聚苯乙烯微球表面接枝丙烯腈的研究

采用分散聚合法制备出平均粒径为3.85 μm的窄分布聚苯乙烯微球， 并在此基础上引入第二单体丙烯腈进行共聚反应， 制备出平均粒径为4.02 μm的窄分布苯乙烯-丙烯腈共聚物微球. 对聚苯乙烯微球和苯乙烯-丙烯腈共聚物微球进行了形貌及粒径、红外光谱、差示扫描量热法(DSC)分析， 结果表明丙烯腈基团均匀分布在聚苯乙烯微球表面， 提高了聚苯乙烯微球表面的极性.     

表面分散过程的分形研究

盐类和氧化物等活性组分在一定条件下,可在高比表面载体上自发分散。研究这些过程对多相催化剂、吸附剂的制备过程理解和控制无疑是重要的。这类分散过程已被系统地研究,并提出了单层分散模型,对CuCl_2/γ-Al_2O_3、HgCl_2/活性炭等多种体系,测定了单层分散阈值。表面化学习惯上理解为就是二维的化学。早在1931年Tayor就指出表面是不均匀的,但这种不均匀性是作为对理想二维表面的修正而引入的,如TLK模型。表面科学的这些基本概念其数学基础是欧基里德几何学,其物理背景是晶体结构,不规则性就是指晶体结     

氧化物担载Ni（C5H5）2衍生催化剂的EXAFS表征

本文以二茂镍为母体化合物,以氧化铝和氧化硅为担体制备了担载镍催化剂。为了表征其结构特点,对这些催化剂热分解处理前后的样品在日本筑波高能物理研究所(Photon-Factory)的同步辐射加速器BL—10B EXAFS实验站进行了外延x-光精细结构谱测定(透射法)。以单散射球面波理论对实验结果进行了多参数拟合,同时对母体化合物也进行了平行测定和拟合,以验证数据及拟合方法的可靠性。研究结果表明,母体化合物的EXAFS结果与文献XRD相一致;母体化合物与担体表面发生了强烈的化学作用;镍组分在催化剂表面高度分散,氧化铝与Ni(C_5H_5)_2有更强的相互作用形成。Ni[(O)_s]_n(n≈4),近一半的镍原子周围有0.30 nm处的镍原子散射;氧化硅上除Ni[(CO)_s]_n(n≈3)外,在0.30 nm处有配位数为2的非成键Ni原子。     

PREPARATION AND CHARACTERIZATION OF POLYAMIDE 11/CLAY NANOCOMPOSITES

INTRODUCTIONIn recent years, polymer/clay nanocomposites have attracted great interest from researchers since they frequentlyexhibit unexpected hybrid properties synergistically derived from the two components. Compared to their microcounterparts and the pristine polymer matrix, polymer/clay nanocomposites exhibit improved tensile strength andmodulus, decreased thermal expansion coefficient, decreased gas permeability, increased swelling resistance,enhanced ion conductivity, and reduced fl…     

分散共聚法制备特殊形态高分子微球的研究

以聚乙二醇 (PEG)大分子单体为反应性稳定剂 ,在丙烯腈的分散共聚反应中添加少量苯乙烯以形成疏水性核 ,制备得到了亚微米级高分子微球 .透射电子显微镜研究表明 ,该高分子微球具有特异的形态结构 .同时研究了分散共聚体系中各种反应因素对微球形态和直径的影响 ,结果表明 ,苯乙烯单体的添加量、PEG大分子单体的浓度及分子量、混合溶剂的组成对微球直径和形态均有明显的影响 .X 射线光电子能谱 (XPS)研究结果表明 ,微球表面聚集有亲水性PEG链 ,核为疏水的聚 (丙烯腈 苯乙烯 ) ,即形成的特异形态的PEG接枝高分子微球亦为复合型结构     

van der Waals corrections to density functional theory calculations: Methane,ethane, ethylene,benzene, formaldehyde,ammonia, water,PBE, and CPMD

Parameters are developed for a practical application of the empirical van der Waals (vdW) correction infrastructure available in the CPMD density functional theory (DFT) code. The binding energy, geometry, and potential energy surface (PES) are examined for methane, ethane, ethylene, formaldehyde, ammonia, three benzene dimer geometries, and three benzene–water geometries. The vdW corrected results compare favorably with MP2 and CCSD(T) calculations near the complete basis set limits, and with experimental results where they are available.     

平行光栅对在刻线不平行时的色散研究

 利用三维空间光线追迹法，分析了啁啾脉冲放大系统中的压缩光栅对，在刻线不平行而光栅面平行时光的衍射特性。导出了此时光通过光栅对的群延时，数值计算了系统2阶和3阶色散量，以及这些色散量在光栅对严格平行时的相对误差。得出了中心波长光的接收位置相对于光栅对严格平行时的偏移量，并且分析了它与入射角的变化关系。     

Dispersion Stability of Fluorinated Multi-Walled Carbon Nanotubes in FC-27 Refrigerant

In order to achieve the dispersion stability of multi-walled carbon nanotubes (MWCNT) in a fluorinated refrigerant (FC-72) used in various cooling purposes, fluorinated MWCNT (MWCNT-F) was prepared by a combined process of oxidation and fluorination. As a fluorine source, (tridecafluoro-1,1,2,2-tetrahydrooctyl)trichlorosilane was used to react with hydroxyl groups on MWCNT (MWCNT-OH) generated by chemical oxidation. Pristine MWCNT, MWCNT-OH, and MWCNT-F were dispersed in FC-72 and MWCNT-F was also dispersed in polar and nonpolar solvents. The MWCNT-F has excellent colloidal stability in FC-72 because of the chemical affinity between FC-72 and functional groups (-CF_n) on the side walls of MWCNT. Through surface modifications, we could obtain the enhanced dispersion stability of MWCNT in a refrigerant. This homogenous MWCNT solution in FC-72 may be used to increase the heat transfer in FC-72 based nanofluids.     

Monodisperse Crosslinked Microsphere Polymer Particles by Dispersion Copolymerization of Glycidyl Methacrylate and Divinylbenzene

Monodisperse polyglycidyl methacrylate (PGMA) microsphere particles crosslinked with divinylbenzene crosslinker were prepared by single-stage dispersion copolymerization in ethanol medium. 1 wt% of DVB was successfully incorporated due to the costabilizing effect of GMA as a surface-active monomer. This behavior may indicate that the fast formation of stable primary particle leads to monodispersity. The average particle sizes and the particle size distributions increased with the DVB crosslinker concentration. The effects of two different variables (initiator concentration, crosslinker concentration) on the rate of dispersion copolymerization have been investigated. With the initiator concentration, the polymerization procedure mainly depended on the dual natures of general dispersion polymerization, in the crosslinked state. Up to 1 wt% DVB, the particle growth was controlled by the monomer diffusion from the continuous phase into the particle phase.     

On the role of nonlinearities in the Boussinesq-type wave equations

Longitudinal mechanical waves in biomembranes are described by a Boussinesq-type wave equation. It is shown that in this case the nonlinearities are of a different type compared with conventional models of solids. The governing equation analysed in this paper is the improved Heimburg–Jackson model with two dispersive terms. The soliton-type solutions of such a wave equation are found and analysed. The existence of solitons depends on the ratio of nonlinear terms and the width of solitons is governed by dispersive terms.