Determination of Uric Acid and Norepinephrine by Chitosan‐Multiwall Carbon Nanotube Modified Electrode

A novel chemically modified electrode based on the chitosan‐multiwall carbon nanotube (MWNT) coated glassy carbon electrode (GCE) is described, which exhibited an attractive ability to determine uric acid (UA) and norepinephrine (NE) simultaneously. The responses of UA and NE merged into a large peak at a bare GCE, but yielded two well‐defined oxidation peaks at the chitosan‐MWNT modified GCE (MC/GCE). The experimental parameters were optimized, and a direct electrochemical method for the simultaneous determine for UA and NE is proposed. The MC/GCE showed good sensitivity, selectivity and stability.     

First radical cation salts of 2,5-bis(1,3-dithian-2-ylidene)-1,3,4,6-tetrathiapentalene (BDA-TTP) with copper(II) metal complex anions: β-(BDA-TTP)4Cu2Cl6 and (BDA-TTP)2CuCl4

New radical cation salts based on 2,5-bis(1,3-dithian-2-ylidene)-1,3,4,6-tetrathiapentalene (BDA-TTP) with copper(II) metal complex anions, β-(BDA-TTP)₄Cu₂Cl₆ and (BDA-TTP)₂CuCl₄, were synthesized and structurally characterized. Single crystals were prepared by electrochemical oxidation of BDA-TTP under galvanostatic conditions. X-ray diffraction study demonstrated that the salts have a layered structure, in which the conducting BDA-TTP layers alternate with the [Cu₂Cl₆]²⁻ or [CuCl₄]²⁻ anions. Both salts show the semiconductor-type temperature dependence of the conductivity. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 48–54, January, 2007.     

聚乳酸/壳聚糖纳米纤维结构形成的影响条件及其生物矿化活性

以二氧六环/冰醋酸为溶剂体系,采用相分离法制备了聚乳酸(PLA)/壳聚糖(CS)复合纳米纤维结构的组织工程支架,探讨了不同CS含量、不同凝胶温度及不同分子量对PLA/CS复合支架纳米纤维结构的影响以及支架的生物活性。结果表明,凝胶温度对PLA/CS复合材料的纳米纤维结构影响较大,且随着温度的降低,结构的微观尺寸也逐渐增大,从纳米级上升到普通的尺寸结构;CS含量对PLA/CS复合支架的基体结构影响不大;实验范围内PLA分子量对PLA/CS复合支架的纳米纤维结构有重要影响:分子量大的样品,较易得到PLA/CS复合纳米纤维结构的材料,而分子量小的样品则不能得到纳米纤维结构。另外,生物矿化实验表明CS的添加有利于PLA/CS复合材料生物活性的提高。     

Insoluble polystyrene-bound quaternary onium salt catalysts for the synthesis of cyclic carbonates by the reaction of oxiranes with carbon dioxide

The addition reaction of oxiranes ( 26a—e ) with carbon dioxide (CO₂) was performed using insoluble polystyrene beads containing pendant quaternary ammonium or phosphonium salts as catalysts under atmospheric pressure. The reaction of 26a—e with CO₂ proceeded smoothly catalyzed by 1–2 mol % of the polymer-supported quaternary onium salts to give the corresponding cyclic carbonates ( 27a—e ) in high yields at 80–90°C. In this reaction system, the catalytic activity of the polymer-supported quaternary onium salts was strongly affected by the following factors: degree of ring substitution (DRS) of the onium salt residues to the polymer, degree of crosslinking (DC) of the polystyrene beads, chain length of the alkylene spacer between the polymer back-bone and the onium salt, hydrophobicity of the alkyl group on the onium salts, and kind of onium salts. That is, the polymer-supported quaternary phosphonium salts with low DRS and DC and with long alkylene spacer chain were found to have higher catalytic activity than low molecualr weight quaternary onium salts. The above polymer-supported catalysts can easily be separated at the end of a reaction by filtration and can be reused for at least seven runs. It was also found that the rate of reaction was proportional to the products of catalyst concentration and oxirane concentration. © 1993 John Wiley & Sons, Inc.     

Synthesis of 4,5-diaminopyrrolo[1,2-a]quinoline derivatives by annulation of N,N-dialkyl[2-(pyrrol-1-yl)benzylidene]ammonium salts in the presence of an isocyanide

A facile synthetic method for 4,5-diaminopyrrolo[1,2-a]quinoline derivatives has been developed. Treatment of 2-(pyrrol-1-yl)benzaldehydes with secondary amine hydrochloride/NaI/TMSCl/Et₃N in the presence of an isocyano compound leads to the formation of 4-alkyl(or aryl)amino-5-dialkylaminopyrrolo[1,2-a]quinolines.     

Thermal latency of novel chelating borate catalysts as latent catalysts for epoxy–phenolic resins

Novel quaternary ammonium bis(2‐oxybenzoyloxy)borate salts ( 1a – 1c ) or quaternary ammonium bis(1,2‐benzenedioxy)borate salts ( 2a and 2b ) with tetra‐n‐butylammonium (TBA⁺), tetra‐n‐octylammonium (TOA⁺), or bis(triphenylphosphoranylidene)ammonium (PNP⁺) cations were synthesized as latent catalysts of epoxy/phenol–novolac resins by the complexation between boric acid and salicylic acid or catechol, followed by neutralization with quaternary ammonium hydroxide. Polyaddition reactions of diglycidyl ether of bisphenol A (DGEBA) and 4,4′‐bisphenol F (44BPF) or bisphenol F (BPF‐D) with the ammonium borates were investigated as model reactions of epoxy/phenol–novolac resin systems with respect to the thermal latency and storage stability of the catalyst. The polyaddition of DGEBA/44BPF with 1a – 1c in diglyme at 150 °C for 6 h proceeded up to 85–96% conversions and gave polymers with number‐average molecular weights of 4180–10,500, whereas the polyaddition at 80 °C for 6 h gave less than 8% conversions. However, the polyaddition with 2a containing TBA⁺ cation proceeded to only a 32% conversion at 150 °C for 6 h in diglyme and to a 64% conversion even at 180 °C for 6 h in triglyme and only gave low molecular weight oligomers, and no reaction proceeded in the polyaddition at 80 °C. However, polyaddition with 2b containing PNP⁺ cation proceeded up to a 96% conversion at 150 °C for 6 h in diglyme and gave a higher molecular weight polymer with a number‐average molecular weight of 8050, whereas the polyaddition at 80 °C for 6 h gave only a 5% conversion. The catalytic activity of ammonium borates 1a – 1c and 2a and 2b depended on the borate anion structure: 1a and 1c with bis(2‐oxybenzoyloxy)borate anion revealed higher activity than 2a and 2b with bis(1,2‐benzenedioxy)borate anion, respectively. In comparison with tetra‐n‐butylammonium bromide (TBAB) as a conventional ammonium salt or tetra‐n‐butylammonium tetrakis(benzoyloxy)borate (TBA‐TBB), 1a – 1c and 2b revealed better thermal latency. The catalytic activity of ammonium borates also depended on the bulkiness of the ammonium cation, and the order of activity was 1c (PNP⁺) > 1b (TOA⁺) ≧ 1a (TBA⁺) and 2b (PNP⁺) > 2a (TBA⁺). The storage stability of DGEBA/BPF‐D with the ammonium borate catalysts 1a – 1c and 2a and 2b in bulk at 40 °C was much better than that with TBAB and TBA‐TBB. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2702–2716, 2002     

烯烃的有机催化不对称环氧化反应

介绍了用手性酮，手性亚胺盐为催化剂以及手性胺为催化剂前体的新型有机催化不对称环氧化反应。     

氯化1-乙基-3-甲基烷基咪唑分子结构及其氢键作用能的密度泛函研究

采用量子化学密度范函方法计算研究了氯化1-乙基-3-甲基咪唑盐（[EMIM]C1）正负离子间相互作用的平衡构型和Cl^-离子从不同方位与咪唑阳离子的结合能．计算发现Cl^-可在咪唑环平面上结合形成离子键，其结合能为．368．97kJ／mol，还可与环上的三个H原子形成氢键，其氢键键长和结合能分别为0．2000nm／-378．03kJ／mol、0．2339nm／-344，69kJ／mol和0．2301nm／-346，01kJ／mol．结合能包括氢键作用能和正负离子的静电作用能，后者为主要贡献．从理论上展示了该离子液体的氢键结构．     

二甲胺修饰戊二醛交联壳聚糖树脂的制备及性能

研究了在均匀水相介质条件下，采用戊二醛稀溶液制备交联壳聚糖树脂的方法，并以三聚氯氰为活化剂，合成了二甲胺修饰戊二醛交联壳聚糖树脂．研究了该树脂的红外光谱及吸附性能．该树脂对铜(Ⅱ)和牛血清白蛋白(BSA)的吸附容量分别为42mg／g(干)和940mg／g(干)，其吸附行为均符合Freundlich等温吸附模型．该树脂制备工艺简单，机械强度较好，可作为金属离子或蛋白质分离纯化的吸附剂和色谱填料．     

用N-263从钒溶液中回收钒

测定了N－263对钒的饱和萃取容量，考察了萃取容量与溶液中钒阴离子离子状态的关系及各种因素对N－263萃取钒的影响，作了萃取平衡图，拟定了用萃取法从含钒溶液中提取钒的工艺流程。