Chalcogenide based all-solid-state thin electroplated ion-selective membrane for Hg(II) flow-injection determinations

The response to Hg(II) of a thin all-solid-state Te-doped silver chalcogenide membrane, described by the general formula Ag₂ + δSe_{1 − x}Te_x, which has been electrochemically prepared following a previously proposed approach, has been investigated. The kinetics of formation of the membrane's secondary dynamic response to Hg(II) has been successfully combined with the precise timing and transient signal, typical for flow-injection (FI) measurements, in developing a sensitive and reliable mercury FI detector. Under optimized stream conditions it exhibits a linear Nernstian response, with a double slope of the calibration graph of 59 mV dec⁻¹, over the mercury(II) concentration range 10⁻⁶ − 10⁻³ M, the typical sample throughput amounting to about 70 samples per hour. The observed chemical amplification of the signal is due to the specificity of the processes dominating the initial step in formation of the steady-state signal of the membrane to mercury. The analytical performance of the Hg(II) FI detector, as regards sensitivity, reproducibility, selectivity and long-term stability has been thoroughly investigated. The exact procedure for membrane electrodeposition is given and the potential of the proposed approach as a cost-effective way for preparing chalcogenides of unique structure and properties has been outlined in the above context.     

Reaction of D2 with palladium fulleride C60Pd4.9

Fullerene deuteride was obtained by the reaction of deuterium with solid palladium fulleride C₆₀Pd_4.9 under fairly mild conditions. The compound was identified by FD-MS, UV-Vis and IR spectroscopies, and TLC.Translated from Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 483–484, February, 1996     

Kinetic Studies of Electrochemical Oxidation of 1,3-Benzenedithiol

The electrochemical oxidation of 1, 3-benzenedithiol was investigated in a 0. 100 mol/L tetrabutylammonium perchlorate/acetonitrile electrolyte. The electrochemical techniques used were potential sweep, bulk electrolysis, rotating disc and the potential step method. The combination of the techniques yielded the number of electrons transferred per molecule, the reaction order, the transfer coefficient, the diffusion coefficient and concentration of dithiol anions, the standard heterogeneous rate constant as well as the formal potential and equilibrium constant of the preceeding dissociation reaction. This paper also illustrates the methods for studying the electrode kinetics of reactions which (a) involve a chemical reaction preceeding the electron-transfer process, (b) have insoluble polymer products, and (c) are totally irreversible.     

Theoretical Design of High-spin Organic Molecules with —^＊N—S— as a Spin-containing Fragment and Heterocycle as End Groups

IntroductionDesigns and syntheses of organic molecules withvery high-spin ground states have been a topic of greatinterest[1—8].One of the rational approaches to desig-ning high-spin molecules,which has been proposedand studied by several groups[9,10],in…     

Shape transition from InAs quantum dash to quantum dot on InP(3 1 1)A

We report on the shape transition from InAs quantum dashes to quantum dots (QDs) on lattice-matched GaInAsP on InP(3 1 1)A substrates. InAs quantum dashes develop during chemical-beam epitaxy of 3.2 monolayers InAs, which transform into round InAs QDs by introducing a growth interruption without arsenic flux after InAs deposition. The shape transition is solely attributed to surface properties, i.e., increase of the surface energy and symmetry under arsenic deficient conditions. The round QD shape is maintained during subsequent GaInAsP overgrowth because the reversed shape transition from dot to dash is kinetically hindered by the decreased ad-atom diffusion under arsenic flux.     

Poly(L‐lysine) and clay nanocomposite with desired matrix secondary structure: Effects of polypeptide molecular weight

Nanocomposites (NC) were formed using cationic poly(L ‐lysine) (PLL), a semicrystalline polypeptide, that was reinforced by sodium montmorillonite (MMT) clay via solution intercalation technique. By varying solution conditions such as pH, temperature, and polypeptide concentration in the presence of clay platelets, the secondary structure of PLL was controllably altered into α‐helical, β‐sheet, and random coil. The high molecular weight polypeptide shows a strong propensity to fold into the β‐sheet structure when cast as films, irrespective of the initial secondary structure in solution. Nanocomposite local morphology confirms intercalated MMT platelets with PLL over a wide range of compositions. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 239–252, 2007.     

Influence of organic modifiers on morphology and crystallization of poly(ϵ‐caprolactone)/synthetic clay intercalated nanocomposites

ε‐caprolactone was polymerized in the presence of neat montmorillonite or organomontmorillonites to obtain a variety of poly(ε‐caprolactone) (PCL)‐based systems loaded with 10 wt % of the silicates. The materials were thoroughly investigated by different X‐ray scattering techniques to determine factors affecting structure of the systems. For one of the nanocomposites it was found that varying the temperature in the range corresponding to crystallization of PCL causes reversible changes in the interlayer distance of the organoclay. Extensive experimental and literature studies on this phenomenon provided clues indicating that this effect might be a result of two‐dimensional ordering of PCL chains inside the galleries of the silicate. Small angle X‐ray scattering and wide angle X‐ray scattering investigation of filaments oriented above melting point of PCL revealed that polymer lamellae were oriented perpendicularly to particles of unmodified silicate, while in PCL/organoclay systems they were found parallel to clay tactoids. Calorimetric and microscopic studies shown that clay particles are effective nucleating agents. In the nanocomposites, PCL crystallized 20‐fold faster than in the neat polymer. The crystallization rate in nanocomposites was also significantly higher than in microcomposite. Further research provided an insight how the presence of the filler affects crystalline fraction and spherulitic structure of the polymer matrix in the investigated systems. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2350–2367, 2007     

Derivatization of 1-phenyl substituted 4-amino-2-benzazepin-3-ones: evaluation of Pd-catalyzed coupling reactions

Several Pd-catalyzed reactions were explored to further functionalize the bromo-substituted 4-amino-1,2,4,5-tetrahydro-2-benzazepin-3-one scaffold (Aba). We report in this paper suitable reaction conditions for Suzuki, Buchwald-Hartwig, and Heck reactions. The substitution pattern of the starting aminobenzazepinone turned out to be crucial for the success of these transition metal-catalyzed reactions, which often required modifications of standard literature procedures. The Pd-catalyzed methods provide access to novel substitution patterns of the Aba scaffold.     

Structure of norbornene-fused 3,1-oxazine double cycloadducts

Pentacyclic isoxazolines were obtained by the cycloaddition of benzonitrile oxide to norbornene-azetidinone-fused 3,1-oxazines. The constitutions of two of the isomers obtained, and the configurations and conformations of all products, were determined by means of ¹H and ¹³C NMR spectroscopy and DNOE experiments.     

无K1,r图中的哈密顿圈（英文）

本文借助对图的本质独立集和图的部分平方图的独立集的研究，对于K1,r图中哈密顿圈的存在性给出了八个充分条件。我们将利用T－插点技术对这八个充分条件给出统一的证明，本文的结果从本质上改进了C－Q.Zhang于1988年利用次形条件给出的k-连通无爪图是哈密顿图的次型充分条件，同时。G.Chen和R.H.Schelp在1995年利用次型条件给出的关于k-连通无K1，4图是哈密顿图的充分条件也被我们的结果改进并推广到无K1,r图。