纳米金标记抗体增强SPR检测大肠杆菌O157∶H7

将金纳米粒子(AuNPs)标记的大肠杆菌O157∶H7(E.coli O157∶H7)的多克隆抗体(PAb)作为二抗,采用氨基偶联法将PAb固定在传感器表面作为一抗,通过三明治方法用双通道表面等离子体子共振(SPR)传感器对E.coli O157∶H7进行检测,并与SPR直接法检测进行了比较.结果表明,直接法的检出限为103cfu/mL,线性范围为103～109cfu/mL;AuNPs增强三明治法的检出限为10 cfu/mL,线性范围为10～1010cfu/mL,灵敏度比直接法提高了100倍,且具有更宽的检测范围.本方法不仅检测时间短,而且具有良好的选择性和重现性.     

Pt/Au/Fe3O4的制备及其电化学性能

以制得的纳米Fe₃O₄颗粒作为载体,用还原法将还原出的Au与Pt分别负载到Fe₃O₄颗粒表面,制得纳米Pt/Au/Fe₃O₄复合材料。对Pt/Au/Fe₃O₄进行紫外可见光吸收光谱、透射电子显微镜、X射线衍射及光电子能谱等物理表征,结果表明,Au与Pt均匀地沉积到了Fe₃O₄纳米颗粒表面。对纳米Pt/Au/Fe₃O₄复合材料进行循环伏安扫描,当H₂PtCl₆的加入量达到8 mL时,Pt/Au/Fe₃O₄催化性能最佳;正扫电流峰i_p与扫描速率的平方根v^1/2线性相关,Pt/Au/Fe₃O₄催化氧化甲醇的过程受扩散控制;对催化剂进行201次循环伏安扫描,催化剂仍然能保持较好的催化性能且稳定性良好。因此,所合成催化剂Pt/Au/Fe₃O₄是一种具有良好化学稳定性的阳极催化剂材料。     

纳米材料修饰电极上吸附态葡萄糖氧化酶的酶活性和电活性的比较

采用石英晶体微天平(QCM)技术, 监测了裸金(Au)电极、电沉积纳米金的金电极(Au_ed/Au)、多壁碳纳米管(MWCNTs)修饰的金电极(MWCNTs/Au)以及MWCNTs 修饰后再电沉积纳米金的金电极(Au_ed/MWCNTs/Au)上葡萄糖氧化酶(GOx)的吸附过程, 测算了吸附固定的GOx质量. 通过阳极恒电位检测吸附酶与葡萄糖发生酶反应所产生的过氧化氢, 考察了这些酶电极的安培响应, 并测算了各吸附态GOx的质量比生物活性(MSBAi).也通过循环伏安法研究酶的直接电化学, 测算了各吸附态GOx的电活性百分数(EAP_i). 实验结果表明, 酶吸附量和酶电极的安培响应满足MWCNTs/Au > Au_ed/MWCNTs/Au > Au_ed/Au > Au 的顺序; MSBA_i满足Au > Au_ed/MWCNTs/Au > Au_ed/Au > MWCNTs/Au的顺序; 而EAP_i则满足MWCNTs/Au > Au_ed/MWCNTs/Au > Au_ed /Au > Au的顺序. 根据酶和纳米材料的亲疏水作用以及酶的吸附量对实验结果进行了合理解释, 也定量验证了电极上吸附酶分子的总生物活性与酶电极的安培响应呈正相关关系, 所得数据和结论有助于纳米材料固定酶及其安培酶电极的研究.     

密度泛函理论研究十二烷硫醇在Au(111)面上的吸附

采用第一性原理方法研究了十二烷硫醇(C₁₂H₂₅SH)分子在Au(111)面上未解离和解离吸附的结构、能量和吸附性质,在此基础上分析判断长链硫醇分子在Au(111)面吸附时S―H键的解离, 以及分子链长度对吸附结构和能量的影响. 计算了S原子在不同位置以不同方式吸附的系列构型, 结果表明在S―H键解离前和解离后,均存在两种可能的表面结构, 直立吸附构型和平铺吸附构型; 未解离的C₁₂H₂₅SH分子倾向于吸附在top位, 吸附能为0.35-0.38 eV; H原子解离后C₁₂H₂₅S基团倾向于吸附在bri-fcc位, 吸附能量为2.01-2.09 eV. 比较分析未解离吸附和解离吸附, 发现C₁₂H₂₅SH分子未解离吸附相较于解离吸附要稳定, 未解离吸附属于弱化学吸附.局域电子态密度和差分电荷密度分析进一步验证了S―H解离后S原子与表面之间成键的数目增加, 而且键合更强. 同时我们发现长链硫醇的吸附能量较短链硫醇的吸附能量略大, S原子与表面Au原子之间的距离略小.     

Pd/Au(100)表面上乙烯气相氧化法合成乙酸乙烯酯催化活性的密度泛函理论研究

采用密度泛函理论方法系统地研究了Pd/Au(100)表面上乙烯气相氧化法合成乙酸乙烯酯的催化活性.对关键反应物种在该表面的吸附、共吸附性质及耦合基元反应进行了计算和讨论.乙烯在Pd/Au(100)表面上存在π-,2σ-两种稳定吸附构型,为弱化学吸附;乙酸根物种存在Pd-Au与Pd-Pd两种二位啮合(bi-dentate)构型,为强化学吸附.Pd/Au(100)表面的吸附作用使两个关键反应物种分子轨道能量靠近.共吸附构型中最高占据和最低未占据分子轨道的能级差(HOMO-LUMO-gap)随表面相邻Pd原子数目的增多而增大,表明由HOMO向LUMO分子轨道发生电子转移的能力变弱.耦合基元反应过渡态能垒的分析结果与HOMO-LUMO-gap定性分析结果一致,说明连续相邻的表面Pd原子不利于反应的进行.     

三角形Au@TiO2介孔催化剂可见光降解亚甲蓝

利用溶胶凝胶法制备出一种三角形Au@TiO₂核壳材料。经过水热晶化,该材料膨胀至300 nm,壳层TiO₂晶化为介孔锐钛矿相,但核心三角形Au颗粒的形貌保持不变。采用粉末X射线衍射(PXRD)、ζ电位、高分辨透射电子显微镜(HRTEM)、热重分析(TGA)、光致发光(PL)光谱、光电流(i-t)以及光催化降解技术,对样品的结构和性能进行了系统、详细的检测与分析。经过晶化处理的Au@TiO₂在可见光波段的光降解亚甲蓝性能比未晶化时有了显著的提升, 1 mg·mL^-1 Au@c-TiO₂可以在可见光照射1 h后实现对60 mg·L^-1亚甲蓝全降解。电子顺磁共振(EPR)测试表明·O₂^-和·OH两种自由基对光降解起到了很大作用。通过综合分析实验结果和时域有限差分(FDTD)分析,探究了催化反应的机理。     

Spectrophotometric and physicochemical investigations of Congo,alizarin red dyes and BSA interactions with Au,Ag and Au/Ag mix nanoparticles,and their antimicrobial activities

Individual and mix metal nanoparticles of Ag and Au have been prepared by the reducing method where citrate was used as reducing/stabilizing agent. The prepared NPs were characterized with UV/Visible and transmission electron microscopic (TEM) tools. The characteristic peak in UV/Visible at 525, 444 and 531 nm for Au, Ag and Ag/Au mix NPs respectively, gave primary confirmation of prepared NPs. TEM analysis showed the size of nanoparticles as 44.04, 19.78 and 30.93 nm for Ag, Au and Ag/Au mix NPs respectively. Congo and alizarin red dye interactions studies have been performed with prepared NPs to see the removal of the pollutants from water. Congo dye has shown weaker interaction as compared to alizarin due to structural symmetry. Amongst all, the AgNPs have shown maximum 67% and 75% interactions with Congo red and alizarin respectively due to high negative charges on the surface. The Au, Ag and Au/Ag mix NPs have shown stronger interaction with bovine serum albumin (BSA) protein up to 51, 59, 55% respectively, estimated through UV/Vis and physicochemical analysis. The biological evaluations of the prepared NPs have shown their antibacterial activity against Gram + ve and –ve species showing up to 9 cm zone of inhibition. The BSA interaction and antibacterial activity of NPs reveal the importance of NPs in medicinal field.     

A Highly Sensitive and Selective Label-free Electrochemical Biosensor with a Wide Range of Applications for Bisphenol A Detection

A label-free DNA-based electrochemical biosensor owning high sensitivity and selectivity has been established for detecting bisphenol A in a wide range of applications. Coupling the high electrochemical performance of graphene oxide-thionine-Au nanomaterial with the specific binding capacity of the aptamers to BPA, the monitoring of trace amount of BPA was realized, the detection limit was 3.3 pg ⋅ mL⁻¹ with strong anti-interference. Besides, using molecular docking, it was found that BPA binds to the bases DC-49, DC-51, DG-52, DG-53 and DA-63 on the aptamer via hydrogen bonding and π-π stacking interactions. Finally, the biosensor had been successfully applied in different real samples.     

A Au nanoparticle and polydopamine co-modified biosensor: A strategy for in situ and label-free surface plasmon resonance immunoassays

This article reports a surface plasmon resonance (SPR) strategy capable of label-free yet amplified in situ immunoassays for sensitive and specific detection of human IgG (hIgG), a serum marker that is important for the diagnosis of certain diseases. Primarily, a wavelength-modulated Kretschman configuration SPR analyzer was constructed, and Au film SPR biosensor chips were fabricated. Specifically, based on Au nanoparticles (AuNPs) adsorbed on the surface of the Au film, the AuNP/Au film was coated with polydopamine (PDA) to fix streptavidin (SA), and then the biotinylated antibodies were connected to the surface of the biosensor chip. The SPR analyzer was utilized for in situ real-time monitoring of hIgG. Due to the immunological recognition between the receptor and target, the surface plasmon waves produced by the attenuated total reflection were affected by the changes in the surface of the biosensor chip. The resonance wavelength (λ_R) of the output spectra gradually redshifted, and the redshift degrees were directly related to the target concentration. The biosensor can realize the in situ detection of hIgG, displaying satisfactory sensitivity, excellent specificity and stability. Briefly, by monitoring the shift in λ_R after specific binding, a new SPR immunoassay can be customized for label-free, in situ and amplified hIgG detection. The operating principle of this research could be extended as a common protocol for many other targets of interest.