PLD法生长n-Zn1-xCoxO/p-Si异质结的电学性能研究

用高功率脉冲激光轰击Zn1-xCoxO,得到锌、钴和氧的原子、分子和团簇等混合体,并在p型单晶Si表面反应生成n型Zn1-xCoxO.X射线衍射(XRD)、原子力显微镜(AFM)研究表明,这层材料是结构致密均匀、呈c轴高度择优取向的薄膜,与p型Si材料形成n-Zn1-xCoxO/p-Si异质结.在Zn1-xCoxO中加入H,生成了Co-H-Co聚合体,异质结的势垒高度随着Co含量的增加而增加,同时深能级的Co-d轨道捕获作为浅施主的间隙H提供的电子,造成的体系n型半导体层的载流子浓度降低,电阻率提高,使得n-Zn1-xCoxO/p-Si异质结在6.5V时漏电流降致6×10-3 mA,反向击穿电压超过20V,电学性能得到显著改进.     

金属卟啉催化条件下有机化合物与CO2的电羧化反应（Ⅴ）

研究了碘化四－（４－三甲胺基苯基）卟啉钴和ＶＢ１２催化ＣＯ２与卤代丁烷的电合成，该反庆在－１．５Ｖ（ｕｓ，ＳＣＥ）即可发生，ＶＢ１２催化产物为预期的戊酸丁酯，而ＣｏＴＰＰ催化产物为ＣＯ２直接还原的草酸二丁酯，并未发现ＣＯ２与卤代烷的反应产物，初步探讨了产生不同产物的原因。     

Low-Temperature Growth of Polycrystalline silicon Films by SiCl4／H2 rf Plasma Enhanced Chemical Vapour Deposition

Polycrystalline silicon film was directly fabricated at 200℃ by the conventional plasma enhanced chemical vapour deposition method from SiCl4 with H2 dilution. The crystallization depends strongly on the deposition power.The maximum crystMlinity and the crystalline grain size are over 80% and 200—50Onm, respectively. The results of energy dispersive spectroscopy and infrared spectroscopy measurements demonstrate that the film is mostly composed of silicon, without impurities such as Cl, N, C and bonded H. It is suggested that the crystallization at such a low temperature originates from the effects of chlorine, i.e., in-situ chemical, etching, in-situ chemical cleaning, and the detachment of bonded H.     

丹聂耳电池电动势产生的机理

 1836年,英国化学家丹聂耳(Daniell)发明了一种原理上最简单的化学电池,通常称之为丹聂耳电池。电动势是化学电池的一个重要的性能参数。而电动势等于单位正电荷由负极通过电池内部移到正极时电池内非静电力(化学力)所做的功。它取决于电极材料的化学性质,与电池的大小无关。因此,本文就从物理化学角度来探讨丹聂耳电池电动势产生的机理。丹聂耳电池的结构如图1所示。电池的两个电极锌板和铜板分别浸在ZnSO₄溶液和CuSO₄溶液中。     

相对论粒子在地球偶极磁场中辐射谱的数值计算

从运动的荷电粒子产生的流密度出发,研究了在地球偶极磁场中运动的相对论性荷电粒子的辐射能量谱,并对其进行数值计算.分析了相对论性荷电粒子在地球偶极磁场这种特殊磁场中的辐射特点.     

A Novel Analytical Approach for Multi-Layer Diaphragm-Based Optical Microelectromechanical-System Pressure Sensors

An optical microelectromechanical-system （MEMS） pressure sensor based on multi-layer circular diaphragm is described and analysed by using the proposed novel analytical approach and the traditional transfer matrix method. The analytical expressions of the deflection of multi-layer diaphragm and absolute optical reflectance are derived respectively. The influence of residual stress on the deflection of diaphragm is also analysed. Simulation results given by the finite element method are consistent with the ones which are analysed by using the analytical approach. The analytical approach will be helpful to design and fabricate the optical MEMS pressure sensors with multi-layer diaphragm based on Fabry-Perot interferometry.     

Effect of Incident Intensity on Films Growth in Pulsed Laser Deposition

Incident intensity, defined by the amount of particles deposited per pulse, is an important parameter in the film growth process of pulsed laser deposition （PLD）. Different from previous models, we investigate the irreversible and reversible growth processes by using a kinetic Monte Carlo method and find that island density and film morphology strongly depend on pulse intensity. At higher pulse intensities, lots of adatoms instantaneously diffuse on the substrate surface, and then nucleation easily occurs between the moving adatoms resulting in more smaller-size islands. In contrast, at the lower pulse intensities, nucleation event occurs preferentially between the single adatom and existing islands rather than forming new islands, and therefore the average island size becomes larger in this case. Additionally, our results show that substrate temperature plays an important role in film growth. In particular, it can determine the films shape and weaken the effect of pulse intensity on film growth at the lower temperatures by controlling the mobility rate of atoms. Our results can match the related theoretical and experimental results.     

Rh ⅩⅢ,Pd ⅪⅤ和AgⅩⅤ离子4s~24p~3—4s~24p~25s跃迁的扩展分析

用相对论HartreeFock方法对YⅦ—AgⅩⅤ离子4s24p3和4s24p25s组态的能级结构进行了系统的理论计算.通过分析能级结构的Slater径向积分参数沿等电子序列的变化规律,运用参数拟合外推(或内插)的方法计算了上述离子组态的能级结构参数.在此基础上,计算了Rh,Pd和AgⅩⅤ离子4s24p3(4S32,2P12,32,2D12,32)和4s24p25s(4P12,32,52,2P12,32,2D32,52,2S12)组态的精细结构能级以及这两个组态之间电偶极允许跃迁的全部35条谱线波长与相应的振子强度,其中Pd和AgⅩⅤ离子的所有数据纯属目前的预测计算值.     

EACVD中用氢原子谱线测定电子平均能量

采用蒙特卡罗方法，对EACVD中氢原子的发射过程进行了模拟。给出了由氢原子谱线测定电子平均能量的方法，结果对EACVD生长金刚石薄膜过程中实时监测电子平均能量，进而可以有效地控制工艺条件，生长出高质量的金刚石薄膜具有重要意义。     

基于LiCo0.8M0.2O2 (M=Ni,Zr)薄膜的全固态薄膜锂电池

用射频磁控溅射结合传统退火的方法制备LiCo0.8M0.2O2 (M=Ni,Zr)阴极薄膜．X射线衍射、拉曼光谱、扫描电子显微镜等手段表征了不同掺杂的LiCo0.8M0.2O2薄膜．结果显示,700℃退火的LiCo0.8M0．2O2薄膜具有类似α-NaFeO2的层状结构．通过对不同掺杂锂钴氧阴极的全固态薄膜锂电池Li／LiPON／LiCo0.8M0.2O2的电化学性能研究表明,电化学活性元素Ni的掺杂使全固态电池具有更大的放电容量(56μAh／cm2μm),而非电化学活性元素Zr的掺杂使全固态电池具有更好的循环稳定性．