Self-assembly of Carboxyl Functionalized Polystyrene Nanospheres into Close-packed Monolayers via Chemical Adsorption

The polyacrylic acid functionalized polystyrene nanospheres were synthesized and self-assembled into irregular, densely packed monolayers in non-aqueous media. The polymer nanoparticles were chemically adhered to substrates. The morphologies of the resulting films were investigated. The impact of the volume fraction of alcohol in the mixed solvents on the particle adsorption and fabrication of nanosphere assembled films was examined.     

Studies on the Adsorption of Asymmetrical Triblock Copolymers by Scheutjens-Fleer Theory and Monte Carlo Simulation

The adsorption of asymmetrical triblock copolymers from a non-selective solvent on solid surface has been studied by using Scheutjens-Fleer mean-field theory and Monte Carlo simulation method on lattice model. The main aim of this paper is to provide detailed computer simulation data, taking A8-kB20Ak as a key example, to study the influence of the structure of copolymer on adsorption behavior and make a comparison between MC and SF results. The simulated results show that the size distribution of various configurations and density-profile are dependent on molecular structure and adsorption energy. The molecular structure will lead to diversity of adsorption behavior. This discrepancy between different structures would be enlarged for the surface coverage and adsorption amount with increasing of the adsorption energy. The surface coverage and the adsorption amount as well as the bound fraction will become larger as symmetry of the molecular structure becomes gradually worse. The adsorption layer becomes thicker with increasing of symmetry of the molecule when adsorption energy is smaller but it becomes thinner when adsorption energy is higher. It is shown that SF theory can reproduce the adsorption behavior of asymmetrical triblock copolymers. However, systematic discrepancy between the theory and simulation still exists.The approximations inherited in the mean-filed theory such as random mixing and the allowance of direct back folding may be responsible for those deviations.     

氧化钴—氧化锰／吸附树脂对甲酚的催化氧化性能的研究与结构表征

本文通过制备吸附树脂Ｄ３５２０负载的钴，锰双金属氧化物催化剂（Ｃｏ－Ｍｎ－Ｏ／Ｄ３５２０），考察了在强碱性醇溶液中氧化对甲酚制对羟基苯甲醛的催化性能。利用ＸＲＤ，ＸＰＳ，ＩＲ等方法研究了催化剂的表面结构及其与催化性能的关系。     

HL-1M边缘等离子体静电湍流扰动

对HL－1M边缘等离子体静电湍流扰动进行了初步的实验研究。获得了扰动的基本特征量，估计了低杂波引起的径向粒子流的变化。在加低杂波（2．45GHz)前、后，电子密度扰动和极向电场扰动的幅度及其关联性变化不大。虽然低杂波部分抑制了静电湍流，但在数量上不能解释粒子约束改善的实验结果。     

分子和金表面相互作用的第一性原理研究

从第一性原理出发利用密度泛函理论研究了 4 ,4′ 二巯基联苯分子和金表面的相互作用 ,并利用了前线轨道理论和微扰理论定量地确定了该相互作用能常数. By using density functional theory, we have investigated the interaction between a thiol-phenyl molecule (4-4′-dimercaptodibenzene) and a gold surface. The frontier orbit theory and the perturbation theory are also employed to determine quantitatively the constant of interaction energy. The results show that the bonding between the sulfur atom and the gold atoms corresponds mainly to the covalent bond and some molecular orbits are extended over the molecule and gold cluster which certainly give channels...     

静电火花法表征塑料导爆管起爆感度探索

提出了塑料导爆管轴向静电火花感度的概念、测试原理。用标准的静电感度测试仪配以一定结构的起爆针 ,建立了可用于导爆管感度测试的实验装置 ,采用升降法测出导爆管起爆所需静电能量并用它来表征导爆管的感度。用三种导爆管进行了感度测试 ,实验条件下其感度值E0 .50 分别为 0 .4 3、1.0 8、1.94J。     

静电减速透镜能量分析器的数值计算

用表面电荷密度法计算了能量分析器中静电减速透镜的电位分布,有基尔法对电子轨迹进行了模拟,在电子能量为20keV时,得到分析器的能量分辨为1.0eV;讨论了束径、入射角、透镜第三电极孔径对能量分辨的影响;并对个别实验结果论作了补充.     

镍-酸性铬兰K络合物吸附波

用微分脉冲溶出伏安法研究了镍(11)与酸性铬兰K(ACBK)所生成的络合物在悬汞电极上的电化学特性及电化学反应机理，发现电极反应为镍与酸性铬兰K所生成的络合物吸附在电极表面后发生的不可逆还原。在HCl-硼砂介质中(pH8．67)，络合物在-316mV处有一吸附还原峰，其峰电流与镍浓度在0．001～0．010μ/mL范围内呈现良好的线性关系，其最低检出浓度为0．0005μg／mL。     

复合薄膜透湿率对分子筛吸附性能的影响

分子筛经活化后用复合薄膜包装袋封装存放一定时间后使用，由于水汽缓慢渗透和包装袋微量泄漏的存在，可能使分子筛吸湿，从而直接影响其使用效果和有效期，因此试验研究分子筛产品包装贮存前后吸附性能的变化，以验证理论计算结果，并为分子筛应用提供重要的试验依据。     

氘氚化锂分解残渣中微量氚的回收

氘作同位素交换气对除氚后的新鲜氘氚化锂残渣[主要成分是硅锂化合物和二氧化硅，渣中含氚约为0．9443mg／g(渣)]中的微量氚进行氚的计量与回收，为氘氚化锂残渣中氚的回收提供技术支持。