Miniaturized molecularly imprinted polymer extraction method for the gas chromatographic analysis of flavonoids

In this study, the use of monolithic molecularly imprinted polymers in a micropipette tip format allowing the simple and fast extraction of flavonoids from standard solutions and a black tea sample is demonstrated. The imprinted polymer employed quercetin, methacrylic acid or 4‐vinylpyridine, and ethylene glycol dimethacrylate as template, functional monomer, and cross‐linker, respectively. Surface morphologies of the quercetin‐imprinted polymers and the corresponding nonimprinted polymers were characterized by SEM. Extraction of flavonoid standards was performed to evaluate the selectivity and recovery with these imprinted and nonimprinted polymers. Flavonoid compositions in aliquots eluted from the tips were identified using fast GC with flame ionization detection. Maximum specific capacities of 0.2, 5.7, and 16.0 mg/g for catechin, morin, and quercetin, respectively, were obtained with the imprinted polymer prepared with methacrylic acid, with the corresponding recoveries of 99.8, 98.8, and 95.4%, respectively. Efficient extraction by the quercetin‐imprinted polymer of epicatechin, catechin, and quercetin from an apple‐flavored black tea sample was achieved, with GC–MS employed for compound identification for both the tea and extracted samples.     

高中化学“电负性”的项目式教学*——甲醛的危害与去除

电负性是高中化学选择性必修课程“物质结构与性质”模块的重要概念。本课例采用“项目式教学”的方式,在对“甲醛的危害与去除”的分析、讨论与实验过程中,加深对电负性概念的理解,同时尝试利用电负性分析与预测物质的化学性质,体会电负性概念的使用价值。     

热力学数据对1, 3-丁二烯燃烧特性的影响

基于G4方法, 计算了1,^{3-丁二烯框架燃烧反应机理中102个物种的热力学数据, 并考察了振动非谐性、 频率校正因子以及受阻内转动对结果的影响. 结果表明, 考虑振动非谐性或采用不同的频率校正因子, 对热力学数据的影响不大; 考虑内转动后, 对热力学数据有较大影响. 而且考虑内转动后, 得到的热力学数据与实验热力学数据吻合得更好. 用所得热力学数据模拟了1,3-丁二烯的绝热燃烧温度以及点火延迟时间, 结果显示, 要得到可靠的绝热火焰温度, 对小分子(如CO和CO₂等)的热力学数据需要采用实验结果. 将用所得热力学数据模拟得到的点火延迟时间, 与机理本身的热力学数据所得点火延迟时间进行对比, 二者差别显著, 表明所得热力学数据主要通过改变一些反应的逆反应速率常数来影响点火延迟时间. 进一步确定了用所得热力学数据对点火延迟时间有显著影响的一些物种.}     

Optimization of Vacuum-Microwave-Assisted Extraction of Natural Polyphenols and Flavonoids from Raw Solid Waste of the Orange Juice Producing Industry at Industrial Scale

Orange pomace (OP) is a solid waste produced in bulk as a byproduct of the orange juice industry and accounts for approximately 50% of the quantity of the fruits processed into juice. In numerous literature references there is information about diverse uses of orange pomace for the production of high-added-value products including production of natural antioxidant and antimicrobial extracts rich in polyphenols and flavonoids which can substitute the hazardous chemical antioxidants/antimicrobials used in agro-food and cosmetics sectors. In this work and for the first time, according to our knowledge, the eco-friendly aqueous vacuum microwave assisted extraction of orange pomace was investigated and optimized at real industrial scale in order to produce aqueous antioxidant/antimicrobial extracts. A Response Surface Optimization methodology with a multipoint historical data experimental design was employed to obtain the optimal values of the process parameters in order to achieve the maximum rates of extraction of OP total polyphenols and/or total flavonoids for economically optimum production at industrial scale. The three factors used for the optimization were: (a) microwave power (b) water to raw pomace ratio and (c) extraction time. Moreover, the effectiveness and statistical soundness of the derived cubic polynomial predictive models were verified by ANOVA.     

过渡态理论在化学体系中的2个应用实例*

在大学本科一二年级的物理化学教学中,化学动力学章节的学习涉及到对不同时间尺度的认识。本文利用过渡态理论得到的速率常数表达公式,以乙烷分子碳/碳单键旋转和水分子氢键交换的动力学过程为例,对这2个应用实例的动力学过程所发生的时间尺度做出估算。这些时间尺度的估算对于学生理解不同动力学过程的物理图像至关重要,同时也有助于加强学生对重要公式的理解并能够将这些公式在化学体系中灵活运用。     

An evaluation method based on absolute difference to validate the performance of SBNUC algorithms

Scene-based non-uniformity correction (SBNUC) algorithms are an important part of infrared image processing; however, SBNUC algorithms usually cause two defects: (1) ghosting artifacts and (2) over-correction. In this paper, we use the absolute difference based on guided image filter (AD-GF) method to validate the performance of SBNUC algorithms. We obtain a self-separation source using the improved guided image filter to process the input image, and use the self-separation source to obtain the space-high-frequency parts of the input image and the corrected image. Finally, we use the absolute difference between the two space-high-frequency parts as the evaluation result. Based on experimental results, the AD-GF method has better robustness and can validate the performance of SBNUC algorithms even if ghosting artifacts or over-correction occur. Also the AD-GF method can measure how SBNUC algorithms perform in the time domain, it’s an effective evaluation method for SBNUC algorithm.     

无溶剂法大量制备高效红光碳点及其在白光器件中的应用

以邻苯二胺、 2,5-二氨基苯磺酸和三氯化铝为原料, 通过无溶剂法大量制备了高效的红色荧光碳点 (R-CDs). 制得的碳点尺寸大约为2.4 nm, 含有13%的氮元素, 主要由高度石墨化的碳核及覆盖在其表面的大量官能团构成. 在不同的波长光激发下, 碳点在乙醇溶液中表现出不依赖于激发的红光发射, 其荧光峰位于 704 nm, 最大量子产率达到22%. 由于R-CDs具有优异的光学性质, 利用其构筑了紫外光激发的碳基白色发光二极管, 其色坐标为(0.33, 0.33), 非常接近自然光. 该研究为高效红色荧光碳点的大量制备提供了一种新路径, 同时拓宽了其在白光器件中的应用.     

多种超分辨荧光成像技术比较和进展评述

所见即所得是生命科学研究的中心哲学,贯穿在不断认识单个分子、分子复合体、分子动态行为和整个分子网络的历程中。活的动态的分子才是有功能的,这决定了荧光显微成像在生命科学研究中成为不可替代的工具。但是当荧光成像聚焦到分子水平的时候,所见并不能给出想要得到的。这个障碍是由于受光学衍射极限的限制,荧光显微镜无法在衍射受限的空间内分辨出目标物。超分辨荧光成像技术突破衍射极限的限制,在纳米尺度至单分子水平可视化生物分子,以前所未有的时空分辨率研究活细胞结构和动态过程,已成为生命科学研究的有力工具,并逐渐应用到材料科学、催化反应过程和光刻等领域。超分辨成像技术原理不同,其具有的技术性能各异,限制了各自特定的技术特色和应用范围。目前主流的超分辨成像技术包括3种:结构光照明显微镜技术(structured illumination microscopy, SIM)、受激发射损耗显微技术(stimulated emission depletion, STED)和单分子定位成像技术(single molecule localization microscopy, SMLM)。这些显微镜采用不同的复杂技术,但是策略却是相同和简单的,即通过牺牲时间分辨率来提升衍射受限的空间内相邻两个发光点的空间分辨。该文通过对这3种技术的原理比较和在生物研究中的应用进展介绍,明确了不同超分辨成像技术的技术优势和适用的应用方向,以方便研究者在未来研究中做合理的选择。     

Large scale synthesis of red emissive carbon dots powder by solid state reaction for fingerprint identification

Red emissive carbon dots(CDs) powder was synthesized on a large scale from phloroglucinol and boric acid by a novel solid state reaction with yield up to 75%. This method is safe and convenient, for it needs neither high pressure reactors nor complicated post-treatment procedures. The as-prepared carbon dots powder exhibited strong red fluorescence with excitation-independent behavior. XPS measurement and PL spectra suggest that such red fluorescence arise from boron-doped structures in CDs, which increases along with the boron concentration on CDs surface but decreases when the concentration quenching effect takes place. To overcome the aggregation induced fluorescence quenching of the solid CDs powder,the conventional methods are dispersing CDs into a large amount of inert substrates. But our present work provides a new strategy to realize strong red fluorescence of CDs in solid state. As a result, such carbon dots powder works well for latent fingerprint identification on various material surfaces.     

Batch versus Flow Photochemistry: A Revealing Comparison of Yield and Productivity

The use of flow photochemistry and its apparent superiority over batch has been reported by a number of groups in recent years. To rigorously determine whether flow does indeed have an advantage over batch, a broad range of synthetic photochemical transformations were optimized in both reactor modes and their yields and productivities compared. Surprisingly, yields were essentially identical in all comparative cases. Even more revealing was the observation that the productivity of flow reactors varied very little to that of their batch counterparts when the key reaction parameters were matched. Those with a single layer of fluorinated ethylene propylene (FEP) had an average productivity 20 % lower than that of batch, whereas three‐layer reactors were 20 % more productive. Finally, the utility of flow chemistry was demonstrated in the scale‐up of the ring‐opening reaction of a potentially explosive [1.1.1] propellane with butane‐2,3‐dione.