PDMS-Au复合基底上多环芳烃分子的表面增强拉曼光谱

利用聚二甲基硅氧烷(PDMS)对有机物的富集功能,通过在金纳米粒子单层膜(Au MLF)表面旋涂薄层PDMS膜制备PDMS-Au MLF复合表面增强拉曼光谱(SERS)基底.研究了SERS增强性能与旋涂液浓度及稀释溶剂间的关系,考察了复合基底增强活性的均匀性.研究发现,采用叔丁醇为稀释溶剂,浓度为2%(质量分数)的旋涂液时所得复合基底表面多环芳烃(PAHs)的SERS信号强度最高,且此基底SERS信号强度偏差小于10%.分别以PDMS-Au MLF复合材料和Au MLF作为基底,对比研究了对萘、蒽、菲和芘4种多环芳烃的SERS检测能力.结果表明,PDMS-Au MLF复合基底对以上4种有机物的检出限分别为10~(-6),10~(-7),10~(-8)及10~(-7)mol/L,相比于单一Au MLF基底,其检测限至少降低了1个数量级,这主要源自于PDMS对PAHs的富集作用,且此类复合基底可用于多种多环芳烃混合物的特征识别.     

Complexation of Hg2+ with α‐Lipoic and Dihydrolipoic Acids: Study by Differential Pulse Voltammetry on Rotating Au‐Disk Electrode and ESI‐MS

The complexation of the natural antioxidants α‐lipoic acid (ALA) and its reduced form dihydrolipoic acid (DHLA) with Hg²⁺ was investigated by a recently proposed differential pulse voltammetric (DPV) method using the rotating Au‐disk electrode. Complexation processes are proposed from the multivariate curve resolution by alternating least squares (MCR‐ALS) analysis of DPV titration data. Main complexes were both 1 : 1 Hg : ALA and Hg : DHLA, although the formation of 1 : 2 complexes can be also deduced. ALA and DHLA show different Hg²⁺‐binding patterns at different pH. Voltammetric findings are completed with the data obtained by electrospray ionization mass‐spectrometry (ESI‐MS), especially in negative mode.     

Fabrication of Bienzymatic Glucose Biosensor Based on Novel Gold Nanoparticles‐Bacteria Cellulose Nanofibers Nanocomposite

An exploration of gold nanoparticles–bacterial cellulose nanofibers (Au‐BC) nanocomposite as a platform for amperometric determination of glucose is presented. Two enzymes, glucose oxidase (GOx) and horseradish peroxidase (HRP) were immobilized in Au‐BC nanocomposite modified glassy carbon electrode at the same time. A sensitive and fast amperometric response to glucose was observed in the presence of electron mediator (HQ). Both of GOx and HRP kept their biocatalytic activities very well in Au‐BC nanocomposite. The detection limit for glucose in optimized conditions was as low as 2.3 µM with a linear range from 10 µM to 400 µM. The biosensor was successfully applied to the determination of glucose in human blood samples.     

Beyond labels: A review of the application of quantum dots as integrated components of assays, bioprobes, and biosensors utilizing optical transduction

A comprehensive review of the development of assays, bioprobes, and biosensors using quantum dots (QDs) as integrated components is presented. In contrast to a QD that is selectively introduced as a label, an integrated QD is one that is present in a system throughout a bioanalysis, and simultaneously has a role in transduction and as a scaffold for biorecognition. Through a diverse array of coatings and bioconjugation strategies, it is possible to use QDs as a scaffold for biorecognition events. The modulation of QD luminescence provides the opportunity for the transduction of these events via fluorescence resonance energy transfer (FRET), bioluminescence resonance energy transfer (BRET), charge transfer quenching, and electrochemiluminescence (ECL). An overview of the basic concepts and principles underlying the use of QDs with each of these transduction methods is provided, along with many examples of their application in biological sensing. The latter include: the detection of small molecules using enzyme-linked methods, or using aptamers as affinity probes; the detection of proteins via immunoassays or aptamers; nucleic acid hybridization assays; and assays for protease or nuclease activity. Strategies for multiplexed detection are highlighted among these examples. Although the majority of developments to date have been in vitro, QD-based methods for ex vivo biological sensing are emerging. Some special attention is given to the development of solid-phase assays, which offer certain advantages over their solution-phase counterparts.     

Au nanoparticles as a novel coating for solid-phase microextraction

A novel solid-phase microextraction fiber based on a stainless steel wire coated with Au nanoparticles was prepared and has been applied, coupled with gas chromatography, to the extraction of aromatic hydrophobic organic chemical pollutants in rainwater and soil extract. The solid-phase microextraction fiber exhibited excellent extraction efficiency and selectivity. Effects of extraction time, extraction temperature, ionic strength, stirring rate and desorption conditions were investigated and optimized. Single fiber repeatability and fiber-to-fiber reproducibility were less than 7.90% and 26.40%, respectively. The calibration curves were linear in a wide range for all analytes. Correlation coefficients ranged from 0.9941 to 0.9993. The as-established SPME-GC method was used successfully to two real natural samples. Recovery of analytes spiked at 10 μg L(-1) and 100 μg L(-1) ranged from 78.4% to 119.9% and the relative standard deviations were less than 11.3%.     

类铜Au50+离子电子碰撞激发特性的研究

利用全相对论扭曲波（RDW）方法,系统计算了类铜Au50+离子的外壳层电子4s激发到4l 、5l （ l= s、p、d、f,除去4s-4s ）和内壳层电子3l （l = s、p、d）激发到4l 、5l （l = s、p、d、f）的碰撞激发截面,研究了在不同入射电子能量下截面的变化规律,给出了3d-4f 和3d-5f 精细结构能级的碰撞激发截面。部分计算结果与其它理论及最新实验结果进行了比较,取得了很好的一致性。     

Surface-enhanced Raman scattering (SERS) activity of Ag, Au and Cu nanoclusters on TiO2-nanotubes/Ti substrate

Tubular arrays of TiO₂ nanotubes (ranging in diameter from 40 to 110 nm) on a Ti substrate were used as a support for Ag, Au or Cu deposits obtained by the sputter deposition technique, where the amount of metal varied from 0.01 to 0.2 mg/cm². Those composite supports were intended for surface-enhanced Raman scattering (SERS) investigations. Composite samples were studied with the aid of scanning electron microscopy (SEM) and Auger electron spectroscopy (AES) to reveal their characteristic morphological and chemical features. Raman spectra of pyridine (as a probe molecule) were measured at different cathodic potentials ranging from −0.2 down to −1.2 V after the pyridine had been adsorbed on the metal-covered TiO₂ nanotube/Ti substrates. In addition, SERS spectra on a bulk standard activated Ag, Au and Cu substrates were also measured. The SERS activity of the composite samples was strongly dependent on the amount of metal deposit, e.g. at and above 0.06 mg Ag/cm², the intensity of SERS signal was even higher than that for the Ag reference substrate. The high activity of these composites is mainly a result of their specific morphology. The high SERS sensitivity on the surface morphology of the substrate made it possible to monitor very small temporal changes in the Ag metal clusters. This rearrangement was not detectable with microscopic (SEM) or microanalytical (AES) methods. The SERS activity of Au or Cu clusters was distinctly lower than those of Ag. The spectral differences exhibited by the three kinds of composites as compared to the reference metal samples are discussed.     

钼蓝分光光度法测定纯金中的硅

建立了钼蓝分光光度法测定纯金中硅量的方法。确定了基体的分离方法、分离条件、还原剂及其用量;考察了酸度,试剂等对测定的影响。在优化条件下对3个合成试样进行了测定,RSD10%。方法的回收率在97%~122%之间,满足测定的要求。方法适用于0.001%~0.005%的硅量的测定。     

水热法合成ZnS∶Au,Cu超细X射线发光粉

报道了水热法合成的高强度ZnS∶Au,Cu超细X射线发光粉及其光致发光(PL)和X射线激发发光(XEL)的光谱特性。200℃水热处理12h直接合成样品的纳米晶粒约15nm,尺寸分布窄,分散性好,具有纯立方相的类球形结构。氩气保护下1000℃焙烧1h后的样品存在一定的团聚,但团聚后尺寸为1～2μm,为超细X射线发光粉,此时样品为纯六角相的类球形为主的结构。所有样品的PL和XEL光谱均为宽带谱,水热法直接合成样品的XEL强度最强时,样品的Cu/Zn,Au/Cu比值分别为3×10-5和2。在此比值条件下,1000℃焙烧1h样品的XEL发光最强,此时其2个峰值分别位于445和513nm,且与未焙烧前相比强度增强了10倍左右。另外通过比较PL光谱与XEL光谱特性,讨论了PL和XEL光谱的发光机理和其不同的激发机制。