PEO／PVP共混体系结晶行为

本文用WAXD、PLM、DSC方法研究了聚氧化乙烯(PEO)/聚乙烯基吡咯烷酮(PVP)共混体系的结晶行为,探索了两组分聚合物间相互作用及体系结晶度与非晶组分含量的关系。DSC研究表明PEO/PVP共混体系具有两个玻璃化转变温度,分别是纯组分的T_g,无相容性。应用Avrami和LH方程对其动力学参数进行了研究。偏光显微镜观察了共混物结构形态。     

结晶聚合物品相相容性的研究

通过ＤＳＣ、Ｘ－射线衍射、红外光谱及拉伸试验研究了ＨＤＰＥ与ＬＬＤＰＥ、ＨＤＰＥ与ＬＤＰＥ之间的晶相相容性．结果表明，链结构相近的ＨＤＰＥ和ＬＬＤＰＥ的晶相相容性好，能形成共晶；而链结构差异较大的ＨＤＰＥ和ＬＤＰＥ的晶相相容性较差，倾向于分别结晶，但有部分链段被对方的晶区夹持．不论是支化度大的ＬＤＰＥ链段插入以ＨＤＰＥ为主的晶区，还是支化度小的ＨＤＰＥ链段插入以ＬＤＰＥ为主的晶区，都可破坏晶区的规整性．共晶的形成使共混物的熔点、结晶度、晶粒体积等低于两组份的线性加和，而力学性能，尤其是断裂伸长率，则显著提高，呈协同效应．     

用WAXD和SAXS研究辐照聚酰胺1010结构

用ＷＡＸＤ和ＳＡＸＳ方法研究了聚酰胺１０１０的聚集态结构和结晶结构的辐射损伤过程和机理。辐射交联与裂解主要在非晶区和结晶表面或中间相发生；辐射损伤并从这里开始，随辐射剂量增大，非晶化逐渐向晶区伸展，有氢键的（０１０）晶面损伤几率高于（１００）晶面；辐射后效应导致新的交联与裂解生成，主要影响（０１０）晶面的形成与完善，使Ｌ１００及Ｗｃ变小。     

B-Al-ZSM-5沸石的固相结晶过程和机理的研究

用11B ,2 7Al,2 9Si,13 CMASNMR ,XRD ,IR技术详细研究了B2 O3 ·Al2 O3 ·SiO2 干凝胶在乙胺 /H2 O混合蒸气相中 ,固相转晶生成B Al ZSM 5沸石的过程和机理 .干胶中非网络的三配位硼氧基团在转晶过程中起着非常重要的作用 .结晶过程中Al原子周围的化学环境变化很复杂 ,干胶及最终沸石产物中都不存在的六配位铝只在半晶化产物中出现 .硅主要以羟基化合物形式存在于干胶中 ,反应过程中出现的非结构硅氧基团在完全晶化时消失 .既是反应物又是模板剂的乙胺分子通过氢键与干胶表面的硼羟基、铝羟基和硅羟基结合形成前驱体 ,促进了结晶过程 .经11BMASNMR和IR谱的测定 ,固相转晶生成的B Al ZSM 5沸石相对结晶度为 93%左右 .     

Li2O·nB2O3-20%LiCl-H2O体系20℃过饱和溶液结晶动力学研究

用动力学方法对Li₂O·nB₂O₃-20%LiCl-H₂O体系(n=1,2,3)20℃过饱和溶液结晶过程进行研究，结果表明每一种溶液只析出一种固相，Li₂O∶B₂O₃=1∶1、1∶2和1∶3的氯化锂溶液分别结晶出Li₂O·B₂O₃·4H₂O, Li₂O·2B₂O₃·3H₂O和Li₂O·5B₂O₃·10H₂O，拟合并给出结晶动力学方程，同时对这三种固相的结晶反应机理进行了探讨。     

尼龙1010结构与性能研究进展（下）：结晶,熔融,性质,改性

本文介绍了尼龙１０１０的结晶过程与动力学、晶体的熔融与转化；并论述了其稀溶液、热降解与动态力学性质及共聚、共混、填充、增强、交联改性方面的研究进展。     

CRYSTALLIZATION AND MELTING OF POLY（ETHYLENE OXIDE） CONFINED IN NANOSTRUCTURED PARTICLES WITH CROSS-LINKED SHELLS OF POLYBUTADIENE

Small fixed aggregates of a poly(ethylene oxide)-block-polybutadiene diblock copolymer(PEO-b-PB)in THFsolution were obtained by adding a selective solvent for PB blocks,followed by cross-linking the PB shells.Themorphologies of the nanostructured particles with a cross-linked shell were investigated by atomic force microscopy andtransmission electron microscopy.The average behaviors of the PEO crystallization and melting confined within thenanostructured particles were studied by using differential scanning calorimetry experiments.For the deeply cross-linkedsample(SCL-1),the crystallization of the PEO blocks was fully confined.The individual nanoparticles only crystallized atvery low crystallization temperatures(T_cs),wherein the homogenous primary nucleation determined the overallcrystallization rate.For the lightly cross-linked sample(SCL-2),the confinement effect was T_c dependent.At T_c(?)42℃,thecrystallization and melting behaviors of SCL-2 were similar to those of the pure PEO-b-PB diblock copolymer.At T_c>42℃,SCL-2 could form PEO lamellae thicker than those of the pure PEO-b-PB crystallized at the same T_c.     

聚碳酸亚丙酯对聚(β-羟基丁酸酯-β-羟基戊酸酯)结晶行为的影响

用FTIR和DSC研究了PHBV及其与聚碳酸亚丙酯(PPC)熔融共混样的熔融结晶行为和等温结晶动力学.结果表明,PHBV与PPC熔融共混过程中发生了酯交换反应,两组分间存在一定的相互作用.PPC虽然能降低PHBV结晶折迭链的表面自由能,但同时也能够降低PHBV的结晶度、球晶径向生长速率、平衡熔点和结晶能力.     

Influence of Nucleation Agents Concentration on Crystallization Structure and Properties of Glass-ceramics

Deep color glass-ceramics is prepared by using gold tailings as the main raw material, and Cr2O3 is added as nucleation agent. Influence of different Cr2O3 additions on crystallization structure and properties of CaO-MgO-Al2O3-SiO2 glass-ceramics has been discussed so as to select optimum additions. DTA is employed to determine optimum crystallization and nucleation temperatures; XRD and SEM are used to characterize microstructure of each sample; and performance indexes, such as water absorption, bulk density, flexural strength and so on, are also determined. Experimental results show that when 3wt% Cr2O3 is introduced, fine glass-ceramics with diopside as the main crystal and Ca-Fe diopside as the second-crystal is obtained, and its corresponding performance indexes are as follows: water absorption 0.12%, bulk density 2.56 g/cm3, and flexural strength 70.01 Mpa.     

分形理论及其在高分子科学中的应用

介绍了分形的基本概念，分形维数的定义及计算方法，讨论了近年来分形理论在高分子科学研究方面的一些应用，内容主要包括高分子溶液、高分子材料的磨损，断裂及界面，高分子结晶过程、导电高分子等。