Sonocatalytic degradation of methylene blue by a novel graphene quantum dots anchored CdSe nanocatalyst

Cadmium selenide/graphene quantum dots (CdSe/GQDs) nanocatalyst with small band gap energy and a large specific surface area was produced via a facile three-step sonochemical-hydrothermal process. The features of the as-prepared CdSe, GQDs and CdSe/GQDs samples were characterized by photoluminescence spectroscopy (PL), scanning electron microscopy (SEM), energy dispersive X-ray (EDX), X-ray diffraction (XRD), Fourier transformed infrared (FT-IR), diffuse-reflectance spectrophotometer (DRS), and Brunauer–Emmett–Teller (BET) analysis. The sonocatalytic activity of the synthesized CdSe/GQDs was effectively accelerated compared with that of pure CdSe nanoparticles in degradation of methylene blue (MB). The influence of the CdSe/GQDs dosage (0.25–1.25 g/L), initial MB concentration (20–30 mg/L), initial solution pH (3–12), and ultrasonic output power (200–600 W/L) were examined on the sonocatalytic treatment of MB aqueous solutions. The degradation efficiency (DE%) of 99% attained at 1 g/L of CdSe/GQDs, 20 mg/L of MB, pH of 9, and an output power of 200 W/L at 90 min of ultrasonic irradiation. Furthermore, DE% increased with addition of K₂S₂O₈ and H₂O₂ as the enhancers via producing more free radicals. However, addition of sulfate, carbonate, and chloride as radical sweeper decreased DE%. Furthermore, well-reusability of the CdSe/GQDs sonocatalyst was demonstrated for 5 successive runs and some of the sonocatalytic generated intermediates were indicated by GC–MS analysis.     

Microwave synthesis of nitrogen doped Ti4O7 for photocatalytic applications

The nitrogen (N) doped Ti₄O₇ photocatalyst was prepared from urea as a nitrogen source by a microwave method. The resulting photocatalyst was characterized by X-ray diffraction (XRD), Field Emission Scanning electron microscopy (FESEM), Fourier transform infrared spectroscopy (FTIR), UV–visible diffuse reflectance spectroscopy (UV–Vis DRS) and UV–vis spectroscopy (UV–Vis). 0.1 M N doped Ti₄O₇ photocatalyst exhibited methylene blue decomposition efficiency of 100% which was prepared by microwave treatment for above 30 min. Rate constant was found to be 0.028910 min⁻¹ in the first order kinetic.     

Sonochemically preparation and characterization of bimetallic Ni-Co/Al2O3-ZrO2 nanocatalyst: Effects of ultrasound irradiation time and power on catalytic properties and activity in dry reforming of CH4

The catalytic performance of nanostructured Ni-Co/Al₂O₃-ZrO₂ catalysts, prepared by ultrasound-assisted impregnation method was examined in the dry reforming of methane. The effect of irradiation power and irradiation time have been studied by changing time (0, 20, 80 min) and power of the sonication (30, 60, 90 W) during the synthesis which resulted in different physiochemical properties of the nanocatalyst. The nanocatalysts were characterized by XRD, FESEM, PSD, EDX, TEM, TPR-H₂, BET, FTIR and TG analyses. Based on the characterization results, ultrasound treatment endowed the sample with more uniform and smaller nanoparticles; higher surface area, stronger metal-support interaction and more homogenous dispersion. Moreover, the analyses exhibited smaller particles with higher surface area and less population of particle aggregates at longer and highly irradiated nanocatalysts. The nanocatalyst irradiated at 90 W for 80 min (the longest irradiation time and the most intense power) showed a uniform morphology and a very narrow particles size distribution. More than 65% of particles of this nanocatalyst were in the range of 10–30 nm. Activity tests demonstrated that employing ultrasound irradiation during impregnation improves feed conversion and products yield, reaching values close to equilibrium. Among sonicated nanocatalysts, with increasing power and time of irradiation, the nanocatalyst represents higher activity. The superior performance amongst the various bimetallic catalysts tested was observed over the catalyst with 90 W and 80 min ultrasonic irradiation which is stable in 24 h time on stream test. The excellent anti-coking performance of this bimetallic catalyst, confirmed by TG and FESEM analyses of spent catalyst, is closely related to the promoting effect of sonication on the metal-support interaction, Ni dispersion and particle size; and probably, the synergy between metallic species.     

Engineering birnessite-type MnO2 nanosheets on fiberglass for pH-dependent degradation of methylene blue

We construct hierarchical MnO₂ nanosheets @ fiberglass nanostructures via one-pot hydrothermal method without any surfactants. The morphology and structure of MnO₂-modified fiberglass composites are examined by focus ion beam scanning electron microscopy (FIB/SEM), X-Ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR). The birnessite-type MnO₂ nanosheets are observed to grow vertically on the surface of fiberglass. Furthermore, the birnessite-type MnO₂-fiberglass composites exhibit good ability for degradation of methylene blue (MB) in different pH levels. In neutral solution (pH 6.5–7.0), it achieves a high removal rate of 96.1% (2 h, at 60 °C) in the presence of H₂O₂; and in acidic environment (pH 1.5), 96.8% of MB solution (20 mg/L, 100 mL) is decomposed by oxidation within only 5 min. In principles, the rational design of MnO₂ nanosheets-decorated fiberglass architectures demonstrated the suitability of the low-cost MnO₂-modified fiberglass nanostructure for water treatment.     

Ultrasonic synthesis and photocatalytic characterization of H3PW12O40/TiO2 (anatase)

A novel H₃PW₁₂O₄₀/TiO₂ (anatase) composite photocatalyst was prepared by a high-intensity ultrasonic method using a lower temperature (80 °C) and was characterized by XRD and FT-IR. Its photocatalytic activity, using solar light, was evaluated through the degradation of organic dye methylene blue (MB) in aqueous. When MB solution (50 mg/l, 200 ml) containing H₃PW₁₂O₄₀/TiO₂ (anatase) (0.4 g) was degraded by solar irradiation after 90 min, the removal of concentration and TOC of MB reached 95% and 73%, respectively. The photocatalyst activity of H₃PW₁₂O₄₀/TiO₂ (anatase) was much higher than TiO₂ which was prepared in the same way. H₃PW₁₂O₄₀/TiO₂ remained efficient after five repeated experiments.     

Enhanced sonocatalytic degradation of organic dyes from aqueous solutions by novel synthesis of mesoporous Fe3O4-graphene/ZnO@SiO2 nanocomposites

Fe₃O₄-graphene/ZnO@mesoporous-SiO₂ (MGZ@SiO₂) nanocomposites was synthesized via a simple one pot hydrothermal method. The as-obtained samples were investigated using various techniques, as follows: scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and specific surface area (BET) vibrating sample magnetometer (VSM), among others. The sonocatalytic activities of the catalysts were tested according to the oxidation for the removal of methylene blue (MB), methyl orange (MO), and rhodamine B (RhB) under ultrasonic irradiation. The optimal conditions including the irradiation time, pH, dye concentration, catalyst dosage, and ultrasonic intensity are 60 min, 11, 50 mg/L, 1.00 g/L, and 40 W/m², respectively. The MGZ@SiO₂ showed the higher enhanced sonocatalytic degradation from among the three dyes; furthermore, the sonocatalytic-degradation mechanism is discussed. This study shows that the MGZ@SiO₂ can be applied as a novel-design catalyst for the removal of organic pollutants from aqueous solutions.     

Preparation of cube micrometer potassium niobate (KNbO3) by hydrothermal method and sonocatalytic degradation of organic dye

Cube micrometer potassium niobate (KNbO₃) powder, as a high effective sonocatalyst, was prepared using hydrothermal method, and then, was characterized by X-ray diffractometer (XRD), scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX). In order to evaluate the sonocatalytic activity of prepared KNbO₃ powder, the sonocatalytic degradation of some organic dyes was studied. In addition, some influencing factors such as heat-treatment temperature and heat-treatment time on the sonocatalytic activity of prepared KNbO₃ powder and catalyst added amount and ultrasonic irradiation time on the sonocatalytic degradation efficiency were examined by using UV–visible spectrophotometer and Total Organic Carbon (TOC) determination. The experimental results showed that the best sonocatalytic degradation ratio (69.23%) of organic dyes could be obtained when the conditions of 5.00 mg/L initial concentration, 1.00 g/L prepared KNbO₃ powder (heat-treated at 400 °C for 60 min) added amount, 5.00 h ultrasonic irradiation (40 kHz frequency and 300 W output power), 100 mL total volume and 25–28 °C temperature were adopted. Therefore, the micrometer KNbO₃ powder could be considered as an effective sonocatalyst for treating non- or low-transparent organic wastewaters.     

Ultrasonic-assistant fabrication of cocoon-like Ag/AgFeO2 nanocatalyst with excellent plasmon enhanced visible-light photocatalytic activity

The AgFeO₂ delafossite was reported as a potential photocatalyst as well as its intense recombination rate of photogeneration charge carriers. In this work, we utilized plasmon modification method to enhance the photocatalytic activity of AgFeO₂. Silkworm cocoon like Ag/AgFeO₂ nanocatalyst was synthesized by an ultrasonic enhanced reduction method. XRD, HRTEM and XPS results demonstrated the well dispersed Ag⁰ on the surface of AgFeO₂. Under visible light irradiation, 20 mg/L of ARG solution was completely degraded by 0.25 g/L of Ag/AgFeO₂ photocatalyst with pseudo-first-order rate of 0.040 min⁻¹. The inducement of the prominently enhanced photocatalytic activity of Ag/AgFeO₂ was deeply analyzed. Significant decreased intensity of photoluminescence (PL) spectra suggested the superior separation of photo-induced electrons and holes of Ag/AgFeO₂ as compared to that of AgFeO₂. The free h⁺ was confirmed as the dominant active species for the pollutant degradation. Ultimately, the photodegradation mechanism was proposed and discussed.     

A simultaneous,direct microwave/ultrasound-assisted digestion procedure for the determination of total Kjeldahl nitrogen

Simultaneous direct irradiation with microwaves and ultrasound was used to determine total Kjeldahl nitrogen. The method involves chemical digestion in two steps, mineralization with sulfuric acid and oxidation with H₂O₂. The most influential variables for the microwave/ultrasound (MW/US)-assisted digestion were optimized using tryptophan as the model substance. The optimum conditions were: H₂SO₄ volume, 10 mL; H₂O₂ volume, 5 mL; weight of sample, 0.05 g; MW power, 500 W; US power, 50 W; digestion time, 7 min (i.e., 5 min mineralization and 2 min oxidation). A modification of the classical Kjeldahl (Hach) method and an US-assisted digestion method were used for comparison. The latter was also optimized; the optimum conditions were: H₂SO₄ volume, 10 mL; H₂O₂ volume, 5 mL; sonication time with H₂SO₄, 15 min; sonication time with H₂O₂,10 min; US power, 50 W; weight of sample, 0.05 g. Five pure amino acids and two certified reference materials (NIST standard reference materials 1547 (peach leaves), and soil, NCS DC 73322) were analyzed to assess the accuracy of our new MW/US-assisted digestion method, that was successfully applied to five real samples. The significant reduction in digestion time (being 30 min and 25 min for classical Kjeldahl and US-assisted digestion methods, respectively) and consumption of reagents show that simultaneous and direct MW/US irradiation is a powerful and promising tool for low-pressure digestion of solid and liquid samples.     

Sonochemical synthesis of two nanostructured silver(I) coordination polymers based on semi-rigid bis(benzimidazole) ligands

Nanoparticles of two silver(I) coordination polymers (CPs), [Ag₂(L1)₂(DCTP)]_n (1) and [Ag₂(L2)(DCTP)]_n (2) (L1 = 1,3-bis(5,6-dimethylbenzimidazol-1-ylmethyl)benzene, L2 = 1,4-bis(benzimidazol-1-yl)-2-butene, H₂DCTP = 2,5-dichloroterephthalic acid), were synthesized by the sonochemical approach and hydrothermal method. Both CPs were characterized by elemental analysis, IR spectra, single-crystal X-ray diffraction, scanning electron microscopy (SEM), and thermogravimetric analyses (TGA). CP 1 exhibits a 2D 4-connected sql net with the point symbol {4⁴.6²}. While CP 2 displays a 2D 3,4-connected 3,4L13 net with the point symbol {4.6²}₂{4².6².8²}. The structural diversity indicates that semi-rigid bis(benzimidazole) co-ligands play important roles in tuning the structures of the mixed Ag(I) CPs. The ultrasound irradiation time, temperature, and power showed significant effects on the morphology and growth process of the nanoparticles of two silver(I) CPs. The luminescence and photocatalytic properties of the nanoparticles of CPs 1–2 on the degradation of methyl blue (MB) were also investigated in detail.     

Optimization of the ultrasonic assisted removal of methylene blue by gold nanoparticles loaded on activated carbon using experimental design methodology

The present study was focused on the removal of methylene blue (MB) from aqueous solution by ultrasound-assisted adsorption onto the gold nanoparticles loaded on activated carbon (Au-NP-AC). This nanomaterial was characterized using different techniques such as SEM, XRD, and BET. The effects of variables such as pH, initial dye concentration, adsorbent dosage (g), temperature and sonication time (min) on MB removal were studied and using central composite design (CCD) and the optimum experimental conditions were found with desirability function (DF) combined response surface methodology (RSM). Fitting the experimental equilibrium data to various isotherm models such as Langmuir, Freundlich, Tempkin and Dubinin–Radushkevich models show the suitability and applicability of the Langmuir model. Analysis of experimental adsorption data to various kinetic models such as pseudo-first and second order, Elovich and intraparticle diffusion models show the applicability of the second-order equation model. The small amount of proposed adsorbent (0.01 g) is applicable for successful removal of MB (RE > 95%) in short time (1.6 min) with high adsorption capacity (104–185 mg g⁻¹).     

Rapid ultrasound-assisted magnetic microextraction of gallic acid from urine,plasma and water samples by HKUST-1-MOF-Fe3O4-GA-MIP-NPs: UV–vis detection and optimization study

Magnetite (Fe₃O₄ nanoparticles (NPs)) HKUST-1 metal organic framework (MOF) composite as a support was used for surface imprinting of gallic acid imprinted polymer (HKUST-1-MOF-Fe₃O₄-GA-MIP) using vinyltrimethoxysilane (VTMOS) as the cross-linker. Subsequently, HKUST-1-MOF-Fe₃O₄-NPs-GA-MIP characterized by FT-IR, XRD and FE-SEM analysis and applied for fast and selective and sensitive ultrasound assisted dispersive magnetic solid phase microextraction of gallic acid (GA) by UV–Vis (UA-DMSPME-UV-Vis) detection method. Plackett–Burman design (PBD) and central composite design (CCD) according to desirability function (DF) indicate the significant variables among the extraction factors vortex (mixing) time (min), sonication time (min), temperature (°C), eluent volume (L), pH and HKUST-1-MOF-Fe₃O₄-NPs-GA-MIP mass (mg) and their contribution on the response. Optimum conditions and values correspond to pH, HKUST-1-MOF-Fe₃O₄-NPs-GA-MIP mass, sonication time and the eluent volume were set as follow 3.0, 1.6 mg, 4.0 min and 180 μL, respectively. The average recovery (ER%) of GA was 98.13% with desirability of 0.997, while the present method has best operational performance like wide linear range 8–6000 ng mL⁻¹ with a Limit of detection (LOD) of 1.377 ng mL⁻¹, limit of quantification (LOQ) 4.591 ng mL⁻¹ and precision (<3.50% RSD). The recovery of GA in urine, human plasma and water samples within the range of 92.3–100.6% that strongly support high applicability of present method for real samples analysis, which candidate this method as promise for further application.     

Broadband infrared luminescence in Yb-doped Bi2O3–GeO2 glasses

The Yb-doped Bi₂O₃–GeO₂ glasses were prepared by the conventional melt quenching technique. Near-infrared (NIR) broadband emission was found at about 1024 nm, and 1330 nm (under 785 nm excitation), and the measured fluorescent lifetime was about several hundred microseconds. The emission intensity of Yb-doped Bi₂O₃–GeO₂ glasses increased with increasing of Yb dopant in our experiments. The NIR emission should be related to Yb³⁺ and lower valence Bi ions.     

Optical temperature sensor through infrared excited blue upconversion emission in Tm3 +/Yb3 + codoped Y2O3

An analysis of the intense blue upconversion emission at 476 and 488 nm in Tm^3 +/Yb^3 + codoped Y₂O₃ under excitation power density of 86.7 W/cm² available from a diode laser emitting at 976 nm, has been undertaken. Fluorescence intensity ratio (FIR) variation of temperature-sensitive blue upconversion emission at 476 and 488 nm in this material was recorded in the temperature range from 303 to 753 K. The maximum sensitivity derived from the FIR technique of the blue upconversion emission is approximately 0.0035 K^? 1. The results imply that Tm^3 +/Yb^3 + codoped Y₂O₃ is a potential candidate for the optical temperature sensor.     

Ultrasound assisted combined molecularly imprinted polymer for selective extraction of nicotinamide in human urine and milk samples: Spectrophotometric determination and optimization study

Ultrasound-assisted dispersive solid phase microextraction followed by UV–vis spectrophotometer (UA-DSPME-UV–vis) was designed for extraction and preconcentration of nicotinamide (vitamin B₃) by HKUST-1 metal organic framework (MOF) based molecularly imprinted polymer (MIP). This new material was characterized by FTIR and FE-SEM techniques. The preliminary Plackett–Burman design was used for screening and subsequently the central composite design justifies significant terms and possible construction of mathematical equation which give the individual and cooperative contribution of variables like HKUST-1-MOF-NA-MIP mass, sonication time, temperature, eluent volume, pH and vortex time. Accordingly the optimum condition was set as: 2.0 mg HKUST-1-MOF-NA-MIP, 200 μL eluent and 5.0 min sonication time in center points other variables were determined as the best conditions to reach the maximum recovery of the analyte. The UA-DSPME-UV–vis method performances like excellent linearity (LR), limits of detection (LOD), limits of quantification of 10–5000 μg L⁻¹ with R² of 0.99, LOD (1.96 ng mL⁻¹), LOQ (6.53 μg L⁻¹), respectively show successful and accurate applicability of the present method for monitoring analytes with within- and between-day precision of 0.96–3.38%. The average absolute recoveries of the nicotinamide extracted from the urine, milk and water samples were 95.85–101.27%.     

Sonoelectrocatalytic decomposition of methylene blue using Ti/Ta2O5–SnO2 electrodes

Sonoelectrochemical decomposition of organic compounds is a developing technique among advanced oxidation processes (AOPs). It has the advantage over sonication alone that it increases the efficiency of the process in terms of a more rapid decrease in chemical oxygen demand (COD) and in total organic carbon (TOC) and accelerates electrochemical oxidation which normally requires a lengthy period of time to achieve significant mineralisation. Moreover the use of an electrocatalytic electrode in the process further accelerates the oxidation reaction rates. The aim of this study was to improve the decomposition efficiency of methylene blue (MB) dye by sonoelectrochemical decomposition using environmentally friendly and cost-effective Ti/Ta₂O₅–SnO₂ electrodes. Decolourisation was used to assess the initial stages of decomposition and COD together with TOC was used as a measure of total degradation. The effect of a range of sonication frequencies 20, 40, 380, 850, 1000 and 1176 kHz at different powers on the decolourisation efficiency of MB is reported. Frequencies of 850 and 380 kHz and the use of higher powers were found more effective towards dye decolourisation. The time for complete MB degradation was reduced from 180 min using electrolysis and from 90 min while carrying out sonolysis to 45 min when conducting a combined sonoelectrocatalytic experiments. The COD reduction of 85.4% was achieved after 2 h of combined sonication and electrolysis which is a slightly higher than after a single electrolysis (78.9%) and twice that of sonolysis (40.4%). A dramatic improvement of mineralisation values were observed within 2 h of sonoelectrocatalytic MB degradation. The TOC removal efficiency increased by a factor of 10.7 comparing to sonication alone and by a factor of 1.5 comparing to the electrolytic process. The energy consumption (kWh/m³) required for the complete degradation of MB was evaluated.     

Ultrasonic assisted synthesis of Bikitaite zeolite: A potential material for hydrogen storage application

Li containing Bikitaite zeolite has been synthesized by an ultrasound-assisted method and used as a potential material for hydrogen storage application. The Sonication energy was varied from 150 W to 250 W and irradiation time from 3 h to 6 h. The Bikitaite nanoparticles were characterized by X-ray diffraction (XRD), infrared (IR) spectral analysis, and field-emission scanning electron microscopy (FESEM) thermo-gravimetrical analysis and differential thermal analysis (TGA, DTA). XRD and IR results showed that phase pure, nano crystalline Bikitaite zeolites were started forming after 3 h irradiation and 72 h of aging with a sonication energy of 150 W and nano crystalline Bikitaite zeolite with prominent peaks were obtained after 6 h irradiation of 250 W sonic energy. The Brunauer–Emmett–Teller (BET) surface area of the powder by N₂ adsorption–desorption measurements was found to be 209 m²/g. The TEM micrograph and elemental analysis showed that desired atomic ratio of the zeolite was obtained after 6 h irradiation. For comparison, sonochemical method, followed by the hydrothermal method, with same initial sol composition was studied. The effect of ultrasonic energy and irradiation time showed that with increasing sonication energy, and sonication time phase formation was almost completed. The FESEM images revealed that 50 nm zeolite crystals were formed at room temperature. However, agglomerated particles having woollen ball like structure was obtained by sonochemical method followed by hydrothermal treatment at 100 °C for 24 h. The hydrogen adsorption capacity of Bikitaite zeolite with different Li content, has been investigated. Experimental results indicated that the hydrogen adsorption capacities were dominantly related to their surface areas as well as total pore volume of the zeolite. The hydrogen adsorption capacity of 143.2 c.c/g was obtained at 77 K and ambient pressure of (0.11 MPa) for the Bikitaite zeolite with 100% Li, which was higher than the reported values for other zeolites. To the best of our knowledge, there is no report on the synthesis of a Bikitaite zeolite by sonochemical method for H₂ storage.     

Synthesis of nanocomposites of iron oxide/gold (Fe3O4/Au) loaded on activated carbon and their application in water treatment by using sonochemistry: Optimization study

This paper focuses on the finding best operational conditions using response surface methodology (RSM) for Rhodamine123 (R123) and Disulfine blue (DSB) dyes removal by ultrasound assisted adsorption onto Au-Fe₃O₄ nanoparticles loaded on activated carbon (Au-Fe₃O₄ NPs-AC). The influences of variables such as initial R123 (X₁) and DSB concentration (X₂), pH (X₃), adsorbent mass (X₄) and sonication time (X₅) on their removal were investigated by small central composite design (CCD) under response surface methodology. The significant variables and the possible interactions among variables were investigated and estimated accordingly. The best conditions were set as: 4 min, 4.0, 0.025 g, 13.5 and 26.5 mg L⁻¹ for sonication time, pH, adsorbent weight, initial R123 and DSB concentration, respectively. At above conditions, the adsorption equilibrium and kinetic follow the Langmuir isotherm and pseudo-second-order kinetic model, respectively. The maximum monolayer capacity (Q_max) of 71.46 and 76.38 mg g⁻¹ for R123 and DSB show sufficiency of model for well presentation of experimental data.     

Development of an empirical kinetic model for sonocatalytic process using neodymium doped zinc oxide nanoparticles

The degradation of Acid Blue 92 (AB92) solution was investigated using a sonocatalytic process with pure and neodymium (Nd)-doped ZnO nanoparticles. The nanoparticles were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). The 1% Nd-doped ZnO nanoparticles demonstrated the highest sonocatalytic activity for the treatment of AB92 (10 mg/L) with a degradation efficiency (DE%) of 86.20% compared to pure ZnO (62.92%) and sonication (45.73%) after 150 min. The results reveal that the sonocatalytic degradation followed pseudo-first order kinetics. An empirical kinetic model was developed using nonlinear regression analysis to estimate the pseudo-first-order rate constant (k_app) as a function of the operational parameters, including the initial dye concentration (5–25 mg/L), doped-catalyst dosage (0.25–1 g/L), ultrasonic power (150–400 W), and dopant content (1–6% mol). The results from the kinetic model were consistent with the experimental results (R² = 0.990). Moreover, DE% increases with addition of potassium periodate, peroxydisulfate, and hydrogen peroxide as radical enhancers by generating more free radicals. However, the addition of chloride, carbonate, sulfate, and t-butanol as radical scavengers declines DE%. Suitable reusability of the doped sonocatalyst was proven for several consecutive runs. Some of the produced intermediates were also detected by GC–MS analysis. The phytotoxicity test using Lemna minor (L. minor) plant confirmed the considerable toxicity removal of the AB92 solution after treatment process.     

Photocatalytic water splitting of La2AlTaO7 and the effect of aluminum on the electronic structure

A new photocatalyst La₂AlTaO₇ with orthorhombic structure was synthesized by the solid-state reaction method. The formation rate of H₂ evolution from CH₃OH/H₂O solution under the irradiation of a 350 W high-pressure Hg lamp is about 108.9 μmol h^?1 for La₂AlTaO₇ (0.1 g). It also showed activity leading to the decomposition of pure water into H₂ and O₂ even in the absence of co-catalysts under UV light irradiation. The photocatalyst loaded with 0.2 wt% NiO co-catalyst was found to have the highest activity. It was found from the electronic band structure study, using the density functional theory (DFT) with plane-wave basis, that the valence band top mainly consists of O 2p orbitals and the conduction band bottom is mainly constructed of Al 3s3p. The effect of aluminum on electronic structure was discussed in close connection with the UV–vis absorption spectrum.