AROMATIC AND HETEROCYCLIC NITRILES AND THEIR POLYMERS ⅩⅧ. THE POLYMERIZATION KINETICS OF BENZONITRILE CATALYZED BY METAL ACETYLACETONATE

The bulk polymerization of benzonitrile catalyzed by Co(Ⅱ), Co(Ⅲ) and Fe(Ⅲ) acetylacetonate was studied. The results of kinetics study show that the rate of polymerization was proportional to first power of the concentration of catalyst and second power of the concentration of monomer.     

丙烷直接氨氧化制丙烯腈催化剂的研究进展

丙烷直接氨氧化制丙烯腈是一条潜在的具有巨大经济效益的丙烯腈生产路线。本文概述了丙烷直接氨氧化制丙烯腈的催化反应机理，对丙烷直接氨氧化制丙烯腈的催化反应路径进行了归纳，同时对丙烷直接氨氧化制丙烯腈催化剂设计的思想以及日前所开发的几类丙烷直接氨氧化制丙烯腈催化剂体系加以了总结，重点介绍了锑酸盐和钼酸盐催化剂，对锑酸盐和钼酸盐催化剂活性相的结构、影响活性相形成的因素以及催化剂的结构与催化反应性能的关系等问题作了阐述。     

人工神经元网络辅助丙烷氨氧化催化剂设计

报道了利用人工神经元网络辅助丙烷氨氧化制丙烯腈催化剂设计的研究进展结果．通过筛选得到了可以拟合该反应体系的神经元网络模型，从而使丙烷转化率和丙烯腈选择性可以表示为催化剂组成的函数，利用培训后的神经元网络模型所得到的权值文件，结合作者自编的优化程序，该网络可用于预测最优的催化剂组成．实验得到丙烯腈收率和选择性可分别达到４３．０％和５６．２４％．     

钛胶的制备条件和物性关系

钛胶是新型有广泛用途的催化剂载体。本实验测定了钛胶的孔容、比表面积、铁含量和晶型结构；研究了钛胶的制备条件和物性关系，得到一些有实用价值的实验结果。     

Pt/HM和Pd/HM催化剂表面氧的恢复与供出活化能测定

催化氧化是最重要的工业催化反应之一。七十年代以来,关于氧化催化剂的基础研究取得了长足的进步,采用各种手段对氧化催化剂的表面及体相氧种进行了考察。本文作者根据研究实用氧化催化剂的经验,结合控制论方法,亦提出了多相催化氧化反应的集团结构适应性规律。近年来,作者用TPD和吸附平衡法研究了V_2O_5/SiO_2催化剂表面氧的种类、数目和供出活性,较好地关联了催化氧化的一些事实,使以上规律更趋于半定量化。在多相氧化反应中,催化剂表面活性氧不断处于供出和恢复的循环之中,催化剂表面氧中心的供     

Thermal degradation of polystyrene in the presence of hydrogen by catalyst in solution

For the first time, low temperature degradation (170-240 °C) of polystyrene in benzene is carried out in the presence of hydrogen using iron(III) oxide catalyst. The effect of temperature, catalyst loading and polymer loading on degradation are studied in hydrogen atmosphere. Degradation is also carried out at different initial hydrogen partial pressure. The time dependent molecular weight is calculated using viscosity average method. It is found that the degradation is enhanced considerably in the presence of hydrogen and followed random degradation chain scission. A random degradation kinetic model of Kelen [Kelen T. Polymer degradation. New York: Van Nostrand Reinhold Company; 1983.] is used to estimate the degradation rate constants. Empirical correlations are proposed to account for the effect of catalyst loading and initial hydrogen partial pressure on degradation. The true thermal degradation rate constants are calculated using these proposed correlations at given catalyst loading and initial hydrogen partial pressure with varying temperature. The frequency factor and activation energy are also determined using Arrhenius equation considering the true thermal degradation rate constants.     

铱(III)离子催化铈(IV)离子氧化四氢糠醇的动力学及机理

在酸性介质中用氧化还原滴定法研究了铈(IV)离子在痕量铱(III)离子催化作用下，于298~313 K区间氧化四氢糠醇(THFA)的反应动力学. 结果表明，反应对铈(IV)离子为一级，对铱(III)离子也为一级，对四氢糠醇的表观反应级数为正分数. 准一级速率常数kobs随[H+]增加而增大，而随[HSO₄－]增加而减小. 在氮气保护下，反应能引发丙烯腈聚合，说明在反应中有自由基产生. 通过kobs与[HSO₄－]的依赖关系，找到本反应体系的动力学活性物种是Ce(SO₄)₂，并计算出平衡常数，速控步骤的速率常数及相应的活化参数.     

Palladium catalyzed ligand-free Suzuki cross-coupling reactions of benzylic halides with aryl boronic acids under mild conditions

A highly efficient Suzuki cross-coupling reaction between benzylic halides and aryl boronic acids using palladium chloride as catalyst in acetone:water (3:1) as the solvent system has been developed. High yields of products, mild reaction conditions and short reaction times in the absence of ligand are important features of this method.     

Two-temperature dilute-acid prehydrolysis of hardwood xylan using a percolation process

This article outlines some of the factors influencing the choice of a suitable reactor for using immobilized biocatalysts. We have concentrated on biochemical engineering parameters of immobilized biocatalysts, which are important with respect to their application in industrial processes.     

Ester interchange reactions catalyzed by tin compounds in reactive processing: NMR contribution via reactions with model compounds

Interchange reactions involving esters were used in reactive processing with a view to obtaining polymer blends with stabilized morphology. Dibutyltinoxide (DBTO) appeared to be an excellent catalyst for these reactions. In fact, it was shown that the true catalytic entity is a dimeric alkoxy, acyloxy distannoxane entity formed in situ, during processing, by the reaction of the DBTO with the polymer ester groups. This compound was first obtained with model esters and characterized by multinuclear NMR analysis (¹H, ¹³C, ¹¹⁹Sn). The catalytic efficiency of the in situ polymeric distannoxane was compared with other added parent distannoxanes. Later on – still with model compounds – ligand exchanges at the tin sites were investigated and it was shown that these exchanges are not essential to the catalyst activity, but when they take place it increases the catalytic efficiency. Then, this type of catalysis was successfully used for interchange reactions in reactive extrusion of different polymer blends, some applications are briefly presented. To cite this article: M.-F. Llauro and A. Michel, C. R. Chimie 9 (2006).