具备的条件，即自由磷酸中应为正磷酸和焦磷酸的混合物，结合态磷应具有“Ｃ”晶型。     

New stage in living cationic polymerization: An array of effective Lewis acid catalysts and fast living polymerization in seconds

Our recent extensive research on Lewis acid catalysts with a weak base for the cationic polymerization of vinyl ethers led to unprecedented living reaction systems: fast living polymerization within 1–3 s; a wide choice of metal halides containing Al, Sn, Fe, Ti, Zr, Hf, Zn, Ga, In, Si, Ge, and Bi; and heterogeneously catalyzed living polymerization with Fe₂O₃. The use of added bases for the stabilization of the propagating carbocation and the appropriate selection of Lewis acid catalysts were crucial to the success of such new types of living polymerizations. In addition, the base‐stabilized living polymerization allowed the quantitative synthesis of star‐shaped polymers with a narrow molecular weight distribution via polymer‐linking reactions and the precision synthesis and self‐assembly of stimuli‐responsive block copolymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1801–1813, 2007.     

CeO2-ZrO2-Y2O3对Pt-Rh型三效催化剂性能的影响

采用共沉淀法技术制备了Ce0.35Zr0.55Y0.10固溶体,并对其进行了比表面积、储氧量的测试和XRD的表征.将其用于低贵金属Pt-Rh型三效催化剂的制备,考察了CeO2-ZrO2-Y2O3对三效催化剂性能的影响.结果表明,Ce0.35Zr0.55Y0.10具有与Ce0.50Zr0.50O2相似的立方结构和相近的储氧量,经高温(1000 ℃)后仍能保持较大的比表面积(38.66 m2·g-1).和含Ce0.50Zr0.50O2的三效催化剂相比,含CeO2-ZrO2-Y2O3的三效催化剂经高温老化后,C3H8,CO,NO仍具有较高的转化率和较低的起燃温度.     

Dirhodium(II)-catalyzed carbonyl ylide generation. Stereoelectronic control in dioxolane formation

The combination of ethyl diazoacetate with aryl aldehydes in the presence of copper(I) or rhodium(II) catalysts results in the formation of 1,3-dioxolane products in moderate to good yields. These reactions occur through a pathway that involves ylide intermediates. Catalyst-dependent diastereocontrol is observed and suggests that metal-associated ylides are involved in the product-determining step. The influence of aryl aldehyde substituents has been determined. Current address. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 961–965, May, 1998.     

Pd(0)‐catalyzed polyaddition of bifunctional vinyloxiranes with 1,3‐dicarbonyl compounds: The synthesis of polymers containing hydroxy and carbonyl groups

The palladium(0)‐catalyzed polyaddition of bifunctional vinyloxiranes [1,4‐bis(2‐vinylepoxyethyl)benzene ( 1a ) and 1,4‐bis(1‐methyl‐2‐vinylepoxyethyl)benzene ( 1b )] with 1,3‐dicarbonyl compounds [methyl acetoacetate ( 4 ), dimethyl malonate ( 6 ), and Meldrum's acid ( 8 )] was investigated under various conditions. The polyaddition of 1 with 4 was carried out in tetrahydrofuran with phosphine ligands such as PPh₃ and 1,2‐bis(diphenylphosphino)ethane (dppe). Polymers having hydroxy, ketone, and ester groups in the side groups ( 5 ) were obtained in good yields despite the kinds of ligands employed. The number‐average molecular weight value of 5b was higher than that of 5a . The polyaddition of 1b and 6 was affected by the kinds of ligands employed. The corresponding polymer 7b was not obtained when PPh₃ and 1,2‐bis(diphenylphosphino)ferrocene were used. The polyaddition was carried out with dppe as the ligand and gave polymer 7b in a good yield. The molecular weight of the polymer obtained from 1b and 8 was much higher than those of polymers 5b and 7b . The polyaddition with Pd₂(dba)₃ · CHCl₃/dppe as a catalyst (where dba is dibenzylideneacetone) produced polymer 9b in a 92% yield (number‐average molecular weight = 45,600). The stereochemistries of all the obtained polymers were confirmed as an E configuration by the coupling constant of the vinyl proton. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2487–2494, 2002     

Influence of the texture of chromia catalysts on their activity in synthesis of 2-methylthiophene

The texture of Cr₂O₃-K₂O/Al₂O₃catalysts containing oxides of rare earth elements (REE) was studied. The catalysts are used for the synthesis of 2-methylthiophene by the reaction of H₂S with n-pentane or piperilene. The heterocyclization of n-pentane is a consecutive reaction involving a step of dehydrogenation of initial hydrocarbon. At this step the texture of the catalyst affects the yield of 2-methylthiophene. The yield of 2-methylthiophene obtained from piperilene and I₂S is independent of the catalyst texture.     

Selective oxidation of octadecan-1-ol to octadecanoic acid over Co3O4/SiO2 catalysts

Factors (reaction temperature, reaction time, flow rate of oxygen, amount of catalyst, etc.) influencing the catalytic properties of Co₃O₄/SiO₂catalyst in the oxidation octadecan-1-ol to octadecanoic acid were investigated. The catalysts were characterized by means of XRD, FT-IR and N₂-adsorption. The experimental results indicate that under the optimal condition the selectivity to octadecanoic acid reached 97.5 % over 5 % Co₃O₄/SiO₂ catalyst.This revised version was published online in December 2005 with corrections to the Cover Date.     

CO Oxidation on Cu/MgO-SiO2 Sol-Gel Derived Catalysts

Sol-gel Cu//MgOSiO₂ catalysts were prepared gelling tetraethoxysilane (TEOS), magnesium ethoxide and copper acetylacetonate at pH 3 and pH 9. The catalysts shown specific surface areas ca. 500 m²/g and 140 m²/g for pH 9 and pH 3 preparations respectively. Si(OH) and Si(OH)₂ hydroxy groups were observed by MAS-RMN spectroscopy in both preparations. CO₂-TPD and NH₃-TPD desorption thermograms showed that acid and basic sites were formed on the catalysts surface. It has been found that the catalysts having the highest density of basic sites were the catalysts showing the highest activity for the CO oxidation. It is proposed that the catalytic activity depends of the relative Cu⁼¹/Cu⁼² stability given by the support acidity.     

Thermal latency of novel chelating borate catalysts as latent catalysts for epoxy–phenolic resins

Novel quaternary ammonium bis(2‐oxybenzoyloxy)borate salts ( 1a – 1c ) or quaternary ammonium bis(1,2‐benzenedioxy)borate salts ( 2a and 2b ) with tetra‐n‐butylammonium (TBA⁺), tetra‐n‐octylammonium (TOA⁺), or bis(triphenylphosphoranylidene)ammonium (PNP⁺) cations were synthesized as latent catalysts of epoxy/phenol–novolac resins by the complexation between boric acid and salicylic acid or catechol, followed by neutralization with quaternary ammonium hydroxide. Polyaddition reactions of diglycidyl ether of bisphenol A (DGEBA) and 4,4′‐bisphenol F (44BPF) or bisphenol F (BPF‐D) with the ammonium borates were investigated as model reactions of epoxy/phenol–novolac resin systems with respect to the thermal latency and storage stability of the catalyst. The polyaddition of DGEBA/44BPF with 1a – 1c in diglyme at 150 °C for 6 h proceeded up to 85–96% conversions and gave polymers with number‐average molecular weights of 4180–10,500, whereas the polyaddition at 80 °C for 6 h gave less than 8% conversions. However, the polyaddition with 2a containing TBA⁺ cation proceeded to only a 32% conversion at 150 °C for 6 h in diglyme and to a 64% conversion even at 180 °C for 6 h in triglyme and only gave low molecular weight oligomers, and no reaction proceeded in the polyaddition at 80 °C. However, polyaddition with 2b containing PNP⁺ cation proceeded up to a 96% conversion at 150 °C for 6 h in diglyme and gave a higher molecular weight polymer with a number‐average molecular weight of 8050, whereas the polyaddition at 80 °C for 6 h gave only a 5% conversion. The catalytic activity of ammonium borates 1a – 1c and 2a and 2b depended on the borate anion structure: 1a and 1c with bis(2‐oxybenzoyloxy)borate anion revealed higher activity than 2a and 2b with bis(1,2‐benzenedioxy)borate anion, respectively. In comparison with tetra‐n‐butylammonium bromide (TBAB) as a conventional ammonium salt or tetra‐n‐butylammonium tetrakis(benzoyloxy)borate (TBA‐TBB), 1a – 1c and 2b revealed better thermal latency. The catalytic activity of ammonium borates also depended on the bulkiness of the ammonium cation, and the order of activity was 1c (PNP⁺) > 1b (TOA⁺) ≧ 1a (TBA⁺) and 2b (PNP⁺) > 2a (TBA⁺). The storage stability of DGEBA/BPF‐D with the ammonium borate catalysts 1a – 1c and 2a and 2b in bulk at 40 °C was much better than that with TBAB and TBA‐TBB. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2702–2716, 2002     

Effect of iron-containing catalysts on thermal decomposition of cured GAP-AP propellants

The effects of various burning rate catalysts on thermal decomposition of cured glycidyl azide polymer (GAP)-ammonium perchlorate (AP) propellants have been studied by means of thermal analysis and a modified vacuum stability test (MVST). Four types of iron-containing catalysts examined in this paper are catocene, ferrocenecarboxaldehyde (FCA), ferrocene, and ferric oxide. Results of differential thermal analysis (DTA) and thermogravimetric analysis (TG) revealed that the catalysts play an important role in the decomposition of both AP and GAP. The peak decomposition temperature (T _m) of DTA curves and onset decomposition temperature (T _o) of TG patterns considerably shifted to a lower temperature as the concentration of catalysts increased in the propellants. The endothermic temperature of AP, however, is unaffected by the presence of burning rate catalysts in all cases. The activation energy of decomposition of the propellants in range of 80 to 120°C is determined, based on the MVST results.