Poly(fluorenevinylene) derivatives by Heck coupling: Synthesis,photophysics, and electroluminescence

Three new poly(fluorenevinylene) derivatives were synthesized, characterized, and used as emissive materials in light‐emitting diodes (LEDs). They were synthesized by Heck coupling of 9,9‐dihexyl‐2,7‐divinylfluorene with 2,7‐dibromo‐9,9‐dihexylfluorene, 2,3‐bis(4‐bromophenyl)quinoxaline, or 2,5‐bis(4‐bromophenyl)‐3,4‐diphenylthiophene to afford the polymers F , Q , and T , respectively. Polymers F and Q had medium number–average molecular weights (M_n ? 14,000) with relatively narrow polydispersity (1.3–1.6), while T was obtained as an oligomer (M_n ? 4000). All polymers were soluble in common organic solvents, such as tetrahydrofuran (THF), chloroform, dichloromethane, and toluene. They emitted blue‐greenish fluorescence light in dilute THF solution (444–491 nm), with photoluminescence (PL) quantum yields of 0.32–0.54, and in thin film (453–488 nm). LEDs with the configuration of ITO/PEDOT‐PSS/Polymer/Li:Al were fabricated and evaluated. The electroluminescence (EL) spectra of the Q and F polymers were very broad covering the blue–green–red region, whereas the spectrum of the polymer T was almost purely blue. The threshold electrical field for light emission of the devices was almost the same (?1.75 MV/cm). The external quantum efficiency of the devices of polymers Q and F was about 1.0 × 10^?3%, whereas that of polymer T was ?3.0 × 10^?5%. The fluorescence lifetime of polymers F and Q was significantly longer than that of the polymer T . © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4494–4507, 2006     

Periodic Oscillations of Luminescence Intensity at the Formation of Anodic Oxides on Aluminum in Oxalic Acid

The electroluminescence phenomenon observed during the formation of porous anodic oxide films on aluminum in oxalic acid solutions is studied. Periodic changes in the luminescence intensity arise during the transition from the barrier-film formation to the steady-state growth of porous oxide. The period and number of oscillations are determined by the oxidation voltage.     

Selective Introduction of Carbazole and Diphenylamine into Spirofluorenexanthene Core for Different Phosphorescent Hosts

Built on the spiro[fluorene‐9,9′‐xanthene] (SFX) core and two frequently‐used hole‐transporting groups such as carbazole and diphenylamine, two SFX derivatives, namely SFXCz and SFXDPA, have been synthesized by one‐step reaction for red, green and blue phosphorescent organic light‐emitting devices (PHOLEDs). Though the properties of these two groups are very similar, the devices based on SFXCz and SFXDPA exhibit distinct performances. In blue PHOLEDs, the device based on SFXCz exhibited much better performances than that based on SFXDPA. However, the latter was superior to the former in green and red PHOLEDs. And the red PHOLED based on SFXDPA exhibited maximum current efficiency (CE) of 27.1 cd·A^?1, power efficiency (PE) of 25.0 lm·W^?1, and external quantum efficiency (EQE) of 15.0%. The results show that the introduction of diphenylamine group is suitable for constructing green and red host materials, whereas the introduction of carbazole group is suitable for constructing blue host materials.     

Blue phase liquid crystals affected by graphene oxide modified with aminoazobenzol group

Liquid-crystalline blue phases (BPs) are stable only for very narrow temperature range between the isotropic and the chiral nematic phase that severely hinders their applicability. Herein, the aminoazobenzol group was chemically grafted onto epoxy group of graphene oxide (GO) via addition reaction. Successful grafting of aminoazobenzol group was confirmed using X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), UV–vis absorption spectra and thermogravimetric analysis (TGA). The resultant aminoazobenzol group–modified GO sheets, which is reduced (RGO-Az), were easily redispersable in common organic solvents or liquid crystals (LCs). By doping different contents of RGO-Az, nanosheets could stabilise BP and increase the BP range. When doped with 0.5 wt% RGO-Az, the mixtures show the wider range with 5.9°C than the range with 3.6°C of BPLCs without RGO-Az. Meanwhile, the phase sequence and the range of the aforementioned phases are reproducible upon heating and cooling, which shows that the BPs doped with RGO-Az nanosheets are thermodynamically stable.     

量子垒结构对Si衬底GaN基绿光LED光电性能的影响

在Si衬底上外延生长了3种不同量子垒结构的绿光外延片并制作成垂直结构芯片,3种量子垒结构分别为Ga N、In0.05Ga0.95N/Al0.1Ga0.9N/In0.05Ga0.95N、In0.05Ga0.95N/Ga N/In0.05Ga0.95N,对应的3种芯片样品为A、B、C,研究了3种样品的变温电致发光特性。垒结构的改变虽然对光功率影响很小,但是在光谱性能上会引起显著改变,结果如下:在低温(13 K)大电流下,随着电流密度的增大,样品的EL谱峰值波长蓝移更为显著,程度依次为BA≈C;在高温(300 K)小电流下,随着电流密度的增大,样品EL谱的峰值波长蓝移程度的大小依次为ABC。在同一电流下,随着温度的升高,样品在大部分电流下的EL谱峰值波长出现"S"型波长漂移,在极端电流下又表现出不同的漂移情况。这些现象与局域态、应力、压电场、禁带宽度等因素有关。     

Sonophotocatalytic degradation of trypan blue and vesuvine dyes in the presence of blue light active photocatalyst of Ag3PO4/Bi2S3-HKUST-1-MOF: Central composite optimization and synergistic effect study

An efficient simultaneous sonophotocatalytic degradation of trypan blue (TB) and vesuvine (VS) using Ag₃PO₄/Bi₂S₃-HKUST-1-MOF as a novel visible light active photocatalyst was carried out successfully in a continuous flow-loop reactor equipped to blue LED light. Ag₃PO₄/Bi₂S₃-HKUST-1-MOF with activation ability under blue light illumination was synthesized and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray (EDX), photoluminescence (PL) and diffuse reflectance spectra (DRS). The effect of operational parameters such as the initial TB and VS concentration (5–45 mg/L), flow rate (30–110 mL/min), irradiation and sonication time (10–30 min), pH (3–11) and photocatalyst dosage (0.15–0.35 g/L) has been investigated and optimized using central composite design (CCD) combined with desirability function (DF). Maximum sonophotodegradation percentage (98.44% and 99.36% for TB and VS, respectively) was found at optimum condition set as: 25 mg/L of each dye, 70 mL/min of solution flow rate, 25 min of irradiation and sonication time, pH 6 and 0.25 g/L of photocatalyst dosage. At optimum conditions, synergistic index value was obtained 2.53 that indicated the hybrid systems including ultrasound irradiation and photocatalysis have higher efficiency compared with sum of the individual processes.     

Electro-optical properties of carbon nanotube-doped polymer-stabilised blue phase liquid crystal IPS cell

Carbon nanotube (CNT)-doped polymer-stabilised blue phase (PSBP) liquid crystal cells driven by an in-plane field are fabricated. Their electro-optical properties are investigated for both single-wall and multiwall CNT dopants. A small amount of CNT dopants in PSBP liquid crystals leads to broadening the blue phase temperature range over 42°C and stabilising the reflection wavelength against temperature changes. A lower Kerr constant and threshold voltage are obtained for a higher CNT concentration. Higher CNT concentrations lead to an increase in the elastic constant; therefore, the rise time of CNT-doped PSBP liquid crystal cells increases and decay time decreases.     

Photochromic Polyoxoniobates with Photoinduced “D-f-A” Electron Transfer Mechanism

Compounds with redox activities have appealing applications in catalytic, electronic and magnetic properties, but the redox inert of polyoxoniobates (PONbs) significantly limits their applications for a long time. In this work, we are able to integrate organophosphate and lanthanide cluster into PONb to create the first family of inorganic-organic hybrid organophosphate-Ln-PONb composite clusters. These novel species not only present the first family of redox active PONbs that can be reduced to form long-lived “heteropoly blues” under ambient conditions, but also a new photochromic system. More importantly, the analyses of the electronic configurations and photochromic properties for a series of designed proof-of-concept PONbs models allow us to discover a D-f-A electron transfer mechanism, that is, photoinduced electron is transferred from a photosensitive organophosphate electron donor (D) to the Nb^V electron acceptor (A) through the unoccupied 4 f-orbitals of Ln (f). This work paves the way for developing diverse PONb-based redox materials and expanding the possibility of the applications of PONbs in the redox chemistry.     

Gallium Sulfide Quantum Dots with Zinc Sulfide and Alumina Shells Showing Efficient Deep Blue Emission

Solution-processed quantum dot (QD) based blue emitters are of paramount importance in the field of optoelectronics. Despite large research efforts, examples of efficient deep blue/near UV-emitting QDs remain rare due to lack of luminescent wide band gap materials and high defect densities in the existing ones. Here, we introduce a novel type of QDs based on heavy metal free gallium sulfide (Ga₂S₃) and their core/shell heterostructures Ga₂S₃/ZnS as well as Ga₂S₃/ZnS/Al₂O₃. The photoluminescence (PL) properties of core Ga₂S₃ QDs exhibit various decay pathways due to intrinsic defects, resulting in a broad overall PL spectrum. We show that the overgrowth of the Ga₂S₃ core QDs with a ZnS shell results in the suppression of the intrinsic defect-mediated states leading to efficient deep-blue emission at 400 nm. Passivation of the core/shell structure with amorphous alumina yields a further enhancement of the PL quantum yield approaching 50 % and leads to an excellent optical and colloidal stability. Finally, we develop a strategy for the aqueous phase transfer of the obtained QDs retaining 80 % of the initial fluorescence intensity.